A lot of gliders have a trim button that changes the pitch trim to the position that the stick is in

A lot of gliders have a trim button that changes the pitch trim to the position that the stick is in, that's why I'm asking if you can only activate it for one axis.

HHaums A lot of gliders have a trim button that changes the pitch trim to the position ...

walmis•2/12/23, 11:00 AM

Sure, don't see why you couldn't

Wwalmis Sure, don't see why you couldn't

HaumsOP•2/12/23, 11:01 AM

Is that supported by vpforce software?

skyPickle•2/12/23, 5:52 PM

So does the huey module not behave properly? Should I just turn off spring effect for it?

SskyPickle So does the huey module not behave properly? Should I just turn off spring effec...

DrQuinn•2/12/23, 6:13 PM

Not sure about the Huey, but other Bell helicopters I've flown without autopilot IRL, you only use the force trim while on the ground.

SwiftVengeance•2/13/23, 3:35 AM

I can give it a try

SskyPickle So does the huey module not behave properly? Should I just turn off spring effec...

Ye Old Grog•2/13/23, 6:37 AM

I'm thinking it's the in dcs setting. Instead of center trim. I just don't play it enough to say

Wwalmis Do you have "Constant effects" slider turned off by chance?

PiNKSH!T•2/13/23, 9:59 AM

Hey m8, sorry been busy irl. If I enable the constant Force in the effects tab the stick get's pulled to the back right a few degrees, maybe about 10% or so of the total axis movement, this only seems to happen though when I have the end stops enabled. I can post my screenshots of the settings

PiNKSH!T•2/13/23, 9:59 AM

PiNKSH!T•2/13/23, 10:00 AM

walmis•2/13/23, 10:00 AM

Why do you enable constant force?

walmis•2/13/23, 10:01 AM

It's used to counterbalance asymmetric weight, such as Virpil Z extension

PiNKSH!T•2/13/23, 10:02 AM

ahh ok, sorry I must be misunderstanding when you asked if I have "Constant effects" slider turned off by chance?

walmis•2/13/23, 10:02 AM

It's in the Settings tab

walmis•2/13/23, 10:03 AM

Might need to rename things to be more intuitive

PiNKSH!T•2/13/23, 10:03 AM

the problem was I'm not getting any feelings in the f18 of taxi & takeoff rumble, basically only feeling AoA buffeting & gun rumble, is this normal or should I change some settings?

Wwalmis Might need to rename things to be more intuitive 🙂

PiNKSH!T•2/13/23, 10:03 AM

likely more just a me thing

walmis•2/13/23, 10:03 AM

In the settings -> Constant slider should be at max

Wwalmis In the settings -> Constant slider should be at max

PiNKSH!T•2/13/23, 10:04 AM

ahh ok, I'll give this a go & let you know

Wwalmis In the settings -> Constant slider should be at max

PiNKSH!T•2/13/23, 11:06 AM

feels like it's all working now Walmis, thanks again for helping me out. This thing is just so.....

Wwalmis Jumped in the A-10C free flight and yes it's neutral trim is pitched down about ...

AsBurli•2/13/23, 7:31 PM

I don't quite understand. Is this behavior realistic. If I'm honest, it does bother me. Is it possible to correct this in the DCS settings?

Asdforce•2/13/23, 8:20 PM

For what it's worth, MSFFB-stick behaves the same. Neutral position is forward from center.

skyPickle•2/14/23, 1:33 AM

I'm trying to get a handle on some of the telemetry data DCS is sending out. Some aircraft are different than others. So I downloaded and executed Walmis' wonderful VPForce-TelemFFB github. I installed it and got it to run.

skyPickle•2/14/23, 1:33 AM

Here for example is some of the output:

skyPickle•2/14/23, 1:33 AM

But I want to get a 'recording' to compare various aircraft.

skyPickle•2/14/23, 1:34 AM

So I installed teleplot and got it to run as well.

skyPickle•2/14/23, 1:35 AM

I know teleplot is working because this command:

skyPickle•2/14/23, 1:36 AM

echo "myData:1234" | ncat -u -w5 127.0.0.1 47269 actually results in a chart on a browser window opened to 127.0.0.1:8080 (This is the port that the teleplot server uses.)

skyPickle•2/14/23, 1:37 AM

(ncat is the windows version of netcat)

skyPickle•2/14/23, 1:38 AM

But when I start Walmis' FFB-telemetry with this:

skyPickle•2/14/23, 1:39 AM

>python main.py --teleplot "127.0.0.1:47269" The teleplot browser window stays unchanged-as if it's waiting for data.

skyPickle•2/14/23, 1:39 AM

I must be missing something basic and hope someone here can see my mistake-prob a syntax error?

FlatSpin•2/14/23, 2:18 AM

windows firewall?

Khangirey•2/14/23, 2:19 AM

I'm kind of blind, is there a readme for the software? I just got the stick and want to jump in to IL2 immediately

KKhangirey I'm kind of blind, is there a readme for the software? I just got the stick and ...

PiNKSH!T•2/14/23, 2:26 AM

Hey m8 good news is that the RHINO will work out of the box so to say with IL2, IL2 has FFB effects implemented very well including trim moves the stick. What specifically do you need help with m8?

PPiNKSH!T Hey m8 good news is that the RHINO will work out of the box so to say with IL2, ...

Khangirey•2/14/23, 2:27 AM

I'll send you a DM so we don't clog this channel up

KKhangirey I'll send you a DM so we don't clog this channel up

PiNKSH!T•2/14/23, 2:28 AM

yeah you can DM if you like, don't worry too much tough, I've clogged this channel up with many questions! lol

FFlatSpin windows firewall?

skyPickle•2/14/23, 4:02 AM

if it was a firewall entry blocking teleplot then I wouldnt be able to send it data from the command line using netcat.

skyPickle•2/14/23, 4:03 AM

The hercules mod has no FFB. Prob a shortcoming of the mod that doesnt broadcast telemetry

Khangirey•2/14/23, 4:10 AM

my black box is flashing red when I use the VKB adapter

AAsdforce For what it's worth, MSFFB-stick behaves the same. Neutral position is forward f...

AsBurli•2/14/23, 6:50 AM

I find it curious that this is only the case for me with the A10. This does not occur with the F/A18.

walmis•2/14/23, 7:07 AM

also F-5

KKhangirey my black box is flashing red when I use the VKB adapter

Jaeger•2/14/23, 8:22 AM

That's no problem. It just shows that the input from the base is missing, should not affect the stick.

Jaeger•2/14/23, 8:23 AM

Have the same and being able to use the stick, or flash a new one of I change them.

skyPickle•2/14/23, 4:23 PM

When i boot pc, stick thinks it’s centered

skyPickle•2/14/23, 4:24 PM

skyPickle•2/14/23, 4:24 PM

But it is not

skyPickle•2/14/23, 4:24 PM

skyPickle•2/14/23, 4:25 PM

Recalibration is good

skyPickle•2/14/23, 4:25 PM

skyPickle•2/14/23, 4:25 PM

But needed w every pc reboot

A lot of gliders have a trim button that changes the pitch trim to the position that the stick is in

Similar Threads