Pcool, i'll make sure to test it with .13
Pas far as the udp port: are you saying that the client will pick the unused port dynamically? (I don't see how I can use a specific fixed port in the config, unless it's buried somewhere else)..
Wit's here https://github.com/walmis/VPforce-TelemFFB/blob/master/export/TelemFFB.lua#L17 and here https://github.com/walmis/VPforce-TelemFFB/blob/master/main.py#L89
But it should be free
But it should be free
Pi see it: socket.try(self.sock_udp:setpeername("127.255.255.255", 34380))
Pkewl
P@walmis one more question: looking at config.ini I see [default] section, which I assume is used when a specific aircraft isn't defined (like TF-51S or others in .ini). Can I add engine_rumble variable to [default]? And if yes, how can I modify engine_rumble intensity? I see it's only as true/false ..
WThat one will work only for type=PropellerAircraft and RPM from telemetry must come in RPMs (not percentage)
Pyes, I get that, my question is about its intensity..
PI see it in aircraftas.py:
P
Whttps://github.com/walmis/VPforce-TelemFFB/blob/master/aircrafts.py#L161 <- this here
You can define it in ini file as
You can define it in ini file as
engine_rumble_intensity Pawesome, thank you!
KAnyone know how many units are sent out pr week? Reason I'm asking is not because I'm impatient, but rather opposite. Need to stall a bit due to financial reasons
Kim number 227
F!status
VHey @.flatspin,
So the last Shipped RHINO is #0037 on 2023-01-23
Average waiting time from preorder to shipped is 105 days, median is 110 days, max is 194 days
35 Rhinos are shipped in total
So the last Shipped RHINO is #0037 on 2023-01-23
Average waiting time from preorder to shipped is 105 days, median is 110 days, max is 194 days
35 Rhinos are shipped in total
KOh, tyvm
SI have a setup where it would be much easier for me to mount the base at the level indicated by the red arrows in the picture. What are the possibilities for placing mounting points there? Would it be possible to modify?
(It's a car-seat from an old BMW where I will make a cut-out for the base and sort of "hang" it below the base level of the seat.)
(It's a car-seat from an old BMW where I will make a cut-out for the base and sort of "hang" it below the base level of the seat.)
RCan anyone explain in simpler terms how to get the DCS telemetry ffbs effects working? I have no idea how this python stuff works....
WI'll make an executable later, but to get it running directly from source you need to install Python3 and Git. Open a powershell window and copy paste the instructions 
ROk. Have Python3 installed but not Git. I'd say thats my issue..
Dhurry up and git it
Agit is bae
R@walmis keep getting this when I copy and paste 'pip install -r requirements.txt'
RDisregard. Python not installed correctly
MDoes the mirage f1 feel a bit soggy after the update to others?
RWhich aircraft are supported?
RI have it running but must be missing something.. the small DCS telemetry window is saying its waiting for telemetry...
R(This is with the F/A-18C)
WShould work on all of them. Could you check if the Export.lua and TelemFFB.lua installed correctly in your c/users/you/Saved Games/DCS/Scripts dir?
WAlso dcs.log might give some clues if script has errored out
RI was in a hurry and hadn't really troubleshooted yet. Maybe it lua files didn't go to correct location. Will check soon.
RMy installation is DCS.Openbeta - so it installed wrong location.
Works now. Incredible potentional here @walmis . Loved the feel of the effects. Even if not quite realistic, it certainly felt natural.
Didn't feel any ground roll/touchdown effects with F/A-18C though? I thought those effects applied to all aircraft by default? Also couldn't feel weapon release..
Works now. Incredible potentional here @walmis . Loved the feel of the effects. Even if not quite realistic, it certainly felt natural.
Didn't feel any ground roll/touchdown effects with F/A-18C though? I thought those effects applied to all aircraft by default? Also couldn't feel weapon release..
WDo you have WeightOnWheels data coming?
RFrom memory, I think so. Does it come through as a decimal value? 0 - 1.0? I think I saw 0.81 on ground..
Wyeah, try the TF-51 it should definitely have the rolling rumble
RCan it be manually added for the F/A-18C through the ini?
Wyeah, but rolling effect should be [default]
WDoes the BRRRT work though? 
RIt does, but its hardly noticeable.. very faint. Adjusted the ini from 0.12 to 0.32 and didn't make much difference..
WWhat's the Periodic effects and Constant effect strength in Rhino GUI ?
RMaybe that's it. I'm running 50% periodic...
RConstant effect I think is 0%.
WI tested periodic 50% and constant 100%
WThe rolling effects use Constant, so that maybe it
V:package: RHINO #0038 Has Shipped!
JIt is getting closer, I feel it
SHi there,
I was wondering if the base is producing a lot of vibrations when running.
Thanks
I was wondering if the base is producing a lot of vibrations when running.
Thanks
WHi, depends on the effects. It can shake the stick quite a lot for AoA buffeting for example
Wbut for simple spring/damper it's smooth and silent