Software Engineering Courses (SECourses)•10mo ago

where do find the logs ?

xlads•3/12/25, 1:23 PM

okay i terminated pod but i do have a storge hopefully it didnt delted my files or trained models

Xxlads okay i terminated pod but i do have a storge hopefully it didnt delted my files ...

Renzo•3/12/25, 1:25 PM

Did you save the files in the network storage?

Renzo•3/12/25, 1:26 PM

IIRC, the network storage is mounted at a specific location.

TTria where do find the logs ?

Furkan Gözükara SECourses•3/12/25, 1:32 PM

shown in every tutorial

Furkan Gözükara SECourses•3/12/25, 1:32 PM

i recommend watch this one

Furkan Gözükara SECourses•3/12/25, 1:32 PM

https://youtu.be/-zOKhoO9a5s

YouTubeSECourses

Stable Diffusion 3.5 Large How To Use Tutorial With Best Configurat...

Stability AI published their most power newest model Stable Diffusion 3.5 Large. This model unlike FLUX is full model not distilled and has huge potential. I have done extensive research and publishing all of it in this video regarding how to use SD 3.5 Large with the best settings. Moreover, I am sharing how to use FLUX DEV with the best possib...

Xxlads okay i terminated pod but i do have a storge hopefully it didnt delted my files ...

Furkan Gözükara SECourses•3/12/25, 1:32 PM

it wont

Furkan Gözükara SECourses•3/12/25, 1:32 PM

it was a permanent storage

vp•3/12/25, 1:43 PM

doc i have a question - trying to resume a kohya ss finetune. but when i load the last training state it still goes back to step 1 as if it is retraining from scratch

Vvp doc i have a question - trying to resume a kohya ss finetune. but when i load t...

Furkan Gözükara SECourses•3/12/25, 1:44 PM

it will show as 1

Furkan Gözükara SECourses•3/12/25, 1:44 PM

but will continue from last

Furkan Gözükara SECourses•3/12/25, 1:44 PM

so reduce number of epochs

vp•3/12/25, 1:46 PM

ah ok. thank you

MMetaKan Hello, I have my model trained with a character, but I'm having trouble getting ...

vp•3/12/25, 1:55 PM

i had a windows update kill my session overnight around 3am so if you were running this on windows it's likely the operating system started doing funky stuff and threw this off.

FFurkan Gözükara SECourses it was a permanent storage

xlads•3/12/25, 1:55 PM

which video do you reccomend i watch so that i can run swarm_ui in runpod?

Xxlads which video do you reccomend i watch so that i can run swarm_ui in runpod?

vp•3/12/25, 1:59 PM

go to his page on youtube and watch the full swarmui playlist. you have to watch the windows stuff to learn all the tidbits.

Xxlads which video do you reccomend i watch so that i can run swarm_ui in runpod?

Furkan Gözükara SECourses•3/12/25, 2:13 PM

https://youtu.be/XFUZof6Skkw

YouTubeSECourses

How to Use SwarmUI & Stable Diffusion 3 on Cloud Services Kaggle (f...

In this video, I demonstrate how to install and use #SwarmUI on cloud services. If you lack a powerful GPU or wish to harness more GPU power, this video is essential. You'll learn how to install and utilize SwarmUI, one of the most powerful Generative AI interfaces, on Massed Compute, RunPod, and Kaggle (which offers free dual T4 GPU access for ...

JaviEM•3/12/25, 2:16 PM

I'm trying wan 2.1 with FP8 and it doesn't work. I have tried everything and it still doesn't work. No torch version works, neither stable nor nightly. I even tried to install an older version of the autoinstaller with a same day commit with the same problem. I think the latest nvidia drivers have broken something. FP16 works perfectly, but it takes 1,5h to generate a video from an image.

JJaviEM I'm trying wan 2.1 with FP8 and it doesn't work. I have tried everything and it ...

Furkan Gözükara SECourses•3/12/25, 2:19 PM

i am testing fp8 it is working for me on rtx 5090 and 3090 ti. let me test again

FFurkan Gözükara SECourses i am testing fp8 it is working for me on rtx 5090 and 3090 ti. let me test again

JaviEM•3/12/25, 2:19 PM

with latest nvidia drivers?

JaviEM•3/12/25, 2:20 PM

I have a 4080

Furkan Gözükara SECourses•3/12/25, 2:21 PM

JJaviEM with latest nvidia drivers?

Furkan Gözükara SECourses•3/12/25, 2:21 PM

572.60

Furkan Gözükara SECourses•3/12/25, 2:22 PM

ye both 3090 ti and 5090 working

FFurkan Gözükara SECourses 572.60

JaviEM•3/12/25, 2:22 PM

572.70 here

JJaviEM 572.70 here

Furkan Gözükara SECourses•3/12/25, 2:22 PM

i will update lets see

Furkan Gözükara SECourses•3/12/25, 2:22 PM

but i dont think will break

Furkan Gözükara SECourses•3/12/25, 2:22 PM

did you make entirely fresh install?

JaviEM•3/12/25, 2:23 PM

with previous drivers was working fine. Now it doesn't work

JJaviEM with previous drivers was working fine. Now it doesn't work

Furkan Gözükara SECourses•3/12/25, 2:25 PM

ok let me update maybe they truly broken

Furkan Gözükara SECourses•3/12/25, 2:25 PM

you can return back to older driver easy

FFurkan Gözükara SECourses you can return back to older driver easy

JaviEM•3/12/25, 2:26 PM

I'll try to back to older drivers later

JaviEM•3/12/25, 2:27 PM

I'm testing img to video btw, I don't know if other models has the same issue

TriaOP•3/12/25, 2:31 PM

@Dr. Furkan Gözükara how can i know if the model i donwloaded is corrupt ?

TriaOP•3/12/25, 2:31 PM

i didn't use your script but manually downloaded using idm

TTria @Dr. Furkan Gözükara how can i know if the model i donwloaded is corrupt ?

Furkan Gözükara SECourses•3/12/25, 2:35 PM

it would give error while loading

Furkan Gözükara SECourses•3/12/25, 2:35 PM

but best way is check their sha256

Furkan Gözükara SECourses•3/12/25, 2:35 PM

hugging face shows

JJaviEM I'll try to back to older drivers later

Furkan Gözükara SECourses•3/12/25, 2:37 PM

just tested WAN 2.1 14B Image-to-Video 480P even with LoRA

Furkan Gözükara SECourses•3/12/25, 2:37 PM

no errors

xlads•3/12/25, 2:39 PM

14:36:40.846 [Error] [WebAPI] Error handling API request '/API/GenerateText2ImageWS' for user 'local': Internal exception while handling prior exception closure: System.Net.WebSockets.WebSocketException (0x80004005): The WebSocket is in an invalid state ('Aborted') for this operation. Valid states are: 'Open, CloseReceived, CloseSent'
at System.Net.WebSockets.WebSocketValidate.ThrowIfInvalidState(WebSocketState currentState, Boolean isDisposed, WebSocketState[] validStates)
at System.Net.WebSockets.ManagedWebSocket.CloseAsync(WebSocketCloseStatus closeStatus, String statusDescription, CancellationToken cancellationToken)
--- End of stack trace from previous location ---
at SwarmUI.WebAPI.API.HandleAsyncRequest(HttpContext context) in /workspace/SwarmUI/src/WebAPI/API.cs:line 165
14:38:26.237 [Info] Generated an image in 2.62 min (prep) and 67.91 sec (gen)

xlads•3/12/25, 2:40 PM

getting this error after trying to genrate image

TriaOP•3/12/25, 2:41 PM

its not corrupt

TriaOP•3/12/25, 2:41 PM

idk why its not working

TriaOP•3/12/25, 2:41 PM

...

xlads•3/12/25, 2:41 PM

i know what i happened i think

xlads•3/12/25, 2:41 PM

trying again

xlads•3/12/25, 2:43 PM

working

xlads•3/12/25, 2:43 PM

:)))

JaviEM•3/12/25, 2:44 PM

I just rendered my first fp16 video on wan 2.1 and quality is great (far better than fp8) but last 1,5h to generate it. I need the Teacache update

where do find the logs ?

Similar Threads