FUYU Rev1 Solder PCB dead?
Hi,
I purchased a Fuyu Rev1 off GEON's site, flashed it using the solderable .uf2 file & Vial does not want to recognize it. Using the Vial web app will cause it to hang on "starting up" for a while & the desktop app does not work at all.
I also cannot flash it via QMK because the file could not be downloaded from the QMK repo.
P
Poohβ’31d ago
Hello,
Do you happen to have the same symptoms if you try with this file?
N
neilβ’31d ago
Just realized it was my cable being plugged into a KVM instead of directly to my computer π€¦π»ββοΈ
Thanks for your help!
Is there a version of this file that is not locked? I can't seem to unlock my PCB after recognition to test the matrix
P
Poohβ’31d ago
I'll ask the PCB fabricator for help.
@harky
H
harkyβ’31d ago
You can unlock it by shorting the escape and enter key at the same time
I can compile a firmware with no lock for you but its probably easier if you just find another set of tweezers
let me know what works for you
N
neilβ’30d ago
Shorting both keys didnβt seem to work but I just tested & compiled a custom file through QMK. Appreciate the help all!
H
harkyβ’29d ago
:bcaThumbsUpYes:
Want results from more Discord servers?
More PostsRaptor HE switches questionHi, i was reading comments on zfrontier that said the Raptor HE swicthes were manufactured by Grain ProtagonistProtagonist κ·Έλ£Ήλ°μ΄ νμ΄μ§λ μμ§ μ μ΄λ¦°κ±΄κ°μ?fbb ν€μΊ‘ 2μ μ€μλΆν° μμ°¨μ
κ³ λ¬λλ° μμ§λ μλλ°μ..μΈμ μ―€ λ€μ΄μ¬ μμ μΈκ°μ??νμ΄κ±°λΌμ΄νΈ80 via νμ΄λ§ μ§λ¬ΈjsonνμΌκ³Ό rgbνμΌ λ£μμ΅λλ€
λΉμ μμΉλλ°μ΄μ€ νλ©΄μμ λμ΄κ°μ§ μμ΅λλ€
μ§μ¨ μ€λ§νΈμ€ν μ΄μμ μ° μμ§λΉ νμ΄νΌλ³΄λ§ κΈ°νμ
λλ€λλ€λ°μ€ μ§λ¬ΈκΈμΌ λλ€λ°μ€ 곡μννμ΄μ§μΈκ°μ λ€μ΄λ²μ€ν μ΄ μΈκ°μ?μμ¬ ννμ΄μ§ μ£Όλ¬Έ μ·¨μμ£Όλ¬Έμ λ£μλ μλͺ» λ£μλ€λ©΄ νΉμ μ΄λ»κ² μ·¨μλ₯Ό νλμ§ κΆκΈν©λλ€.4μ30μΌλ λλλλ F1 V2 λ©ν°μλμ
300κ° μμ¬λͺ°μμμ§ννλμμλλ©΄ μμ λλ‘ λ€μ΄λ²μ€ν μ΄μμμ§ννλμ?
λ€μ΄λ²μ€ν μ΄ λλ곡μ§νμ
¨μλ κ°κ²©λ³΄λ€
μμ¬λͺ°μ 곡κ°λκ°κ²©μ΄ μν λλλ°
κ°κ²©μΈμλ건μ§λ κΆκΈν©λλ€!μ§μ¨μμ€ κΈ°νμ€μμ μ 무μ μμ κΈ°ν μλμμ§μ¨μμ€ κΈ°νμ€μμ μ 무μ μμ κΈ°ν μλμ?(νμ°μ§,ν‘μμ¬)λ...μ΄ μ ν κ΅λ΄ μ
κ³ κ³ν μλμ??μ΄λ° μ ν μ λ§ μ νκ² μ°Ύκ³ μμλλ° ν΄μΈ μ§μ¨μ μ΄λ―Έ
λμ¨ μ νμ΄λλΌκ΅¬μ!!
μ λ§ μ§μ¬μΌλ‘ ꡬ맀νκ³ μΆμλ° κ΅λ΄ μ
κ³ κ³ν μμκΉμ?λ² λ νμ¨μ΄ κ°μ΄λλ₯Ό λ΄€λλ° μ²μμ μ μ μ°κ²°ν΄λ RPI-RP2 νλ©΄μ΄ λ¨μ§μλλ° μ΄λ»κ²ν΄μΌ νμ¨μ΄ λ°μμμμκΉμ?γ
ν΄λΌμ°λλμΈ ν€λ³΄λλ μμ¬μ΄νΈ 곡μ μμ μΈκ°μ?μμ μ λ°λͺ¨ νμ΄μ§μμλ λ³Έ κ²λ κ°μλ° μ€μΌμ₯΄μμ λΉ μ Έμμ΄μ ... νΉμ μλ‘λ§λμ GBμ© μ¬μ΄νΈμμ GB μμ μΌκΉ κΆκΈνλ€μλ λ―ΉλΌ 2R μ§λ¬Έλ립λλ€λ€ν¬ μνν· μλλ° λν¨λ λ€ν¬ μνν·μμλμ?Protagonist GBHi, I saw on Protagonist main website that Geon would be the regional vendor for KR. I'll just ask wλ² λ he tkl f12 νΈν νμ°μ§μ§κΈ pcb,보κ°ν,μ€μμΉ,μ€ν
λΉ λ±
νμ°μ§μ μ μΈν λͺ¨λ ꡬμ±νμ΄ μλλ°
νμ°μ§μ΄ μμ΅λλ€...
μν μμ μΈ f1 v2 μ f1 v2 λ©ν° λ₯Ό μ‘΄λ²μ€μΈλ°
λλ€ μ€ν¨νλ€λ©΄ κ·Έλ₯ λΆνλ‘κ·Έ λ μ λΌ f13λ νΉμ κ³νμλ μμΌμ€κΉμνμ΄κ±°λ λ¨μ’
μμμ΄κ³ f13 λ² λμ μν νμ°μ§μ΄ κ±°μ μμΌλ.. νΉμ νμλΌλ κ³νμ΄ μμΌμ μ§ κΆκΈν©λλ€F2-60 HHKBHello! Just joined the discord server and wanted to check when the F2-60 would release? It says on F1 v2 μμ½κ΅¬λ§€μ λ©ν° λλκ΄λ ¨μλ
νμΈμ, νΉμ F1 v2 μμ½κ΅¬λ§€ μΌμ (4/5~)κ³Ό λ©ν° μΈμ€ν λλ μΌμ (4/30)μ΄ κ²ΉμΉ νλ₯ μ΄ μμκΉμ?
μꡬλ μ°Έμ¬νκ³ λ©ν° μΈμ€ν λλλ λ λ€νλ©΄ μ’κ² μ§λ§,
λ©ν° μΈλ² λhe 60λ°°μ΄λ² λ μμκΈ°ν 60λ°°μ΄ μλ―Έλμ©λ λ§λμλμ?venom heλ mxλ μ±λ₯ μ°¨μ΄κ° λ§μ΄ λκ² μΆμκ° λ 건κ°μ?mxκ° λ§μ΄ μ’κ² λμ€λ©΄ μ‘΄λ² νλ €κ³ μμμ€ν¬ f1 νλ©΄μ²λ¦¬ λ¬Έμλ λ μμμ΄ μλ
Έλ€μ΄μ§μΈκ°μ?