Signalk gps to nmea2000
I trying to get the “position feature” in Venus os to work. This is supposed to work with a nmea gps, but it’s not working for me at least. A possible workaround could be to send out a compatible gps signal from signalk.
According to victron the gps signal must contain
Instead of a USB GPS, a NMEA 2000 GPS can be used for remote vehicle or boat tracking in the VRM portal.
The third party NMEA 2000 GPS sender must meet the following requirements:
The NMEA 2000 device class must be 60, Navigation.
The NMEA 2000 device function must be 145, Ownship Position (GNSS).
Position (latitude, longtitude) must be transmitted in PGN 129025.
Height, which is optional, must be transmitted in PGN 129029.
Course and speed (both optional), must be transmitted in PGN 129026.
Most NMEA 2000 GPS-es are expected to work. Compatibility has been tested with:
Garmin GPS 19X NMEA 2000
Does not look like signalk to nmea2000 is sending pin 129025 am I correct?
Could 129025 be added? Or am I missing something here?
——————
Hmm I se 129025 in the code so I guess it is transmitted?
According to victron the gps signal must contain
Instead of a USB GPS, a NMEA 2000 GPS can be used for remote vehicle or boat tracking in the VRM portal.
The third party NMEA 2000 GPS sender must meet the following requirements:
The NMEA 2000 device class must be 60, Navigation.
The NMEA 2000 device function must be 145, Ownship Position (GNSS).
Position (latitude, longtitude) must be transmitted in PGN 129025.
Height, which is optional, must be transmitted in PGN 129029.
Course and speed (both optional), must be transmitted in PGN 129026.
Most NMEA 2000 GPS-es are expected to work. Compatibility has been tested with:
Garmin GPS 19X NMEA 2000
Does not look like signalk to nmea2000 is sending pin 129025 am I correct?
Could 129025 be added? Or am I missing something here?
——————
Hmm I se 129025 in the code so I guess it is transmitted?
