I mostly fly helos but just took the 16 and a10 for a spin and the stick is really loose in the cent

I mostly fly helos but just took the 16 and a10 for a spin and the stick is really loose in the center. Everything but friction is on 100% in the config, any ideas to tighten the center up?
Edit: I’m flying in dcs

1142nd_Bama I mostly fly helos but just took the 16 and a10 for a spin and the stick is real...

Hiob•7/31/24, 8:38 PM

For the A-10 O don’t know, but for the F-16 I would make the spring sticky and than adjust it to your liking

flasper•8/1/24, 1:52 AM

Is /info not working for anyone else? It keeps saying that the application did not respond when I do it

Fflasper Is /info not working for anyone else? It keeps saying that the application did n...

buzzbomb•8/1/24, 3:59 AM

its working here

VPforceBot•8/1/24, 9:25 AM

:package:

RHINO #0656 Has Shipped!

VPforceBot•8/1/24, 9:25 AM

:package:

RHINO #0657 Has Shipped!

VPforceBot•8/1/24, 9:25 AM

:package:

RHINO #0658 Has Shipped!

Scavenger•8/1/24, 4:09 PM

Hello everyone

sent off my order form today after preordering back in November. Hopefully it ships soon!

Sudeebare•8/1/24, 4:09 PM

The Rhino has mounting holes around its' base and presumably can be fastened to a plywood board or other surface. With the Moza AB9 it seems I would first need to source a mounting plate, find a way to fasten that plate to bottom of the AB9 and then attech to the plywood board I now use with my VKB spring base+extension. I don't see that Moza has considered that kind of setup need.

Scavenger•8/1/24, 4:10 PM

One question about the exposed motors/belts - has anyone had any issues with that? Looks like it might not be the best friend to leg hair...

SScavenger One question about the exposed motors/belts - has anyone had any issues with tha...

DARRYL•8/1/24, 4:17 PM

Or curious pets either. I can imagine a kitten getting a paw pinched badly while the user is in blinded in VR. I think I saw somebody on YouTube had 3D printed some belt guards. And just to keep it clean also, mounted as low as it must be.

Number481•8/1/24, 4:18 PM

https://discord.com/channels/965234441511383080/1169287017268531225

https://discord.com/channels/965234441511383080/1212035455764144209

Stryker990•8/1/24, 5:17 PM

for a moment i thought i actually damaged my rhino yesterday it had like substantial resistance to the left yeah i would say that happens in u accidentally put balance spring to 80 instead of 8% xD

Xaero Zero•8/1/24, 5:56 PM

I think going forward Walmis needs to develope an aluminium enclosure (press fit), and make his lovely thing as neat as at least Moza did

Xaero Zero•8/1/24, 5:57 PM

that will boost company quite well, in terms of becoming less DIY to more streamlined production.

Xaero Zero•8/1/24, 5:58 PM

I don't think having a alu casing is big deal for everyone who owns Rhino (best piece of equipment and softare), but it surely will compete on different markets

Xaero Zero•8/1/24, 5:59 PM

at some point Walmis will get bought by Corsair, so make it purchase bigger

Xaero Zero•8/1/24, 6:01 PM

Virpil was one guy thing (so does VKB), that ended up as industry leading companies

Xaero Zero•8/1/24, 6:02 PM

otherwise the Chinese will eat you up

Xaero Zero•8/1/24, 6:04 PM

it's cool tho how USSR guys kep doing Engineering for the world, while rest of best engineers (Germans) are still not in business

Xaero Zero•8/1/24, 6:04 PM

not like Lithuania is USSR anymore, but the mindset of people is still the same

Xaero Zero•8/1/24, 6:05 PM

I'm proud that my Rhino (DIY) made partially in Lithuania, i tell that to everyone who looks at it

Xaero Zero•8/1/24, 6:06 PM

printing designs is easy, these guys who made it possible with hardware and software deserve a every day appreciation

Xaero Zero•8/1/24, 6:07 PM

and ofc Walmis, the man who made the world feel feedback (c) me

Xaero Zero•8/1/24, 6:07 PM

my 2/c, ignore if you can

XXaero Zero it's cool tho how USSR guys kep doing Engineering for the world, while rest of b...

Dracks•8/1/24, 6:45 PM

I agree with you on these points. But I think the big difference is that development starts with smart people, who really care about the product and delivering a really great experience! There are tons of examples, video games, movies, etc...
Then, unfortunately, come the shareholders and their (exclusively?) financial visions.

XXaero Zero I think going forward Walmis needs to develope an aluminium enclosure (press fit...

nubbins•8/1/24, 10:14 PM

having seen what moza looks like inside, I hesitate to use the word neat lol

nubbins•8/1/24, 10:15 PM

metal enclosure would be nicer for disassembly/reassembly cycles than the wood material tho

DARRYL•8/2/24, 1:24 AM

Wood? For real, these things are made of wood?

DDARRYL Wood? For real, these things are made of wood?

Horizon•8/2/24, 1:35 AM

The outside is

Haaank•8/2/24, 7:11 AM

Hey, wood is a strong and versatile material that has been used for thousands of years!

HHaaank Hey, wood is a strong and versatile material that has been used for thousands of...

Stryker990•8/2/24, 7:20 AM

The future is now old man who uses wood nowadays /s :MurmKek:

Stryker990•8/2/24, 7:21 AM

Makes sense tho i was always a bit confus who would 3D print boards this large sounds expensive

SStryker990 Makes sense tho i was always a bit confus who would 3D print boards this large s...

Scarlet•8/2/24, 7:37 AM

that's exactly it. At this scale of manufacturing, wood if the best option for (relatively) low precision large flat parts. And hay, if it's good enough for F1 cars

[

[OR] SerGeant•8/2/24, 9:11 AM

The wooden rhino is more rigid than a PETG-CF. So I don’t assume it is inferior to any other material than perhaps a full metal construction.

Hiob•8/2/24, 9:35 AM

A principle in mechanical design is "as rigid as necessary, as light as possible". 3D-prints (PLA, PETG - not even CF) and wood, both fullfill this in case of the Rhino. Using metal is just a matter of design and perhaps manufacturing price.

DDARRYL Wood? For real, these things are made of wood?

LeLv30_Superbus•8/2/24, 12:17 PM

Wait until you see a

with your own

and pet it. It's the perfect choice for reasons stated above.

DDARRYL Wood? For real, these things are made of wood?

Touch_Of_Legend•8/2/24, 12:30 PM

Wood or the DIY are 3d prints or you can have them made in metal but why?

All the case does is hold the motors and fan.

DDARRYL Wood? For real, these things are made of wood?

PiNKSH!T•8/2/24, 12:31 PM

you could start replacing the external panels with 3d printed if you'd like.

Touch_Of_Legend•8/2/24, 12:33 PM

For me it’s always going to be the allure of DIY and how the words sing in my ears when my kids say…

“Daddy built that.. and that and that and that”

Touch_Of_Legend•8/2/24, 12:34 PM

So for sure I do it for me but I’m actually trying to show them that ANYTHING they can dream they can build or they can be

buzzbomb•8/2/24, 2:14 PM

btw...made mostly out of wood and hugely successful...

DDARRYL Wood? For real, these things are made of wood?

Bob Bushman•8/2/24, 2:18 PM

We have 1000 year+ old wooden structures still standing.

Just keep it dry.

DDARRYL Wood? For real, these things are made of wood?

Bob Bushman•8/2/24, 2:20 PM

Yoy could also look at the MFG crosswinds, also "wood" but a resin mdf that rival solid aluminium for hardness, although if you knew anything about metals its about the same hardness as frozen butter.

Bob Bushman•8/2/24, 2:25 PM

As for interesting materials.
Check out Pykrete and "Project Habakkuk"

Lt_Dan•8/2/24, 2:27 PM

It’s not just wood it feels like it’s laminated maybe very strong and looks professional like a mass produced product

Number481•8/2/24, 2:31 PM

Its MDF painted with a high quality coating. I honestly thought it was injection molded plastic until I first took off the boot plate to mount the limiter plates where you can see exposed MDF in the screw holes.

Bob Bushman•8/2/24, 2:45 PM

Its a curse of the day, if most people hear "wood" they start thinking "IKEA mdf" which is less like wood and more like painted cardboard.

Alighierian•8/2/24, 2:59 PM

Basically the same thing as 'metal = quality'.

It highly depends on the actual material, manufacture, processing/finishing, and assembly.

Stryker990•8/2/24, 3:07 PM

anybody got a good MSFS2020 A320 telem confic?

BBob Bushman Its a curse of the day, if most people hear "wood" they start thinking "IKEA mdf...

Lt_Dan•8/2/24, 3:15 PM

Or one of them sh@£t kitchens from Wrens

I mostly fly helos but just took the 16 and a10 for a spin and the stick is really loose in the cent

Similar Threads