Yeah, not sure I see the point of remote start. Don't really see a reason to start the car unless I'

Yeah, not sure I see the point of remote start.
Don't really see a reason to start the car unless I'm in it.

But cruise control, is a huge QOL improvement.
Only time I'm not using it is roundabouts, near speedbumps and bumper traffic.

And it's part of the basic package for my little vw up.

Vakarian•12/26/24, 5:32 PM

Start the car up early during the winter/colder times so it heats up a bit before getting in it?

Bob BushmanOP•12/26/24, 5:55 PM

That's why you have electric engine block heaters on a timer, or secondary heater on the diesel line.
Besides haven't really had much issues starting fuel injected cars unless it gets below -25c.

My brother in laws volvo had one of those APU style engine/cabin heaters, sure nice to get it warmed up.

But as it is a volvo there was a glitch in the fuel gauge, so as soon as temps hit -8c the car thought it had no diesel and refused to start it, so you had to start the main engine anyway.
And honestly that's basically when you started needing it in the first place.

BBob Bushman Yeah, not sure I see the point of remote start. Don't really see a reason to sta...

Red Magic•12/26/24, 6:30 PM

Remote start is too preheat the car

Red Magic•12/26/24, 6:31 PM

Was at my aunt/uncles yesterday for Christmas and my mom remote starts her car

Red Magic•12/26/24, 6:32 PM

I walk outside, get in, clutch, start, come back inside. "That's how I remote start mine"

Bob BushmanOP•12/26/24, 6:36 PM

Aye, I remember being my dad's automatic ice scraper as well

FFierce_Fire I presume the 30kg is with trim. For the pinky feel people are talking with trim...

Sudeebare•12/26/24, 10:39 PM

So "pinky" pressure while holding down the trim button I understand. When hand on stick to adjust pitch or trim without touching the trim button tough, the normal situation, could a 30's Nm max force be needed or even possible? I'm assuming that there must be enough built-in resistance to prevent unintended motion.

SSudeebare So "pinky" pressure while holding down the trim button I understand. When hand o...

Fierce_Fire•12/26/24, 10:41 PM

It is definitely not neccesary, or possible with the rhino. Its not 30Nm though, its 30Kg at 300mm, or ~90Nm

Fierce_Fire•12/26/24, 10:42 PM

but thats for the real life AH-64, while I find my ~5kg quite hard to move

FFierce_Fire It is definitely not neccesary, or possible with the rhino. Its not 30Nm though,...

Sudeebare•12/26/24, 10:50 PM

Of course those high force levels are not possible for Rhino or ffBeast. So my takeaway then is that, when the trim button is not being depressed, any spring stiffness that does not create a motor overheat situation or impede aircraft controlability is reasonable(?)

Fierce_Fire•12/26/24, 10:51 PM

guess so

Fierce_Fire•12/26/24, 10:51 PM

Personally I make it possible to move a little bit, as the low force from deactivating trim makes hovering quite hard

ReapDaddy•12/26/24, 11:07 PM

Walmis- Thank you and everyone at VP Force for this wonderful gear. I received my base about two months ago, but it was a Christmas present so I have only gotten to mess with it for parts of two days now. WOW, I am absolutely impressed with not only the hardware, but also the FFB Configurator and TeleFFB both up and functioning without issue. Don't get me wrong I am sure that I will be changing things as I get to know FFB better, but this experience has been fantastic. I have been flying mostly rotors lately and this has been a HUGE switch in control, to the better. I am sure I am not the only one that wishes I could have skipped all the other joystick bases on my journey to this piece of art. It just works! Beautifully. Thanks again! I am now waiting on my FLNKR grip that is to be paired with it.

MMerc Hey all, I already got my Rhino awhile back but just now making my mount and coc...

ReapDaddy•12/26/24, 11:12 PM

If you got the TM Warthog grip it would recognize natively. They are the same grip layout (A10/F16). I am actually using my old TM Cougar grip until my FLNKR arrives.

RReapDaddy If you got the TM Warthog grip it would recognize natively. They are the same g...

Merc•12/26/24, 11:23 PM

I know the Rhino supports the TM gear, but am looking to see what the adapter is that I need to make the Rhino work with the WinWing stick as a possible upgrade. WinWing's TM adapter is sold out on their site and looks like it won't be coming back from what I could see, but IDK if that's the one needed to work with the Rhino.

MMerc I know the Rhino supports the TM gear, but am looking to see what the adapter is...

ReapDaddy•12/26/24, 11:33 PM

VPForce sells a WinWing adapter

FFierce_Fire Personally I make it possible to move a little bit, as the low force from deacti...

Red Magic•12/26/24, 11:40 PM

This is what I do as well. If I'm trimming to go into a hover, the hover mode frequently wants to wig out and increase its oscillation until it turns off and get a SAS saturated message. So now when I trim for a hover, I keep putting some input in to manually dampen the oscillation so it stabilizes

Hammer 1-1•12/27/24, 2:21 AM

how well does it work in the apache?

Hammer 1-1•12/27/24, 2:21 AM

also I have a vkb, where would I find an adapter for that stick?

Hammer 1-1•12/27/24, 2:22 AM

supposedly Im #1038 and hopefully will be getting mine in the next month or so, so getting stoked myself

Hammer 1-1•12/27/24, 2:23 AM

ordered in august

Blaubär | Michael•12/27/24, 9:29 AM

When will the new software be released as stable?

HHammer 1-1 also I have a vkb, where would I find an adapter for that stick?

Fr4Ged•12/27/24, 11:07 AM

it does work very well with any DCS helicopter.
Walmis sells the grip adapters as well. you can choose options once you are up for the order.

Vulture•12/28/24, 9:14 PM

Quick question: do you guys turn off power to your Rhino when not in use by pressing the Panic Button on the base?

VVulture Quick question: do you guys turn off power to your Rhino when not in use by pres...

Boggy•12/28/24, 9:45 PM

I do

Boggy•12/28/24, 9:46 PM

And I always turn the force to minimum. I'm worried it will snap up when I start a mission and smack me in the balls!

VVulture Quick question: do you guys turn off power to your Rhino when not in use by pres...

kaltokri•12/28/24, 10:04 PM

I have my Rhino things on a switchable power socket which I always switch off when I don't need them.

Boggy•12/30/24, 1:57 PM

Probably a dumb question but, do you need to start VPForce every time you want to use the Rhino with DCS?

Bob BushmanOP•12/30/24, 2:00 PM

Not necessarily required but handy for tweaking, logging potential bugs etc

Telemffb needs to run for sim connectivity and effects beyond native directx effects.

Nomna•12/30/24, 5:49 PM

Is there a buy/sell part of this discord or do people do that elsewhere for rhino bases?

NNomna Is there a buy/sell part of this discord or do people do that elsewhere for rhin...

Flo-Soft•12/30/24, 11:05 PM

I think you will find some answers in the faq section ❓faq

Fr4Ged•12/30/24, 11:15 PM

pretty sure he is asking for used ones

PiNKSH!T•12/31/24, 5:21 AM

Any news on the VPforce MFG crosswind kit?

Red Magic•12/31/24, 5:23 AM

Yeah I'm wondering the same

Red Magic•12/31/24, 5:24 AM

It's been i think 12 months now since I last saw an update on it from Walmis

Red Magic•12/31/24, 5:25 AM

All I've seen in between then and now is some other guy giving instructions in a thread on this server but I haven't seen any official word on the actual kit since

TonyM•12/31/24, 6:41 AM

Also waiting patiently for the VPforce MFG Crosswind kit.

kaltokri•12/31/24, 8:13 AM

Hiob provide DIY instruction to build a RhinoMFG and I provide a MFG DIY kit.
I mention this quite unselfishly.

VPforceBot•12/31/24, 11:49 AM

:package:

RHINO #0848 Has Shipped!

VPforceBot•12/31/24, 11:49 AM

:package:

RHINO #0847 Has Shipped!

VPforceBot•12/31/24, 11:49 AM

:package:

RHINO #0849 Has Shipped!

VPforceBot•12/31/24, 12:04 PM

:package:

RHINO #0850 Has Shipped!

Red Magic•12/31/24, 3:17 PM

theProduceBroker•12/31/24, 3:18 PM

spam

corbu1•12/31/24, 3:19 PM

What is this solara thing here on all channels?

Red Magic•12/31/24, 3:20 PM

Don't think I've ever seen a bot do spam though. I usually see hacked ppl accounts do it

Alighierian•12/31/24, 3:27 PM

Eh, different kind of bot:
General support thingy/Discord plugin vs program that uses new and/or hacked accounts to post stuff as quickly as possible.

Kkaltokri Hiob provide DIY instruction to build a RhinoMFG and I provide a MFG DIY kit. I ...

Dracks•12/31/24, 6:01 PM

Without wishing to praise the creators, the kit and instructions are really well done and assembly is simple! You can take a look in the dedicated sub!

WhereNoLarkFlew•12/31/24, 8:59 PM

I'm having issues getting the brake axis to show up on the constellation alpha - any ideas?

H145Rotor-Sims•12/31/24, 9:55 PM

I know alot of you are in other time zones etc, wishing you all a Happy & Healthy New Year!

Yeah, not sure I see the point of remote start. Don't really see a reason to start the car unless I'

Similar Threads