Yeah it's not that, trim is full nose down and it'll still pitch up
Yeah it's not that, trim is full nose down and it'll still pitch up
HThat's definitely not correct then. Does the trim really work? Is the controls overlay showing the trimmed position moved forward?
ETrim works, its just ineffective compared to the stick movement
HI will have look tonight. I fly the Phantom often and never noticed any issue with FFB or trim. Something is off here, but we'll get to it eventually.
ETook the F14 out, flies nice and straight
EF4 shows stick centered, but now the diagram in VPF is showing even higher
EF4 is effectively pulling straight back, to get level flight I need to do this with my stick
ESpecial options is as shown, I'm not sure if anything in here needs tweaking
HTry to disable the stick force blending and see if it makes a difference. Only option that could be related as far as I can tell. By the way, the little diamond in the overlay is the trim position.
Eyeah, hence why its still strange that it pulling nose up
EIts definitely isolated to the Rhino, I pulled out the usb and just plugged it directly into the pedals and I get normal flight
E
HAre you using TelemFFB?
Eyeah
Hcan you try without?
Egimme a few
HAnd can you make a screen of all the settings pages of VP config please?
HEffects and Settings that is
EIm still trying out all the effects and sliders and seeing what they're doing so it may look all over the place
ENo change with TelemFFB off and F4 is actually way worse with stick blending off
HTwo thoughts about your VP config settings. Why would you activate axis scaling and then put it to 100%? I'd recommend deactivating it. Second. Putting mastergain to 80 and spring gain to 100 is kind of inverted. It should be the other way round. There is very few reasons if any to touch master gain ever.
HOther than that, nothing jumps my eye, that could be related to your issue with the F4.....
HFrom a gameplay approach. Is there a particular speed and power setting (afterburner perhaps) where the uncommanded pitch up is particularly pronounced? Are you loaded heavily or lightly with fuel/weapons?
HAnother side note regarding the special options for the F-4. You can set the FFB gain for pitch and roll above 100 (up to 500 iirc).
EAs mentioned I'm new and I'm trying a bunch of things out.
EAs soon as I load into a clean jet
HYou mean in an air start? What happen when you start from the ground?
HJust a random idea. There is a setting like "match controls at mission start" or something along those lines in the game options. What have you set there? Does it make a difference if you change it?
EGood question, I'll have a go
SWhy you have the y axis disabled and y motor offline?
SOh, right 
H@EnvyC I totally missed that you only use FFB pedals. Has nothing to do with pitch problems then of course (assuming you haven't bound the pitch axis to the pedals 
). Doesn't make much sense the to search in VP config for the culprit then..... maybe it is the combination of FFB on with a spring loaded stick that get's the F-4 confused. Rather unique to use FFB-pedals and no FFB stick......
). Doesn't make much sense the to search in VP config for the culprit then..... maybe it is the combination of FFB on with a spring loaded stick that get's the F-4 confused. Rather unique to use FFB-pedals and no FFB stick......
NThere's no point having FFB enabled in DCS at all if you don't have a joystick. It doesn't support pedals so you aren't gaining anything by having it enabled. TelemFFB will provide the necessary effects regardless of the FFB setting in DCS.
Pretty sure there's a known issue with the F-4 when FFB is enabled but a non FFB joystick is being used. This Thread has several things going on in it (more with the FFBBeast software), but one of the original things was that the trim is all messed up when using a non FFB joystick with FFB enabled.
Pretty sure there's a known issue with the F-4 when FFB is enabled but a non FFB joystick is being used. This Thread has several things going on in it (more with the FFBBeast software), but one of the original things was that the trim is all messed up when using a non FFB joystick with FFB enabled.
ED Forums
A known issue is the constant pitching up that comes when force feedback is active. solution is to switch it off. Problem is: I have the FFBeast and use force feedback. The interesting thing is, that this pitching up is not happening on my second PC ( a laptop with DCS installed) that never had a...
CIn telemffb can you change settings without having to restart the game?
HYes
HSame for VP config
CI might be the most inept person on this discord, but telemffb isn't talking to dcs
CI'm afraid that did not work
C
HTry to update or re-install and when asked if it should update the export lua click yes.
Cit didn't give me that option
Cseems as though a reformat is in my future
Nnah.., that would be a waste of time.. did you try this step that fourgrinder pointed you to?
- A relatively easy thing you can try is this: Rename your saved games/DCS folder to something like DCS.saveme. Then start DCS and let it create a new file structure. Then load TelemFFB and let it install the export script and modify the export lua. Restart DCS and load into an aircraft and see if the telemetry starts flowing or if you get the same error in the log. All your bindings will be gone since they are stored in DCS folder you renamed, but this is just a test and you can delete the new DCS folder and rename your old one back
Cyep tried that
Cdoes this software prefer windows 10 or 11?
HDo you have any other programs that rely on the export.lua of DCS? Like a buttkicker or winwing peripherals?
NDoesn't care.
After you changed the savegames folder name and let DCS create a new one, did you install any other mods or anything?
Remember you have to restart DCS after the first time you install the export script from TelemFFB. After it exists in export.lua, if TelemFFB were to update the export script in a future update, you only need to start a new flight for it to pick up the updated script.
After you changed the savegames folder name and let DCS create a new one, did you install any other mods or anything?
Remember you have to restart DCS after the first time you install the export script from TelemFFB. After it exists in export.lua, if TelemFFB were to update the export script in a future update, you only need to start a new flight for it to pick up the updated script.
CNope, just launched the sim and picked an instant mission
NMight help if you post a clean copy of the dcs log here when running with the clean save games folder.
- Shut down DCS
- delete the dcs.log in the logs folder.
- Start TelemFFB
- Start DCS
- Start a flight
Cokie dokie