Anyone experience this?
After the commissioning guide I’ve been
struggling to get any good prints. Am I missing something simple?
-Vcore 4, 400 IDEX
-Using Prusa Slicer 2.9.0 with the RatRig profiles (tried the beta profile as well)
-HeightMap made with and without heat soak.
-Completed the Extruder Calibration from Ellis’s guide
Any help is much appreciated
4 Replies
dry filament?
Also, triple check that you're using a 0.4 nozzle and that thats what is set in slicer/ratos
Also pls use the correct sock on your rapido
It could be that If the Fan Kicks in hard it cools.the Front down
OH! yeah, good eye @CubeMaster . That sock is the short one, you need to use the UHF sock that will cover the adapter nut and nozzle better
You guys are awesome!! I triple checked the slicer and the nozzle size is set right there, I tried another filament while I dry the petg more, and put the big socks on and that did the trick!! I still have some calibrations to do but this is huge! Thank you, @TheTik and thank you, @CubeMaster
