![Rat Rig Community [Unofficial]](https://cdn.discordapp.com/icons/582187371529764864/08375bea6b5b9088b6d4cfc2b6e25fba.webp?size=48){kind=icon}
V Chonk bed tramming
Hi everyone, I have a pretty big issue on my V-Chonk. I just finished building it, wiring everything up (it works) and I can't figure how to make the bed even with the gantry (for reference what you do via the z tilt on the v core).
I tried lowering it all on the base, but when it goes up it slightly loses the squareness, I tried leveling it manually with the toolhead rotating the M8 screws but the tolerance is still too high.. I don't know what to do. Like this is unusable. I run the stock setup (SKRat with no toolboard), 2 TMC5160 for XY and 2209 for the rest.
If anyone can help me I'd be extremely happy
I tried lowering it all on the base, but when it goes up it slightly loses the squareness, I tried leveling it manually with the toolhead rotating the M8 screws but the tolerance is still too high.. I don't know what to do. Like this is unusable. I run the stock setup (SKRat with no toolboard), 2 TMC5160 for XY and 2209 for the rest.
If anyone can help me I'd be extremely happy
![Rat Rig Community [Unofficial] banner](https://cdn.discordapp.com/banners/582187371529764864/4ee3e42e227d6aac26f048a3e69d5924.webp?size=480)
![Rat Rig Community [Unofficial]](https://cdn.discordapp.com/icons/582187371529764864/08375bea6b5b9088b6d4cfc2b6e25fba.webp?size=16){kind=icon}