Offset between walls and solid infill
Hello, I do have a massive problem with my printer. Its an IDEX500 And I have a difference between T0 and T1.
1. When printing with T1, I got massive waves of resonance within the print. But this is only to the extrusion, not due to wrong input shaping. It seems like the extruder has a resonance, not the toolhead.
2. I get an offset between walls and solid infill while printing with T1 only. the comparison between the gcode preview what the printer thinks its printing and the actual print is attached. If the printer is printing in copy or mirror mode, there is no offset between walls and the solid infill.
The PA settings are the same for both printheads.
the question is now: what is wrong here?
Solution:Jump to solution
Problems solved! The reason for the offset between the walls and the infill was broken raspberry PI.it seems like that the raspberry gave wrong comments to the main board for the second print head, the first print head absolutely fine but the second didn’t. I can’t explain why this happened but after switching to another PI 4B the problem was gone. This leads to the conclusion that the raspberry PI could lead to such issues.
4 Replies
This is the copy mode
This is a test print with T1 and T0 printing a cube. The 2nd layer looks completely off. No idea why.
Solution
Problems solved! The reason for the offset between the walls and the infill was broken raspberry PI.it seems like that the raspberry gave wrong comments to the main board for the second print head, the first print head absolutely fine but the second didn’t. I can’t explain why this happened but after switching to another PI 4B the problem was gone. This leads to the conclusion that the raspberry PI could lead to such issues.