Hi, I'm going to repost a question I wrote yesterday, in case anyone has any input. My place in the

Hi, I'm going to repost a question I wrote yesterday, in case anyone has any input.

My place in the queue is coming up and I need to make the purchase decision. I searched for Puma and found scant few messages. I'm assuming no one here has incorporated the Puma controls into a Rhino setup? If anyone has, any comments would be appreciated, as I would prefer to continue to use the Puma, along with the Rhino on the cyclic. Thank you.

Ppapiplanes Where’s the preorder list?

Dovivan•4/10/24, 8:39 PM

Write " /info: your email "

DDovivan Write " /info: your email "

papiplanes•4/10/24, 9:00 PM

Oh I was referring to the mfg list to order, or does that command display the information for the FFB MFG kit?

Mmmcmah Hi, I'm going to repost a question I wrote yesterday, in case anyone has any inp...

PiNKSH!T•4/11/24, 2:57 AM

hey m8, won't be able to give you a full answer but, I know the Rhino will work with Thustmaster & Virpil out the box, it will also work with grips that use a shiftregister (though it may need to be a certain type) If you are getting really close you miht consider pinging Walmis for an answer directly? Good luck my, all I can say is no matter what get the Rhino, obviously after the wait time & also the fact I'd rather have the Rhino & figure a way to make it work in my set up rather than not have it, especially if you fly helos, it is a total game changer

Boo Berry•4/11/24, 3:50 AM

Is there a way to set a dead zone for the Rhino in the software vs. the game. For example if I'm using force trim there is ever so slightly a bit of play that is detected center of where ever the stick rests (left, right or anywhere) off center. If you set a deadzone in game it only seems to detect that deadzone when the stick is centered.

PPiNKSH!T hey m8, won't be able to give you a full answer but, I know the Rhino will work ...

mmcmahOP•4/11/24, 4:59 AM

Thanks mate. Will do.

-= RedBaron =-•4/11/24, 3:11 PM

Anyone use the Rhino is side stick mode like F-16 or F-35?

--= RedBaron =-Anyone use the Rhino is side stick mode like F-16 or F-35?

Chuff•4/11/24, 3:17 PM

I have a real simulator mkII ultra that I use for the f16. Far and away the best option for that plane.

--= RedBaron =-Anyone use the Rhino is side stick mode like F-16 or F-35?

Asdforce•4/11/24, 4:30 PM

I've got mine on the side, along with a TM F-16 grip. It's fine for me, though I've been thinking of center mounting the Rhino and buying a realsim base for F-16 stuff.

哲

哲也•4/11/24, 5:20 PM

I think f16 is better with fssb.

Stryker990•4/11/24, 8:49 PM

does the Winwing F-16EX grip vibration motor still work with the WW adapter?

AndyHill•4/11/24, 8:52 PM

I don't think it does

AndyHill•4/11/24, 8:53 PM

but I don't really know

CChuff I have a real simulator mkII ultra that I use for the f16. Far and away the best...

Duchess ✈•4/11/24, 9:24 PM

I am still waiting for them to get the MKII back in stock so I can order.

Chuff•4/11/24, 9:38 PM

Realsim mfssb and the rhino are definitely my two best flight sim purchases. Covers all of my bases, and the f16 and the tomcat are both so much more fun to fly now. Both worth their high cost and then some.

Chuff•4/11/24, 9:40 PM

Currently have the TM grip on my realsim base and debating buying one of their grips if they ever come back into stock. Not sure. I don’t really love the idea of all the buttons being hat switches, but the grip just looks incredibly nice

Bozo VFA-86•4/11/24, 9:58 PM

CChuff Currently have the TM grip on my realsim base and debating buying one of their g...

Duchess ✈•4/11/24, 10:26 PM

I currently have the WW FSSB with their F-16 grip. Perfectly happy with the grip.

Duchess ✈•4/11/24, 10:28 PM

The whole setup is really the way to go…. WW FSSB, WW TQS and the WW ICP, p,us the TM F-16 MFD frames.

SStryker990 does the Winwing F-16EX grip vibration motor still work with the WW adapter?

TrigaNZ•4/11/24, 10:48 PM

--= RedBaron =-Anyone use the Rhino is side stick mode like F-16 or F-35?

Col. Sanders•4/12/24, 2:20 AM

I use side stick, works best with my setup and find it to work extremely well.

Will3D•4/12/24, 4:00 AM

I own a VP DIY kit with BLF86 motors and have been very happy with the performance. With the addition now of the telemetry software I feel it offers incredible performance.

Will3D•4/12/24, 4:01 AM

I also own a set of Brunner yoke and pedals. However I am playing with the idea of selling these to build VPforce based replacements.

Will3D•4/12/24, 4:04 AM

Mainly due to the Brunners not giving any actual feedback, only simulated from speed or engine rpm.

Will3D•4/12/24, 4:06 AM

Question 1. What is the current wait time for kits ?

Will3D•4/12/24, 4:11 AM

2. Anyone have experience with both ? Thoughts ? Silly idea? just stick with Brunner ( pardon the pun)

Lance•4/12/24, 8:11 AM

what is this like ojn f16s and f18s? is this more more helis only? i fly both. just found out about these 30 mins ago. i only know about virpil and winwing

VPforceBot•4/12/24, 8:18 AM

:package:

RHINO #0482 Has Shipped!

Lance•4/12/24, 8:37 AM

anyone know what the wait time is for one of these? or where i can look to find out

Fierce_Fire•4/12/24, 8:45 AM

!status

FFierce_Fire !status

VPforceBot•4/12/24, 8:45 AM

Hey @Fierce_Fire,
So the last Shipped RHINO is #0482 on 2024-04-12
Average waiting time from preorder to shipped is 210 days, median is 217 days, max is 407 days
475 Rhinos are shipped in total

Lance•4/12/24, 8:49 AM

sick

Lance•4/12/24, 8:49 AM

some type of ai bot

Fierce_Fire•4/12/24, 8:51 AM

It's not ai but it's a bot yes

VPforceBot•4/12/24, 8:58 AM

:package:

RHINO #0483 Has Shipped!

Lance•4/12/24, 9:00 AM

damn they really be shipping this many per day lol

Lance•4/12/24, 9:00 AM

is there a group or place to buy a used one? theres all kinds of places to buy used winwing stuff

Fierce_Fire•4/12/24, 9:06 AM

Unfortunately vpforce isn't that big and most users are too happy with their purchase so used ones are spontaneous, there is the option of DIY though

Lance•4/12/24, 9:12 AM

ill take longer then just waiting the 300 days LOL

Fierce_Fire•4/12/24, 9:16 AM

There are guides, only thing you need then is a 3d printer, or a friend with one

Fierce_Fire•4/12/24, 9:16 AM

You can also have a company print them for you

VPforceBot•4/12/24, 10:19 AM

:package:

RHINO #0484 Has Shipped!

VVPforceBot :package: 🇧🇷 **RHINO #0482** Has Shipped!

Carmel•4/12/24, 10:37 AM

Its mine! So excited!

VPforceBot•4/12/24, 12:55 PM

:package:

RHINO #0485 Has Shipped!

CCarmel Its mine! So excited! ❤️🚀 🇧🇷

Lance•4/12/24, 3:03 PM

how long did it take you lol

Lance•4/12/24, 3:04 PM

im confused why it takes so long if they are shipping out like 15 of these things a day lol

Stryker990•4/12/24, 3:06 PM

3 a workingday is a good day and even then its like 100s of preorders b4 u so it takes quite sum time

WWill3D Question 1. What is the current wait time for kits ?

mechsicko•4/12/24, 3:08 PM

No wait time on kits but the big motors are still out of stock but expected soon

Lance•4/12/24, 3:10 PM

so are these all kits that are shipping out? ive seen like 10 ship already since 1am

Fr4Ged•4/12/24, 3:27 PM

you might have been confusing the emotes with the units.
four units have been sent today.
there are hundreds in the queue. that is why it takes like half a year.
they are being manufactured by a small team.

Stryker990•4/12/24, 5:31 PM

wait if i have lets say a endstop of 75% do i need to take away the last 25% of the ingame axis (DCS) to get full range of motion ingame?

Hi, I'm going to repost a question I wrote yesterday, in case anyone has any input. My place in the

Similar Threads