![Rat Rig Community [Unofficial]](https://cdn.discordapp.com/icons/582187371529764864/08375bea6b5b9088b6d4cfc2b6e25fba.webp?size=48){kind=icon}
RatOS-v2.1.0-RC2 No boot
I have trouble upgrading from RatOS 1.0 to newest version.
I downloaded the RatOS img file and verified the sha256.
First installed the image on a new brand 64GB sdcard using dd: it creates two partitions and it looks fine, but it cannot boot my rpi3b. (permanent red led, no green blinking)
Then i used BalenaEtcher with the same image and got the same result - I even tried three different sdcards. (including a new Sandisk as recommended)
I tried to see if they would boot an rpi5 i had laying around..No cheese...
I tried using rpi-imager with "custom image" a few times and got the same result
finally i tried a Raspbian image with rpi-imager: and that worked perfectly.
I am using a little older BalenaEthcer 1.14.3 (which I used for RatOS 1.0), as the most recent version have issue running on my Debian system.(2*fake dependency issues and a real graphical issue)
a few times during this I verified that my old RatOS 1.0 sdcard still worked.
Any suggestions?
What route should to take:
1. try older RatOS release
2. build-RatOS-from-scratch
3. skip RatOS and build manually on a Rasbian (which I know fairly well)
(all this work is due to and update that killed KlipperScreen in RatOS 1.0 - note to self: NEVER update working stuff...)
I downloaded the RatOS img file and verified the sha256.
First installed the image on a new brand 64GB sdcard using dd: it creates two partitions and it looks fine, but it cannot boot my rpi3b. (permanent red led, no green blinking)
Then i used BalenaEtcher with the same image and got the same result - I even tried three different sdcards. (including a new Sandisk as recommended)
I tried to see if they would boot an rpi5 i had laying around..No cheese...
I tried using rpi-imager with "custom image" a few times and got the same result
finally i tried a Raspbian image with rpi-imager: and that worked perfectly.
I am using a little older BalenaEthcer 1.14.3 (which I used for RatOS 1.0), as the most recent version have issue running on my Debian system.(2*fake dependency issues and a real graphical issue)
a few times during this I verified that my old RatOS 1.0 sdcard still worked.
Any suggestions?
What route should to take:
1. try older RatOS release
2. build-RatOS-from-scratch
3. skip RatOS and build manually on a Rasbian (which I know fairly well)
(all this work is due to and update that killed KlipperScreen in RatOS 1.0 - note to self: NEVER update working stuff...)
![Rat Rig Community [Unofficial] banner](https://cdn.discordapp.com/banners/582187371529764864/4ee3e42e227d6aac26f048a3e69d5924.webp?size=480)
The #1 unofficial Rat Rig Community on Discord!
14,034Members
Resources
Similar Threads
Was this page helpful?
![Rat Rig Community [Unofficial]](https://cdn.discordapp.com/icons/582187371529764864/08375bea6b5b9088b6d4cfc2b6e25fba.webp?size=16){kind=icon}