Software Engineering Courses (SECourses)•3y ago

Hi there, incredible stable diffusion courses. Really appreciate your work. On your video here - ht

Hi there, incredible stable diffusion courses. Really appreciate your work.

On your video here - https://www.youtube.com/watch?v=kIyqAdd_i10

Your Google Collab shows "Install xformers and precompiled wheel". My google collab doesn't have this option, so I'm wondering if this is causing a problem. Picture of my collab below.

YouTubeSoftware Engineering Courses - SE Courses

Stable Diffusion Google Colab, Continue, Directory, Transfer, Clone...

Discord : https://discord.gg/HbqgGaZVmr. This is the video where you will learn how to use Google Colab for Stable Diffusion. If I have been of assistance to you and you would like to show your support for my work, please consider becoming a patron on

https://www.patreon.com/SECourses

Google colab notebook link: https://colab.research.google....

OObey Hi there, incredible stable diffusion courses. Really appreciate your work. On ...

DanielusG•2/12/23, 5:18 PM

you just need to add the --xformers parameter, AUTOMATIC will do the rest

ObeyOP•2/12/23, 5:46 PM

Should I add the --reinstall-xformers or -xformers parameter? I'm not sure if I'm missing it

ObeyOP•2/12/23, 5:46 PM

@DanielusG

ObeyOP•2/12/23, 5:52 PM

Also, I'm not sure where to put it. Could you screen shot where it's at? I added it to my webui-user.bat and it gives an error

DanielusG•2/12/23, 6:05 PM

--reinstall Is used for reinstall. If you never install It, only use --xformers. I execute the UI with python launch.py --xformers, i never use webui bash. So i don't know how to help you

DanielusG•2/12/23, 6:05 PM

But you can try to run with python launch.py like i do

ObeyOP•2/12/23, 7:37 PM

worked, the xforms is in there

Thanks Daniel!

DanielusG•2/12/23, 7:40 PM

ObeyOP•2/12/23, 7:54 PM

I'm trying to google collab from that same course, and I run into this error. Have no idea what to do next.

ObeyOP•2/12/23, 10:16 PM

nevermind, fixed it. Downloaded the file off hugging face and manually added it. Worked

Kruno•2/14/23, 6:45 PM

Hi, if anyone can assist please. I think I don't have enough memory. I have 2xSLI connected Nvidia GTX 970 4GB each

Kruno•2/14/23, 6:45 PM

Kruno•2/14/23, 6:46 PM

OutOfMemoryError: CUDA out of memory. Tried to allocate 64.00 MiB (GPU 0; 4.00 GiB total capacity; 3.33 GiB already allocated; 0 bytes free; 3.40 GiB reserved in total by PyTorch) If reserved memory is >> allocated memory try setting max_split_size_mb to avoid fragmentation. See documentation for Memory Management and PYTORCH_CUDA_ALLOC_CONF

Kruno•2/14/23, 6:47 PM

I believe it could work on my PC or is it too slow?

Kruno•2/14/23, 6:48 PM

Tesli23•2/14/23, 6:49 PM

I dont think you have enough vram

Kruno•2/14/23, 6:58 PM

TTesli23 I dont think you have enough vram

Kruno•2/14/23, 6:58 PM

How much would I need?

KKruno How much would I need?

cangundogan•2/14/23, 7:47 PM

I think it doesnt take the second 4GB vram you have into account. I really dont know how to solve it but would suggest using google colab with your google drive instead. It works a lot faster then it would on 970s and it is free for the most part. Like even if you could get it to work on your computer, training new models or textual inversion embeddings would take so long, and inference is already a lot faster on the free version of colab. There are a couple of videos on it on Gozukara's channel.

KKruno How much would I need?

Tesli23•2/14/23, 7:57 PM

At least 8 but you may need 12GB to train

Ccangundogan I think it doesnt take the second 4GB vram you have into account. I really dont ...

Kruno•2/14/23, 8:25 PM

Appreciate the response. Will learn how to do that. Just jumped on this video about it https://www.youtube.com/watch?v=mnCY8uM7E50

YouTubeSoftware Engineering Courses - SE Courses

Transform Your Selfie into a Stunning AI Avatar with Stable Diffusi...

Our Discord : https://discord.gg/HbqgGaZVmr. How to do free Stable Diffusion DreamBooth training on Google Colab for free.
If I have been of assistance to you and you would like to show your support for my work, please consider becoming a patron on

https://www.patreon.com/SECourses

Stable Diffusion Playlist: https://www.youtube.com/playlist?l...

Furkan Gözükara SECourses•2/15/23, 8:23 PM

büt tarihleri 20-24 şubat tahmini

FFurkan Gözükara SECourses büt tarihleri 20-24 şubat tahmini

Mohamad Jarad•2/15/23, 8:25 PM

Is the software eng. department included in this date as well?

MMohamad Jarad Is the software eng. department included in this date as well?

Furkan Gözükara SECourses•2/15/23, 8:26 PM

yes

Ari_•2/16/23, 9:14 AM

Hello, could someone please help with this error? I'm trying to train on a different model to SD1.5 and get the below error

Furkan Gözükara SECourses•2/16/23, 11:16 AM

@everyone

can you compare these 2 sounds and tell me is enhanced is better than original or not? this is a speech from my older bad quality recording. 5 minutes speech

herkes bakıp hangisi daha iyi yorum yapabilir mi? 5 dakikalık bir konuşma

original : https://sndup.net/kj9n/

enhanced : https://sndup.net/hyvq/

LeHeL•2/16/23, 11:18 AM

enhanced is much more clear to understand it (in my opinion).

Darkestry•2/16/23, 11:29 AM

Enhanced is like 10 times better

Furkan Gözükara SECourses•2/16/23, 11:30 AM

thank you so much for feedback @LeHeL @Darkestry . also sorry for tagging everyone but really need opinions

Marcelo•2/16/23, 11:38 AM

The enhanced one, clearer and normalized

Mohamad Jarad•2/16/23, 12:25 PM

Hello Dr @Furkan Gözükara SECourses
Since you are the Danışman of us, I would like to ask about the courses that we have to select, system allowed to select only 3 of 4 elective courses, Is there some way we can choose 4 out of 4 courses ?

MMohamad Jarad Hello Dr <@205854764540362752> Since you are the Danışman of us, I would like t...

Furkan Gözükara SECourses•2/16/23, 1:05 PM

can you show me screenshot of what have you selected and what you cant select? actually if you email Özer hoca he knows best

Furkan Gözükara SECourses•2/16/23, 1:05 PM

Özer TANRIVERDİ <ozer.tanriverdi@toros.edu.tr>

FFurkan Gözükara SECourses can you show me screenshot of what have you selected and what you cant select? a...

Mohamad Jarad•2/16/23, 1:08 PM

Here are the elective courses

FFurkan Gözükara SECourses Özer TANRIVERDİ <ozer.tanriverdi@toros.edu.tr>

Mohamad Jarad•2/16/23, 1:09 PM

Ok thank you Dr

Kavendish•2/19/23, 9:14 PM

When I try to generate class images, I get this error. plz help

LeXωDeX•2/23/23, 1:58 AM

Is there a fault with the latest Dreambooth software version?
Running with the same parameters and the same material, the latest software version does not train the correct results.

LeXωDeX•2/23/23, 2:01 AM

With 70 images of the same type, personal wizard or object/style wizard neither could be trained.after entering the promp\t are irrelevant pictures, while before 30 pictures can get good results.

LLeXωDeX Is there a fault with the latest Dreambooth software version? Running with the s...

LeXωDeX•2/24/23, 5:06 AM

After I kept testing, I found that it was the version of xformers that was the problem. I had updated the version of xformers before and now I had to roll back the version to get it to work properly.

LeXωDeX•2/24/23, 5:06 AM

problem version is 0.0.16 ,don't upgrade this one