First layer issues Looks to close and to far away at the same time.
Rat rig vcore 3.1 300mm
Beacon bed sensor
Rest stock.
This printer keeps being weird. This is the layer exactly after the beacon calibration. A couple of months ago i had the same. but I dont use this printer very often so never really fixed it. But right now it seems the nozzle is to close ? when you look at the scuff center left. But when you look at the layer line at the most right part of the cube it just did not adhere. Telling me that the nozzle is to far away >?
9 Replies
Is the printer enclosed?
Nah its not. I figured out that i had to go even closer with the nozzle. The weird thing is that the right wall still does not adhere correctly. So I think my bed is mega warped.
Usually a problem like this is related to the bimetal effect (the gantry continues bowing after the bed mesh, so bed mesh is no longer correct)
But it is more prominent in enclosed printers than open ones
Have you cleaned your build plate?
Yeah i have wit iso propyl alcohol but also dish soap
It might sound like a joke, but I can really recommend putting it in the dish washer
Of course without any dishes and at the maximum temp
For me this works like a charm if some sections seem to lack adhesion
Unfortunatly i dont have one hahah. But im not sure if its the plate. Maybe its the bed thats mega warped i can post a heighmap
Rotate the plate by 90° and look if the problem shifts with it
smart idea I will do that