Do you mean the castle swith depress? The trim is a 4 way switch, no depress.
Do you mean the castle swith depress? The trim is a 4 way switch, no depress.
MThe trim is a 4 way on the hornet, it's a 5 way on the Eagle, and the switch itself is from Otto is a 5 way
MED Forums
Thrustmaster mods --------------------------------------------- F/A-18C (Hornet) grip upgrades OTTO P1 push buttons | OTTO T4 trim switch | OTTO T5 sensor control switch F-16C (Cougar) grip upgrades OTTO P1 push buttons A-10C (Warthog) grip OTTO P1 push buttons | OTTO T4 trim switch | OTTO T4/T5 ...
M2 more hype!
BIs it? I didn't know that. Thanks for the link! I'm toying with the idea of it but not decided yet
MGood luck, finding a used one is not easy, and they are like $400USD new lol
B
II wish, but mine is still 4 away. I should have clarified a bit
IOnly a few more days though!
SJust got my Rhino and thinking of ways to mount it to the next level racing Boeing seat. Looked through search but didn't find any answers..anything have a good solution?
Cthose of you using TM grips with your Rhino, what extension are you using? Preferably one that's in stock somewhere?
SSearch QR4RIGS. Loads of different mounting solutions that suit lots of different rigs.
S@Skood interesting, never heard of that but will give it a look.
Still looking for anyone who have a good solution for a NLR seat.
Still looking for anyone who have a good solution for a NLR seat.
RThingiverse
It's free, but feel free to donate/tip if you like what you see, thank you!
https://www.paypal.me/defnot4beer
Check this also https://www.thingiverse.com/thing:3580027
Ps2 connector https://www.aliexpress.com/item/32827138560.html
Added 180-250mm versions for makis2811
Added 390-400mm versions for Gregkar
https://www.paypal.me/defnot4beer
Check this also https://www.thingiverse.com/thing:3580027
Ps2 connector https://www.aliexpress.com/item/32827138560.html
Added 180-250mm versions for makis2811
Added 390-400mm versions for Gregkar
Thingiverse
50 / 75 / 100 mm extensions for Warthog and Virpil joysticks.
They should be printed with supports over 65 deg to avoid supports in the threads.
14/05/19
Added versions with 15deg grip twist to the left.
They should be printed with supports over 65 deg to avoid supports in the threads.
14/05/19
Added versions with 15deg grip twist to the left.
AHas anybody modified their rhino base to give freedom of movement along all four corners? I have noticed that my rhino has pretty restricted movement in each corner, making simultaneous full elevator and aileron deflection impossible
Safter the telemFFB bupdate, Im getting this:
S
S
SThis also happens when freshly installed build ee7488b9
FYou might want to limit the throw of the axis via software if that bothers you
Sthank you
WYou can use axis scaling feature at something like 90-95%
SMy only idea so far is using a monstertech mount upside down like this. Anyone tried that?
Phey m8 this might not be the best solution but it may get you through in the mean time; try a large piece of plywood on the floor under your pit, have 4 holes drilled in it & use some bolts to mount the Rhino to it. This would depend on being able to remove/move the horizontal support bar in front of the seat.
V:package: 
RHINO #0472 Has Shipped!
RHINO #0472 Has Shipped!
SLeeeeeets gooooo
DYes, it will work just fine. I have the monster tech plate mounted backwards on my motion simulator and it has not moved or come loose yet.
SGlad to hear! I will try this out.
SYeah I was thinking of floor mounting it like that. Though it will sit too low, even with a 200mm extension, so I'd have to raise it up some.
V:package: 
RHINO #0473 Has Shipped!
RHINO #0473 Has Shipped!MLet’s goooooo so pumped
MOne more a that will be me, c´mon please 
STomorrow
Pget a long bit of ply flooring & cut the extra length off the end then cut into Rhino base sized bits & use wood glue to create a stack under the Rhino base, this will get you going until you find a better solution
V:package: 
RHINO #0474 Has Shipped!
RHINO #0474 Has Shipped!MTHAT´S ME!!! THAT´S ME!!!!
HCongrats
SMan u lucky :poggerschelm3m: today is a 3 rhino day
MYes, exactly 
INext Rhino to go out is mine baby.
MThat´s correct, Mav first, Ice second - you can be my wingman anytime
I
SLets see if that works again: "tomorrow" looks if a 4. Rhino gets shipped today :gigakekw:
IA 4 rhino day would be a special day
MIt will not work that way, I said please
V:package: RHINO #0475 Has Shipped!
RHINO #0475 Has Shipped!IIt happened.
I4 rhinos in one day
IPumped af. What a beautiful morning.
MCongrat