If you want I can generate a new pulley in scad and pull it into fusion to convert it to a solid. Th

If you want I can generate a new pulley in scad and pull it into fusion to convert it to a solid. The parametric scad thing does really well with the teeth. I generated GT tooth type pulleys for mine but HTD is one of the tooth options as well.

Mmechsicko If you want I can generate a new pulley in scad and pull it into fusion to conve...

Will3D•3/27/23, 4:46 AM

Cool. Ok thanks that would be great. I’m really not sure why mine isn’t right. It’s very close and I used the numbers in the spreadsheet!

WWill3D Cool. Ok thanks that would be great. I’m really not sure why mine isn’t right. I...

mechsickoOP•3/27/23, 4:48 AM

Besides being 80t HTD what are the rest of the specs or maybe send me the file? I can match your hub type or whatever or just make the model so you can finish it off in Fusion. 5mm pitch I assume? How wide?

Mmechsicko Besides being 80t HTD what are the rest of the specs or maybe send me the file? ...

Will3D•3/27/23, 4:55 AM

I posted the file above. But I’d be happy with just the blank pulley. I can do the rest.

Will3D•3/27/23, 4:55 AM

It’s htd 5. Btw.

mechsickoOP•3/27/23, 6:50 AM

pm'd the pulley

Mmechsicko pm'd the pulley

Will3D•3/27/23, 9:01 AM

Thank you!

VPforceBot•3/27/23, 11:53 AM

:package:

RHINO #0067 Has Shipped!

VPforceBot•3/27/23, 12:12 PM

:package:

RHINO #0065 Has Shipped!

Viktor Martin•3/27/23, 2:15 PM

Dddrake1984 This just arrived

Deleted User•3/27/23, 6:11 PM

PointCTRL is great, but damn I want something that can recognize depth and give me hands, like Ultraleap, but just developed better and not so buggy... I dont think its that hard to do, there is just no market

Deleted User•3/27/23, 6:11 PM

ultraleap had 10 years and its still not flawless

WWill3D Hi, can anyone check my pulley design ? I've gone over it a couple times and can...

mechsickoOP•3/27/23, 8:17 PM

2 things that occurred to me that could be an issue.. one is if your printer is calibrated (like if a 20mm cube measures 20.00mm or not) the other is rounding errors from digital interpolation.

Mmechsicko 2 things that occurred to me that could be an issue.. one is if your printer is ...

Will3D•3/27/23, 8:19 PM

I had certainly thought about printer error, but I recently printed a sleeve to go over 2020 extrusion at 20.1x20.1mm and it fit like a glove. This seems like a larger error.

Will3D•3/27/23, 8:19 PM

I'm printing yours now.

DDeleted User PointCTRL is great, but damn I want something that can recognize depth and give ...

TheZoq2•3/27/23, 10:10 PM

I made something like that for steamVR using vive trackers. I could send a link if you remind me in a few hours

TheZoq2•3/27/23, 10:11 PM

(It's janky and the code only works on linux, but perhaps someone can steal some ideas

Polack-1•3/28/23, 12:14 AM

got #64 today. Working just fine, I didn't have much time to tinker with it - but actually being able to use trim on the Huey and the Hind is pretty cool!

Polack-1•3/28/23, 12:15 AM

packaged very well, worked out of the box with no problems. Also stick stiffening in Fw190 was nice to see, well, feel!

Polack-1•3/28/23, 12:18 AM

I won't have the time till weekend to really sink my teeth into it - and vpforce config, but I love it. Also - it's so god damned smooth!

Polack-1•3/28/23, 12:18 AM

and the spring feeling can give a good deal of force

Polack-1•3/28/23, 12:19 AM

I see the power supply is 9.5A and the default psu current was set at 7A in the software, there shouldn't be any issue with setting it at 9A - apart from reaching higher temps faster if I hold it against max force?

PiNKSH!T•3/28/23, 12:21 AM

From what I was told, don't touch any of the settings in Expert Settings or Input Filtering

PiNKSH!T•3/28/23, 12:23 AM

I've never even set my master gain to 100% yet, I've left it on 90% & with 100% spring & some other settings warbirds feel really good, never going to need two hands to pull back in a turn but still a lot more stiff & alive feeling than my VKB GF3 base

Polack-1•3/28/23, 12:26 AM

oh it's alive for sure, I've gone vertical in a Fw190 and entered a a lively and... let's call it - acrobatic - spin. The stick was very much alive for a while, until I regained control and got into a dive to recover.

PiNKSH!T•3/28/23, 12:26 AM

IL2 or DCS?

Polack-1•3/28/23, 12:26 AM

DCS

PiNKSH!T•3/28/23, 12:28 AM

ahh nice, I don't have any warbirds for DCS yet, IL2 has been my go to for that. Planning on getting at least a warbird for axis & allied, maybe one from each country eventually

PPolack-1 DCS

PiNKSH!T•3/28/23, 12:28 AM

are you using the Telem app from Walmis?

Polack-1•3/28/23, 12:29 AM

I just got the Rhino this evening, so most of the time I was disassembling, fitting and reassembling the simpit. I say simpit, it's not that impressive, but I still had to disassemble the diy seat to fit the damn thing

Polack-1•3/28/23, 12:29 AM

so just the vpforce ffb configurator

Polack-1•3/28/23, 12:29 AM

need to get the telem app too

PiNKSH!T•3/28/23, 12:30 AM

Do you fly modern aircraft in dcs too? What about heli's?

Polack-1•3/28/23, 12:30 AM

I have all the modules in DCS, just not enough time to fly them all regularly

Polack-1•3/28/23, 12:31 AM

but I do fly helicopters, yes. Huey is a favourite, Mi8 is a my first love though. I crashed so many of them I should have gotten a medal from Zelensky by now

PiNKSH!T•3/28/23, 12:31 AM

nice, yeah my m8 grabbed almost all of them on a sale a year or so back, got like 50% or more off the price, pretty good buy really

Polack-1•3/28/23, 12:32 AM

the Hind is fun to fly, Apache can be annoying but is manageable

Polack-1•3/28/23, 12:32 AM

I can very reliably crash on take off in the gazelle. The only module I bounced off of

Polack-1•3/28/23, 12:32 AM

I mean, I even fly yak52 just for sightseeing

Polack-1•3/28/23, 12:33 AM

and try to put some time into warbirds from time to time

PiNKSH!T•3/28/23, 12:33 AM

Heli's is were the Rhino shines too, force trim actually working in them is so much better, hard to explain how much better it is until you use it

Polack-1•3/28/23, 12:33 AM

yep, flown the Huey and quite a bit with a Hind

Polack-1•3/28/23, 12:34 AM

so far I've managed to fly the copters without trimming because I hated the mechanics of it in a non-ffb stick

PPolack-1 I can very reliably crash on take off in the gazelle. The only module I bounced ...

PiNKSH!T•3/28/23, 12:34 AM

yeah it's a pitty about that module, I really wanted it but I've heard mnegative things about the FM on it

Polack-1•3/28/23, 12:34 AM

now, though... NOW I can trim just fine

Polack-1•3/28/23, 12:34 AM

now I'm going to use it, lol. Because now it feels right

PPolack-1 so far I've managed to fly the copters without trimming because I hated the mech...

PiNKSH!T•3/28/23, 12:35 AM

it's so much better with ffb, just make sure you change the special settings to default

PiNKSH!T•3/28/23, 12:35 AM

for the force trim special setting

Polack-1•3/28/23, 12:35 AM

already did for all of the relevant modules, first thing ;)|

Polack-1•3/28/23, 12:36 AM

alright, I need to go to bed, it's way, waaay past the time I should be already ZzzzZz-ing

Polack-1•3/28/23, 12:37 AM

Now I have to go through all the modules, so of course I'll share my findings

If you want I can generate a new pulley in scad and pull it into fusion to convert it to a solid. Th

Similar Threads