I don't think that's correct. For just the base/grip, use the black connector. I think the red one i

I don't think that's correct. For just the base/grip, use the black connector. I think the red one is if you plug something into the Aux jack of the base (e.g. switch panel). I've never used the red connector as my Shark panel is connected directly via USB.

FlatSpin•1/11/23, 10:29 PM

the aux jack is for slaving panels I believe

FlatSpin•1/11/23, 10:29 PM

what does the manual say?

Bblave549 I don't think that's correct. For just the base/grip, use the black connector. I...

Anthony•1/11/23, 10:41 PM

Yup, there’s no external cable for the grip

TonyZ2525•1/12/23, 12:08 AM

@keem85 Red connector is for plugging into a second USB port for additional power if needed...it is not for data.

FFlatSpin what does the manual say?

keem85•1/12/23, 12:14 AM

manual says nothing about it, hence confusion.i have noidea

VPforceBot•1/12/23, 11:24 AM

:package: RHINO #0036 Has Shipped!

sliphavoc•1/12/23, 4:21 PM

Woo! Unless the serial numbers have changed, that one is mine!

Ssliphavoc Woo! Unless the serial numbers have changed, that one is mine!

walmis•1/12/23, 4:55 PM

Yours is 34

sliphavoc•1/12/23, 6:02 PM

Ah, ok I was starting to wonder, as I got the invoice and tracking number a couple days ago but the #36 hadn't been announced by the bot yet, I guess a couple people must have backed out. Too bad for them, and great for me! I'm really looking forward to having a FFB joystick again after so many years!

JJayPi This base is printed in PLA, 70% infill, 5 massive bottom and top layer. The scr...

roller25.•1/12/23, 10:45 PM

What settings did you use for printing PETG? I'm about to reprint the gimbal as mine finally failed (PLA+).

Ancient Guardian•1/13/23, 1:14 AM

!status

AAncient Guardian !status

VPforceBot•1/13/23, 1:14 AM

Hey @txgunslinger,
So the last Shipped RHINO is #0036 on 2023-01-12
Average waiting time from preorder to shipped is 102 days, median is 110 days, max is 183 days
34 Rhinos are shipped in total

Ancient Guardian•1/13/23, 1:18 AM

VVPforceBot :package: **RHINO #0036** Has Shipped!

amadeus•1/13/23, 2:19 AM

Damn, these things flying off the shelf now!

Boosted•1/13/23, 2:39 AM

only 140 more to go, lol

Original message was deleted

VPforceBot•1/13/23, 3:32 AM

Hey @skete,
So the last Shipped RHINO is #0036 on 2023-01-12
Average waiting time from preorder to shipped is 102 days, median is 110 days, max is 183 days
34 Rhinos are shipped in total

Stoned Kakapo•1/13/23, 5:09 AM

@walmis probably last question until I get invoice

but would I have to submit seperate order for the VKB and winwing adapter to be included?

Stoned Kakapo•1/13/23, 5:10 AM

Oh and for the monstertech mounting plate, I'm assuming monstertech themselves will be selling it at some point?

Rroller25.What settings did you use for printing PETG? I'm about to reprint the gimbal as ...

JayPi•1/13/23, 5:29 AM

Layerheight 0.3mm, infill 100%, cant remember the temperature.

SStoned Kakapo @walmis probably last question until I get invoice 😀 but would I have to submit...

walmis•1/13/23, 5:31 AM

You can select those items during the ordering process

You will get an auto notification once is your turn.

Wwalmis You can select those items during the ordering process 🙂 You will get an auto n...

Stoned Kakapo•1/13/23, 5:45 AM

thank you!

Viktor Martin•1/13/23, 12:43 PM

I feel a bit dumb but I quickly read through the FAQ, is there a way to check your position in the queue? I forgot

VViktor Martin I feel a bit dumb but I quickly read through the FAQ, is there a way to check yo...

walmis•1/13/23, 12:47 PM

Ahh, will need to add this

DM the bot:

!info youremail

!info youremail

Viktor Martin•1/13/23, 12:47 PM

Viktor Martin•1/13/23, 12:50 PM

Awesome it worked, thank you.

Phantom•1/13/23, 1:08 PM

geez, smashing them out Walmis

AsBurli•1/13/23, 6:06 PM

Does anyone have a ready to print holder for the USB jack that shipped with the kit?

Duckdown•1/13/23, 6:15 PM

Does anyone know if we can enable the force feedback effects that you would feel in an analog airplane into fly-by-wire modules like the F/A-18 or F-16?

amadeus•1/13/23, 8:28 PM

new year, new vigor

DDuckdown Does anyone know if we can enable the force feedback effects that you would feel...

FlatSpin•1/13/23, 9:12 PM

The module would need to support it. It's my understanding that the Viper has force sensing but not FFB. The Hornet has none to my knowledge, although I could be wrong. Heatblur seems to be the only one that cares about FFB with the Tomcat module. I suspect we'll see the same with the release of the Phantom.

Duckdown•1/13/23, 9:54 PM

I think you are correct, hence my question. FFB in the modern modules might not be "realistic" but the added immersion would be great if implemented.

Vulcan•1/13/23, 10:24 PM

ED has consistently said even less than a year ago that FFB is not implemented because it is not common enough for them to invest time into

Vulcan•1/13/23, 10:30 PM

Probably the same guys working on vulkan implementation, so we'll see better FFB support in 2030

FlatSpin•1/13/23, 10:30 PM

https://tenor.com/view/two-weeks-gif-24950918

Tenor

Vulcan•1/13/23, 10:32 PM

It's not the end of the world though between hardware trim, flying helo's and the F14 I'm mostly satisfied. I know some people don't like helo modules so it's worse for them

Vulcan•1/13/23, 10:33 PM

Getting a buttkicker, jetseat or motion sim also helps so you get your rumble fix from something other than the stick

Viktor Martin•1/13/23, 11:15 PM

I love flying helis, I'm absolutely god awful and probably the worst pilot known to man, but throwing the Ka-50 around is a blast.

VVulcan ED has consistently said even less than a year ago that FFB is not implemented b...

Viktor Martin•1/13/23, 11:16 PM

Wait, did ED make the 109? If so does that mean FFB wouldn't work wit it?

Duckdown•1/13/23, 11:39 PM

I can share a document later this weekend with a list of the modules and folks with knowledge can say whether FFB is enabled. Would be unfortunate if someone exclusively flies modern modules and gets a joystick that doesn't move!

VVulcan Getting a buttkicker, jetseat or motion sim also helps so you get your rumble fi...

Stoned Kakapo•1/13/23, 11:45 PM

Helis are the main reason I'm getting this, that and for future improvement on the av8b's ffb profile.
Buttkicker and jetseat are such a sick combo, I can't play without them now

Viktor Martin•1/14/23, 1:29 AM

I'm mainly looking forward to having FFB for the 109, since it's my go to warbird.

VVulcan Probably the same guys working on vulkan implementation, so we'll see better FFB...

Phantom•1/14/23, 3:03 AM

Yet the team who did the MB-339 mod (not tried retail version) showed exactly what is possible if you hook up all the bits the FFB code supports "already", and that support is quite exhaustive and detailed and enjoyable, it just seems many 3rd party developers can't be bothered to implement it properly, or lack the knowledge, the 339 mod guys even made ED's implementation look lazy by comparison, this should come as no surprise given that ED still don't have consistent ground collisions working in the Caucus with its own products tho?

VVulcan Getting a buttkicker, jetseat or motion sim also helps so you get your rumble fi...

smitty•1/14/23, 3:41 AM

I’m doing all of the above

Flashgod_VR•1/14/23, 7:46 AM

@viktormartin no worries, all WW2 birds have FFB.

Viktor Martin•1/14/23, 7:46 AM

Viktor Martin•1/14/23, 7:46 AM

That's good to hear!

fiddle11•1/14/23, 11:18 AM

Hi everyboday,

fiddle11•1/14/23, 11:20 AM

Hi again, my simpit is a FW190 using FS9/2004 (WinXP) with a modded MS FFB2. Will it work with the rhins base?

CraptakulaR•1/14/23, 12:32 PM

!status

CCraptakulaR !status

VPforceBot•1/14/23, 12:32 PM

Hey @craptakularuk,
So the last Shipped RHINO is #0036 on 2023-01-12
Average waiting time from preorder to shipped is 102 days, median is 110 days, max is 183 days
34 Rhinos are shipped in total

I don't think that's correct. For just the base/grip, use the black connector. I think the red one i

Similar Threads