TMC 'extruder' reports error: GSTAT: 00000001 reset=1(Reset)
Hi All,
On my V-Minion with SKR2 ....
I'm seeing this error sometimes.
"TMC 'extruder' reports error: GSTAT: 00000001 reset=1(Reset)"
Sometimes it happens on layer 5, somtimes 30% into the print.
It doesn't happen on ALL the prints.. I hate to draw conclusions but it seems like when the Y axis moves a lot it happens.
So now, I tried the default slow profile that comes with SS for the minoin at it works! Same model.
Now when I add a little bit of accel's nothing crazy like 6000 it bombs out again for that error.
I swapper the drivers for the Z and extruder. I swapped usb cables.
It puzzles me that it only happens on some models and not others, and also that it doesn't do it on the slow speed settings but only on the faster profiles.
Does anyone have an idea?
5 Replies
BTDT.... it's power spikes. Same here..swapped drivers and all is well.
Dig back through your klipper.log files.... i'll bet you'll see a bunch of GSTAT 0001 errors. When klipper sees it's third error for the same driver it crashes the print.
sloow down you acceleration which will minimize the power surges that are making your power supply fluctuate. when the driver sees very small reference changes it kicks GSTAT errors.
adverse-sapphire•2y ago
New drivers eh? Did you get the same ones or newer/better?
first round I simply bought a couple spare real BTT TMC2209s. Just last week I swapped XY drivers to TMS5160 Pro's and added a 48V supply to the mix.
first four prints now, not a single GSTAT in my logs.
adverse-sapphire•2y ago
Ah OK I don't thinky skr2 will support 48v
equal-aqua•2y ago
I had this too.
First changed cable and Driver. At the end In changed the Motor, which fixed it.