![Rat Rig Community [Unofficial]](https://cdn.discordapp.com/icons/582187371529764864/08375bea6b5b9088b6d4cfc2b6e25fba.webp?size=48){kind=icon}
Rat Rig seemed to lose track of the toolhead during a Z-tilt
I was originally filming the Z-tilt to capture the squeaks that happen during Z-tilt. Then this happened: https://youtube.com/shorts/362bhpukj-I?si=twYM08tg2PXUz-0K
Somewhere in the middle of the Z-tilt process, there was some sort of hiccup, I think during horizontal movement, and then the toolhead stopped probing the correct positions before I did an emergency stop. Unfortunately, the X-endstop got mashed while this was happening, so now it's always triggered, so I can't reproduce this. Any idea what the heck is going on?
BTW, this happened shortly after I made this post: fix-my-meshGantry re-squaring conundrum during 3.2H upgrade
ETA: I forgot to mention this at the time, but I had performance mode turned on during the commissioning.
(Yes, that was stupid.)
Somewhere in the middle of the Z-tilt process, there was some sort of hiccup, I think during horizontal movement, and then the toolhead stopped probing the correct positions before I did an emergency stop. Unfortunately, the X-endstop got mashed while this was happening, so now it's always triggered, so I can't reproduce this. Any idea what the heck is going on?
BTW, this happened shortly after I made this post: fix-my-meshGantry re-squaring conundrum during 3.2H upgrade
ETA: I forgot to mention this at the time, but I had performance mode turned on during the commissioning.
(Yes, that was stupid.)
![Rat Rig Community [Unofficial] banner](https://cdn.discordapp.com/banners/582187371529764864/4ee3e42e227d6aac26f048a3e69d5924.webp?size=480)
motion![Rat Rig Community [Unofficial]](https://cdn.discordapp.com/icons/582187371529764864/08375bea6b5b9088b6d4cfc2b6e25fba.webp?size=16){kind=icon}