VC4 500 IDEX
I am trying to get my bed as flat as possible. After working on both corners this is my best try at this moment. Is this ok for a 500 IDEX or does anyone have tips to achieve a better result? Heightmap is generated with a cold bed, probe is a beacon.
1 Reply
Seems like your gantry is sagging a little bit. Which should only happen when the machine is warm. Other than the high point in the middle, it looks pretty normal. Look at the mesh like it’s mirrored from the gantry rail. So high in the middle on the mesh means the tool head itself is low to the bed in that area. And high on the edges.
Have you done a bed mesh with the machine heat soaked?