Yep Pawel! I got it from him on his simplesimpit page along with the chair. Initially I was hoping t

Yep Pawel! I got it from him on his simplesimpit page along with the chair. Initially I was hoping to add one of Walmis' kits to it, I couldn't see it really fitting. Maybe one day!

SStoned Kakapo Yep Pawel! I got it from him on his simplesimpit page along with the chair. Init...

GarrafaBr•3/23/23, 4:18 PM

I have ordered mine last week from Pawel too when I noticed the backorder and price of the monster tech chair. Also hoping for one day having the Mig stick integration with the Rhino.

Jon (Bounty_V)•3/23/23, 4:23 PM

https://tenor.com/view/star-wars-chancellor-dark-side-plan-evil-jedi-gif-7689991

Tenor

GGarrafaBr I have ordered mine last week from Pawel too when I noticed the backorder and pr...

Stoned KakapoOP•3/23/23, 4:55 PM

I'm honestly still loving the chair! Especially at the price point. Very configurable, just need to get nuts and bolts. I may modify it at some point and use the steal frames to make an SJU-4, now that I have room for a full blown cockpit

GGarrafaBr I have ordered mine last week from Pawel too when I noticed the backorder and pr...

FlatSpin•3/23/23, 5:38 PM

what chair? Link?

FFlatSpin what chair? Link?

GarrafaBr•3/23/23, 6:07 PM

SIMple SIMpit, please google it, the first link takes you to his Facebook page. There you have his e-mail. I contacted him through it. He answered almost imediately. There are also some pictures of the Chair, stick, etc. on the Facebook page.I got to know about it thanks to RS ddrake1984 increadible discord Server. I am afraid to post a link here without asking Walmis.

GGarrafaBr SIMple SIMpit, please google it, the first link takes you to his Facebook page. ...

walmis•3/23/23, 6:44 PM

No worries

FFlatSpin what chair? Link?

GarrafaBr•3/23/23, 7:07 PM

https://www.google.com/url?sa=t&source=web&rct=j&url=https://m.facebook.com/SIMpleSIMpit/&ved=2ahUKEwjQhs7-0PL9AhVOS_EDHcbdDNwQFnoECBIQAQ&usg=AOvVaw3hxbA0Nkp8w8EonWjwYybi

FFlatSpin what chair? Link?

GarrafaBr•3/23/23, 7:12 PM

https://discord.com/invite/szqaJE7

FlatSpin•3/23/23, 7:26 PM

Got it, thanks.

ddrake1984•3/23/23, 8:53 PM

He was also looking at making an apache collective

ddrake1984•3/24/23, 6:43 AM

This just arrived

ddrake1984•3/24/23, 6:43 AM

Excited!!!

Ye Old Grog•3/24/23, 7:58 AM

Noice

Dddrake1984 This just arrived

Jaeger•3/24/23, 8:46 AM

Another toy which, after using it the first time, there is no way back.

Polack-1•3/24/23, 9:56 AM

yep, PointCTRL is great

Dddrake1984 This just arrived

Knight59•3/24/23, 4:32 PM

Game changer!

GGarrafaBr I have ordered mine last week from Pawel too when I noticed the backorder and pr...

Mike (Mugs)•3/24/23, 8:16 PM

Have also put an order in

PiNKSH!T•3/25/23, 4:27 AM

@walmis can you block this guy

FlatSpin•3/25/23, 4:30 AM

Second that

PiNKSH!T•3/25/23, 4:41 AM

A motion as been proposed

PiNKSH!T•3/25/23, 4:41 AM

the motion has been heard, any others wish to speak on the matter?

PiNKSH!T•3/25/23, 4:42 AM

No? decision is made please block user at your discretion

walmis•3/25/23, 6:22 AM

Done, friggin spammers

Viktor Martin•3/25/23, 10:13 AM

https://tenor.com/view/antman-what-the-hell-happened-here-avengers-gif-18240147

Tenor

VViktor Martin https://tenor.com/view/antman-what-the-hell-happened-here-avengers-gif-18240147

mechsicko•3/25/23, 3:37 PM

Some cryptoscammer started spamming the channel with their garbage

AndyHill•3/25/23, 4:09 PM

Did it work?

AndyHill•3/25/23, 4:10 PM

If I start spamming my bank account number, would you be inclined to deposit random amounts of money?

FlatSpin•3/25/23, 4:13 PM

nein

Viktor Martin•3/25/23, 5:27 PM

Ah.

Jon (Bounty_V)•3/25/23, 11:47 PM

speaking of point ctrl

https://youtu.be/EeFl1DYuaDQ easily coolest thing ive seen (i think only relation is pointctrl dev is in the vid)

YouTubeflight enthusiast

DCS World Huey UH1H with DIY miniguns and PointCtrl Developer as pilot

Eagle dynamics is awesome for allowing proper VR support and joystick
support for the DCS Huey UH-1H helicopter module.

I am joined by Beestoopid and Shortbus (PointCtrl developer) doing a test flight with miniguns using two DIY made minigun controllers

I look forward to more crew served aircraft, like the upcoming Hind Mi-24..
hoping there ...

Polack-1•3/26/23, 1:57 AM

Yeah, I remember that video. Positively fricken cool.

recoilfx•3/26/23, 2:23 PM

Does any one know what the AUX-SW header does on the board? Extra buttons?

Rrecoilfx Does any one know what the AUX-SW header does on the board? Extra buttons?

walmis•3/26/23, 4:16 PM

It's for extra inputs, but it's currently no-op.

Wwalmis It's for extra inputs, but it's currently no-op.

mechsicko•3/26/23, 7:36 PM

I've been thinking of using one of those Alps 7-way 'funky switch' things on a grip.. is the spi interface on the board able to handle encoder pulses? If not would that be difficult to add in the future?

Mmechsicko I've been thinking of using one of those Alps 7-way 'funky switch' things on a g...

walmis•3/26/23, 7:37 PM

It's implemented for the VPC Alpha, so it's doable via the shift register too

Wwalmis It's implemented for the VPC Alpha, so it's doable via the shift register too

mechsicko•3/26/23, 7:41 PM

Nice! Those make for a decent 5-way even without but being able to use the encoder too would be pretty cool in some planes.

Will3D•3/26/23, 10:00 PM

Hi, can anyone check my pulley design ? I've gone over it a couple times and can't see any issue. But it seems the teeth are just a little too close, as the belt only fits in for about 2/3rds the way around and then doesn't match. I followed the instructions here. https://capolight.wordpress.com/2018/06/16/full-guide-to-creating-a-htd-timing-pulley-in-cad-fusion-360/

Capolight Electronics Projects.Richard

Full guide to creating a HTD timing pulley in CAD (Fusion 360)

2020 Update: It has been pointed out by a comment (thanks Ivanov) that the tooth profile described here, while looking close, is not within spec for a HTD timing pulley. While its probably fine for…

Will3D•3/26/23, 10:01 PM

Pulley is 80T, drawn in Fusion360.

Will3D•3/26/23, 10:02 PM

FlatSpin•3/26/23, 10:37 PM

Did anyone else lose access to the support channel?

FFlatSpin Did anyone else lose access to the support channel?

TheAmazinGreat•3/26/23, 10:47 PM

I did, it says "Messages Failed to Load" for me.

FlatSpin•3/26/23, 10:51 PM

yep, same for me.

roller25.•3/26/23, 11:09 PM

Same

miki•3/27/23, 1:26 AM

There was a problem for me before, but it works now

WWill3D Hi, can anyone check my pulley design ? I've gone over it a couple times and can...

mechsicko•3/27/23, 4:44 AM

If you want I can generate a new pulley in scad and pull it into fusion to convert it to a solid. The parametric scad thing does really well with the teeth. I generated GT tooth type pulleys for mine but HTD is one of the tooth options as well.

Mmechsicko If you want I can generate a new pulley in scad and pull it into fusion to conve...

Will3D•3/27/23, 4:46 AM

Cool. Ok thanks that would be great. I’m really not sure why mine isn’t right. It’s very close and I used the numbers in the spreadsheet!

WWill3D Cool. Ok thanks that would be great. I’m really not sure why mine isn’t right. I...

mechsicko•3/27/23, 4:48 AM

Besides being 80t HTD what are the rest of the specs or maybe send me the file? I can match your hub type or whatever or just make the model so you can finish it off in Fusion. 5mm pitch I assume? How wide?

Mmechsicko Besides being 80t HTD what are the rest of the specs or maybe send me the file? ...

Will3D•3/27/23, 4:55 AM

I posted the file above. But I’d be happy with just the blank pulley. I can do the rest.

Will3D•3/27/23, 4:55 AM

It’s htd 5. Btw.

mechsicko•3/27/23, 6:50 AM

pm'd the pulley

Yep Pawel! I got it from him on his simplesimpit page along with the chair. Initially I was hoping t

Similar Threads