Hi there, there are 2 kits: 399 and 150. Check this form with the information about them: https://do

Hi there, there are 2 kits: 399 and 150. Check this form with the information about them: https://docs.google.com/forms/d/e/1FAIpQLScJy9f571afga-yYYOE5eqiEacWpqE3UigkC1hfQy6szQnN3g/viewform

Google Docs

VPforce MFG FFB Kit Preorder

Enter your details here, so you can enter the queue for the VPforce MFG FFB Kit.
Once the queue progresses I will get in touch with further details.

The kit contains:
86BLF03 or 86BLF04 FFB motor
Large gear + 14T motor pulley
Belt HTD5M 400
Motor mount + fasteners
Assembled wiring
Toe brake connectors to VPforce board
Power supply - 19V 9.5A 18...

GGarrafaBr Hi there, there are 2 kits: 399 and 150. Check this form with the information ab...

PiNKSH!T•4/22/24, 11:34 AM

oh thanks m8, where was that in the faq?

PPiNKSH!T oh thanks m8, where was that in the faq?

GarrafaBrOP•4/22/24, 11:54 AM

I didn't see it in the faq, only published here in General by Walmis.

GGarrafaBr I didn't see it in the faq, only published here in General by Walmis.

PiNKSH!T•4/22/24, 11:55 AM

ahh cool, is it pinned? might be handy

PPiNKSH!T ahh cool, is it pinned? might be handy

GarrafaBrOP•4/22/24, 12:12 PM

True, I looked in the Pins but also couldn't find it there.

Asger•4/22/24, 2:24 PM

So beautiful!!!

PPiNKSH!T 🦏 #️⃣ 5️⃣ 0️⃣ 0️⃣ 🎆 🎇 🎆 🎇 🥳 🍻

Booker•4/22/24, 2:33 PM

I'm happy to say I got #500!!!

I asked Walmis to sign it...

Bob Bushman•4/22/24, 2:58 PM

Will have to mount it in a display case, and order another one then

BBob Bushman Will have to mount it in a display case, and order another one then

HornetDRIVER•4/22/24, 3:03 PM

HHornetDRIVER Click to see attachment

Bob Bushman•4/22/24, 3:04 PM

and he immediately stashes it in a warehouse to never be seen again

Stryker990•4/22/24, 4:30 PM

Inb4 its slips out of his hands the moment he gets his hands on it and it just shatters into a million pieces :gigakekw:

j9murphy•4/22/24, 5:13 PM

is there any problem/conflict in using the vpforce ffb stick with motion platforms (sending telemetry to more than one place at a time in DCS/xplane/msfs)?

Fierce_Fire•4/22/24, 5:14 PM

ive seen a few ppl use it with motion rig so id assume no

Jj9murphy is there any problem/conflict in using the vpforce ffb stick with motion platfor...

smitty•4/22/24, 6:43 PM

works fine in msfs. telemetry goes to vpforce, flypt, simhaptic, SPAD, littlenavmap, and probably a few others i cant remember, without issue

Booker•4/22/24, 7:34 PM

BBooker Empty message

HazardRisk•4/22/24, 8:15 PM

preference

III_Nick_III•4/22/24, 8:45 PM

What sort of wait-times are we at-at the moment?

III_Nick_III•4/22/24, 8:45 PM

as in, if I ordered now would I get it before the end of 2024?

Fr4Ged•4/22/24, 8:49 PM

I have waited basically exactly 6 months so end of 2024 might be possible

III_Nick_III•4/22/24, 8:49 PM

alright that's an insane wait time

III_Nick_III•4/22/24, 8:49 PM

still tempted

III_Nick_III•4/22/24, 8:49 PM

:((

Fr4Ged•4/22/24, 8:50 PM

still shorter wait time than for Phantom and Kiowa Warrior

TonyM•4/22/24, 8:52 PM

Which motors does the Rhino has inside?
2 x 86BLF03?

TTonyM Which motors does the Rhino has inside? 2 x 86BLF03?

Fr4Ged•4/22/24, 8:54 PM

corbu1•4/22/24, 9:27 PM

Rhino is mounted into the simrig

Fr4Ged•4/22/24, 9:38 PM

Nice setup, dude! must be complete at this point!

FFr4Ged Nice setup, dude! must be complete at this point! 😄

corbu1•4/22/24, 9:50 PM

We‘ll see. I have some goodies in my mind

HHazardRisk preference

Booker•4/22/24, 9:55 PM

Yeah, I agree it's a bit vague, but it won't let me edit. I was wondering what length stick extension everyone used.

Ccorbu1 We‘ll see. I have some goodies in my mind 😂

Fr4Ged•4/22/24, 9:55 PM

did you get that aluminium thread mount or did you mount it on the standard one?

corbu1•4/22/24, 9:57 PM

No, it‘s the standard one.

corbu1•4/22/24, 9:59 PM

I don‘t plan changing the extension too often. But I think about getting it.

MaxVonDayGlow•4/22/24, 10:39 PM

FYI if anyone is considering getting a simpit for the Rhino, Simfab has a mount for it now. Just added one to my "DCS" Simfab frame. https://simfab.com/product/vpforce-rhino-ffb-stick-base-bracket/

SimFab and OpenWheeler Officialmanager

Custom Mounting Bracket For VPforce Rhino FFB Stick Base On SimFab ...

This offer is for a custom made bracket kit to retrofit VPforce Rhino FFB base on SimFab framework. Stick base mounts on SimFab seat frame center tube. Bracket replaces and deletes the standard “centered stick lower mount bracket”. Kit has fixed height and no adjustment on seat base height. Overall stick height can be adjusted

MaxVonDayGlow•4/22/24, 10:42 PM

Ccorbu1 Rhino is mounted into the simrig

PlaguedRoo•4/23/24, 1:54 AM

Beautiful! Which limiters did you get for this �� ?

PPlaguedRoo Beautiful! Which limiters did you get for this 🪿 ?

corbu1•4/23/24, 4:12 AM

Thank you! I have 15 degree limiters mounted actually. But I have 11 degree as a fallback as well, but not tried yet.

IIII_Nick_III still tempted

PiNKSH!T•4/23/24, 4:38 AM

just do it, put you're name down, it's not the biggest deal in the world if you have to pull out when it's your time, that's how a lot of ppl jump loike 100 SN# all of a sudden, Walmis cleans up the pre order list. The Rhino is so worth it, if you do more than occasional sim flight & are serious about it & especially if you fly heli's in sim the Rhino is pretty much the single biggest upgrade you could do to your flight sim gear, seriously it is the best feeling base, the FFB effects are just a bonus, the ability to customize the feel of the stick per aircraft & do proper force trim in a heli it's insane!

BBooker I'm happy to say I got #500!!! I asked Walmis to sign it...

ddrake1984•4/23/24, 6:04 AM

wow. he's come a long way, I am #50

PPiNKSH!T Congratulations @walmis SN#.500 that's a really awesome achievement. I hope to ...

ddrake1984•4/23/24, 6:05 AM

I hope he increased the digit count, because my base only has room for 4 digits

HoopDaBoop•4/23/24, 7:59 AM

Patiently waiting. was 724 when I signed up, but it is down to 441 now, Hope I get to see it this year, that would be awesome

HoopDaBoop•4/23/24, 8:02 AM

There was only 1 big jump in the 4 months, otherwise it seems to be 1-2 a day but that seems to have slowed as well recently

Oneill•4/23/24, 8:54 AM

Guys what are the dials on the unit for ?
Just paid for mine instead of a brunner, over £600 cheaper plus import and tax costs on top

.
Looking forward to getting some real feedback from my rig, it’s now cost me £12k

Fr4Ged•4/23/24, 9:02 AM

one of the dials is a pot and you can bind various things to it. per default it is spring gain.
the other red button is a off/on switch basically

VPforceBot•4/23/24, 9:34 AM

:package:

RHINO #0501 Has Shipped!

VPforceBot•4/23/24, 11:46 AM

:package:

RHINO #0502 Has Shipped!

IIII_Nick_III alright that's an insane wait time

WhereNoLarkFlew•4/23/24, 12:12 PM

Just put yourself on the list, doesn’t cost anything.

HHoopDaBoop Patiently waiting. was 724 when I signed up, but it is down to 441 now, Hope I ...

WhereNoLarkFlew•4/23/24, 12:33 PM

You’re in the 380s now

WhereNoLarkFlew•4/23/24, 12:33 PM

Just hasn’t updated yet

HoopDaBoop•4/23/24, 12:59 PM

Awesome

MMaxVonDayGlow FYI if anyone is considering getting a simpit for the Rhino, Simfab has a mount ...

MashedPotato•4/23/24, 1:17 PM

I love that. Was actually talking to the owner when he was designing this (someone else asked for it, and he knew that I made my own) he went through quite a few variations, but eventually settled on doing it exactly how I mounted mine haha

corbu1•4/23/24, 7:51 PM

Did my first flight today with the Rhino installed in the AH-64D in DCS

It‘s so great. Wish I could fly the whole night

Hi there, there are 2 kits: 399 and 150. Check this form with the information about them: https://do

Similar Threads