The TelemFFB app is now always opening off right side of the screen (I can see a fast animation of t

The TelemFFB app is now always opening off right side of the screen (I can see a fast animation of the window zooming to the right). I’ve reinstalled it, but it doesn’t help. I’ve tried changing resolution but it doesn’t help. I can’t access its window for obvious reasons. Any ideas?

FFarFutureFox The TelemFFB app is now always opening off right side of the screen (I can see a...

Number481•8/5/24, 1:53 PM

For now, you can delete the saved window location key from the registry. Next version will prevent the window placing itself on a 2nd screen x,y if that screen is no longer connected. https://discord.com/channels/965234441511383080/1230919462144835674/1269309404474249366

Niko•8/6/24, 4:26 PM

Can someone explain to me the button mapping in the FFB Configurator? When I go to set keybinds in the simulator, some buttons aren't registering and some are registering the same button for different buttons (a 5 way hat will register the same button for two different directions)

Bambusa•8/6/24, 4:46 PM

I’m having issues getting DCS to recognize the vkb gunfighter mcg ultimate and the rhino. Any help would be greatly appreciated

BBambusa I’m having issues getting DCS to recognize the vkb gunfighter mcg ultimate and t...

LeLv30_Superbus•8/6/24, 4:53 PM

Hi! What seems to be the problem? Does MCGU show up in Windows game controllers? Do you use Loopback grip type in VPforce configurator? Is your blackbox blinking?

LeLv30_Superbus•8/6/24, 4:56 PM

What about Windows?

LeLv30_Superbus•8/6/24, 4:59 PM

Ok the grip should been seen in DCS too. What do you get in DCS? Rhino and MCGU or just one of them - or neither?

LeLv30_Superbus•8/6/24, 5:01 PM

I forgot to ask : does your Rhino+MCGU work in any other sim?

LeLv30_Superbus•8/6/24, 5:03 PM

So you get both Rhino and your grip in DCS now that you removed the file?

LeLv30_Superbus•8/6/24, 5:04 PM

Ok your VPforce configurator settings, please?

LeLv30_Superbus•8/6/24, 5:05 PM

Can you just Shift-Win-S the Settings and Effects pages please

LeLv30_Superbus•8/6/24, 5:06 PM

(Looks like F-14 rather than 18 config, but you should still feel a lot)

LeLv30_Superbus•8/6/24, 5:07 PM

I think you pasted Effects twice

LeLv30_Superbus•8/6/24, 5:08 PM

F/A-18 has trim implemented by ED you can uncheck that Harware trim

LeLv30_Superbus•8/6/24, 5:11 PM

I'm not seeing any obvious problem here...

You X-axis is inbverted (but Y is not which is unusual if you have a stock Rhino)

Original message was deleted

LeLv30_Superbus•8/6/24, 5:12 PM

not at this point, it's extra. Make sure everything works first, then install TelemFFB

LeLv30_Superbus•8/6/24, 5:13 PM

and you have not inverted X-axis in DCS?

LeLv30_Superbus•8/6/24, 5:16 PM

if you have a F/A-18 button assigned to Rhino, ignore it. Your Rhino doesn't have ANY buttons. It only has pitch and roll.

LeLv30_Superbus•8/6/24, 5:16 PM

so it doesn't do anything. You can clear all Rhino's buttons if you ONLY use VKB grips.

LeLv30_Superbus•8/6/24, 5:17 PM

I use grips from 3 manufacturers so I do need double bindings.

LeLv30_Superbus•8/6/24, 5:18 PM

If your problem at this point is that TelemFFB installation breaks all effects you probably should continue here 📟telemffb-user and ask Number481 what you should do

Original message was deleted

LeLv30_Superbus•8/6/24, 5:19 PM

You don't get any spring force?

LeLv30_Superbus•8/6/24, 5:20 PM

Then it's not time to install TelemFFB yet

LeLv30_Superbus•8/6/24, 5:22 PM

Try changing your Spring gain map to 100% you have it at only 50%

LeLv30_Superbus•8/6/24, 5:22 PM

(though you should still feel 50% x 69% which you have set your pot)

LeLv30_Superbus•8/6/24, 5:24 PM

actually it's not gain map

LeLv30_Superbus•8/6/24, 5:25 PM

If you look at roll in VPforce configurator, is the movement normal there?

LeLv30_Superbus•8/6/24, 5:26 PM

Check your DCS axis tuning

LeLv30_Superbus•8/6/24, 5:26 PM

Does it move normally there?

LeLv30_Superbus•8/6/24, 5:27 PM

They are not in VKB they are in Rhino

AndyHill•8/6/24, 5:27 PM

why would you map pitch and roll on vkb

LeLv30_Superbus•8/6/24, 5:27 PM

VKB is just the grip, so no axes there. Check it in Rhino which has X and Y (and nothing else)

LeLv30_Superbus•8/6/24, 5:28 PM

No worries

LeLv30_Superbus•8/6/24, 5:28 PM

So check axis tuning on Rhino X & Y next

LeLv30_Superbus•8/6/24, 5:31 PM

It moves the same way it does in VPF config?

LeLv30_Superbus•8/6/24, 5:31 PM

in axis tuning?

LeLv30_Superbus•8/6/24, 5:34 PM

What does this look like on yours?

LeLv30_Superbus•8/6/24, 5:34 PM

this is from my 18

LeLv30_Superbus•8/6/24, 5:36 PM

also have you checked there are no other controllers with X-axis assigned

LeLv30_Superbus•8/6/24, 5:36 PM

like a throttle

LeLv30_Superbus•8/6/24, 5:37 PM

or a wireless gamepad in the next room

Original message was deleted

LeLv30_Superbus•8/6/24, 5:38 PM

better in which way? is there any spring force?

LeLv30_Superbus•8/6/24, 5:40 PM

On pitch and roll both?

LeLv30_Superbus•8/6/24, 5:41 PM

Did you try changing this 50% -> 100%

LeLv30_Superbus•8/6/24, 5:42 PM

actually the other ss has it at 100% so you apparently did

LeLv30_Superbus•8/6/24, 5:43 PM

so... what problems remain? Can you describe the roll feel now?

LeLv30_Superbus•8/6/24, 5:44 PM

ok great

LeLv30_Superbus•8/6/24, 5:44 PM

next steps: test it properly with all modules and then install TelemFFB

LeLv30_Superbus•8/6/24, 5:45 PM

Depends on the DCS module

LeLv30_Superbus•8/6/24, 5:45 PM

18 doesn't have much as it shouldn't.

The TelemFFB app is now always opening off right side of the screen (I can see a fast animation of t

Similar Threads