4. Does the VPforce controller do 30 amps total or per motor, and does it take the amps straight fro
- Does the VPforce controller do 30 amps total or per motor, and does it take the amps straight from the psu (so also limited by the psu maximum)?
WIt's per motor, total current drawn from PSU will vary depending on input voltage. But it's about 100-120W per motor at maximum.
KDoes anybody here currenty have the "VPC Flightstick Z-Extension" attatched?
KTo the Rhino (or virpil base)
LWhy are you asking?
KI got the answer I was looking for by another friend that has it
Kwondered how far down it went at max pull
KAnyone know the resolution of the Rhino?
F
KThank you. I didn't think to search. I should have went to bed hours ago and I'm neck deep in to Rhino videos, measuring how it will fit my rig and all 
K12 bit is good, just as good as what I have now
HHas anyone tried the rhino with Condor 2 at all?
Also what's the method to get this working on msfs...
Also what's the method to get this working on msfs...
MHaven’t flown condor in ages but already know rhino works fine with it cause it uses standard directinput just like normal store bought ff sticks.
P!stats
VHey @xupicor,
So the last Shipped RHINO is #0059 on 2023-03-02
Average waiting time from preorder to shipped is 140 days, median is 177 days, max is 209 days
56 Rhinos are shipped in total
So the last Shipped RHINO is #0059 on 2023-03-02
Average waiting time from preorder to shipped is 140 days, median is 177 days, max is 209 days
56 Rhinos are shipped in total
PNot sure about Condor 2 but for MSFS2020 I just use XPForce software it works well enough, until Walmis makes a msfs telem app like the dcs one 
. Trim moves the stick you get AoA & stall buffeting & other general effects.
. Trim moves the stick you get AoA & stall buffeting & other general effects.
MMy MSFFII works without XPForce quite well in Condor and Condor2, they've always had great native FF implementation. Never hooked anything to the rudder axis but there's a checkbox for it in the menu. Now if only they weren't such curmudgeons about supporting VR and didn't disable AA in the graphics >_>
If anyone is on the fence about XPForce for MSFS it also works quite well.. like good enough I forget that extra layer is even there since you start the sim by launching that app.
If anyone is on the fence about XPForce for MSFS it also works quite well.. like good enough I forget that extra layer is even there since you start the sim by launching that app.
DI must be the only one that doesn’t like xpforce in msfs2020 with the rhino. Some of the effects are fine, but if I pitch up, I get large forces pitching me up even more. Same for pitching down. I tried lowering some of the settings but it didn’t fix things. These forces aren’t realistic imo. As for condor 2 and DCS, I love the native ffb support and everything works great without xpforce or any other 3rd party software.
WYou can tweak those forces using "Constant Force" slider in VPforce.
Those forces simulate moving the control surfaces into the air stream, so if you have high AoA, your pitch neutral force would be somewhat back. XPforce tries to simulate that, but the strength of that effect might be off.
Those forces simulate moving the control surfaces into the air stream, so if you have high AoA, your pitch neutral force would be somewhat back. XPforce tries to simulate that, but the strength of that effect might be off.
F@pinksht how did you configure msfs2020 and xpforce to get the trum to move your stick? If I use alternate trim, the stick moves in opposite direction of the trim but only in the sim. The rhino doesn't move
Mhi, will the xpforce work with MSFS2020? does it required a midware?
A2020 doesn't have native ffb support, for example the abovementioned xpforce should do the trick
PThe VPforce RHINO FFB Base will work with the 3rd party software XPForce for MSFS2020 to give ffb effects.
PHey m8, sorry I was doing an ARMA 3 Op. I don't think I really had to change any settings for xpforce to work the trim properly. I'll try jump on tomorrow & see
DHi. Anyone with a DoF reality platform in here? I wonder if you were able to mount the base to the unit
AJust looking at the thing I'd say depends on how much tinkering you're willing to do
Athe structure seems easily solid enough and building a mounting for that shouldn't be too hard if you have the tools to do it
SWhen I go to the xpforce web page at
S
Smy antivirus is having an anxiety attack with this displayed:
SThreat found
This web page may contain dangerous content that can provide remote access to an infected device, leak sensitive data from the device or harm the targeted device.
Threat: HTML/ScrInject.B trojan
Access to the web page has been blocked. Your computer is safe.
This web page may contain dangerous content that can provide remote access to an infected device, leak sensitive data from the device or harm the targeted device.
Threat: HTML/ScrInject.B trojan
Access to the web page has been blocked. Your computer is safe.
SHas anyone tried this:
SGitHub
Contribute to joeyjojojunior/simFFB development by creating an account on GitHub.
AOf course I can't guarantee anything, but false positives are a thing
Dthat's the thing, I only have some basic tools and would def prefer a ready-made mounting solution
FYes. Look at my posts for pics
V:package: 
RHINO #0061 Has Shipped!
RHINO #0061 Has Shipped!
GHi, I checked the faq. But still have some questions. How long is the wait list if i buy it now. What i need to buy to have a ready to go cyclic? The ffb kit + rhino base?
GI still need to buy a cyclic grip for myself? And how the buttons will work.
GI already have a mssidewinderffb with a extension mod but not with the resistor mod.
PHey m8, The RHINO Base is a ready to go force feedback base & has a wait list atm, the motor kits are available to be posted out within a few days, the motor's in the kits are specially selected by Walmis to work as FFB along with his USB PCB. The base will work out of the box with Thrustmaster & Virpil grips Walmis has adapters for Winwing & VKB grips, the base is compatible with extensions but it is not as necessary as other bases due to the RHINO having a massive throw length.
GThanks for the info.
GOmg lol
GThe extension would be more about the ergonomics.
GSo the motor kits are kinda ready to ship, but i will need the rhino base that has a waiting list. How long do you think is the waiting list?
WYeah basically you have two routes: you can get a motor kit and DIY the mechanics/gimbal/etc. or wait for the finished RHINO base. The wait list is pretty long, could be a year of wait.
GI would like the rhino base. But with a year long wait i will see what i can do. There is some tutorials available? Im familiar with diy servo motors.
Ddoes anyone know maybe walmis? but I just want dampening at the endstops.. like from 90%-100% of the +X and -X
DI don't want dampening between -X(0-90%)/+X(0-90%)
Djust to slow down the endstops bounce
Wset the endstop power to 0%, then only dampening should remain