![Rat Rig Community [Unofficial]](https://cdn.discordapp.com/icons/582187371529764864/08375bea6b5b9088b6d4cfc2b6e25fba.webp?size=48){kind=icon}
Toolhead temperature off by 40 deg C
I have EBB42 v1.2 with Phaetus Rapido UHF with PT1000b temp sensor. It wasn't extruding right so I checked the temperature with a Fluke Probe. It is 40 degrees off. Mainsail says 290. Fluke has it at 250. Here is the setup:
The thermocouple is using the TH0 connector with a jumper on PT1000 setting. Printer.cfg has:
[extruder]
sensor_type: PT1000
pullup_resistor: 2200
Any help appreciated.
The thermocouple is using the TH0 connector with a jumper on PT1000 setting. Printer.cfg has:
[extruder]
sensor_type: PT1000
pullup_resistor: 2200
Any help appreciated.
![Rat Rig Community [Unofficial] banner](https://cdn.discordapp.com/banners/582187371529764864/4ee3e42e227d6aac26f048a3e69d5924.webp?size=480)
setup![Rat Rig Community [Unofficial]](https://cdn.discordapp.com/icons/582187371529764864/08375bea6b5b9088b6d4cfc2b6e25fba.webp?size=16){kind=icon}