You’ll probably have to go into G-code to do it. I had to with my little Monoprice Mini. Either dire

You’ll probably have to go into G-code to do it. I had to with my little Monoprice Mini. Either direct USB injection or a lump of G-Code on an SD card to run.

Warwolf09•3/30/23, 11:52 PM

!status

WWarwolf09 !status

VPforceBot•3/30/23, 11:52 PM

Hey @warwolf09,
So the last Shipped RHINO is #0070 on 2023-03-29
Average waiting time from preorder to shipped is 147 days, median is 182 days, max is 214 days
70 Rhinos are shipped in total

RRustBelt You’ll probably have to go into G-code to do it. I had to with my little Monopri...

Will3D•3/31/23, 12:03 AM

Flashforge use proprietary code. So can’t do that.

inpayne•3/31/23, 12:58 AM

Does the a4 have any ffb capabilities?

Jon (Bounty_V)•3/31/23, 1:26 AM

if it did it would be the best community mod ever (not that it wasnt already but you know what i mean)

WWill3D Flashforge use proprietary code. So can’t do that.

RustBeltOP•3/31/23, 1:51 AM

https://github.com/markwal/GPX

GitHub

GitHub - markwal/GPX: Gcode to x3g conversion post processor

Gcode to x3g conversion post processor. Contribute to markwal/GPX development by creating an account on GitHub.

RustBeltOP•3/31/23, 1:52 AM

It’s not quite Proprietary, just a binary condensation of G-code.

JJon (Bounty_V)if it did it would be the best community mod ever (not that it wasnt already but...

inpayne•3/31/23, 4:32 AM

Just curious. I’m #76 so waiting patiently I should have my hands on one to try soon

Jon (Bounty_V)•3/31/23, 4:33 AM

yeah ive no clue if it does or not, would be amazing if so

inpayne•3/31/23, 4:33 AM

Also I’m sure I will figure it out soon enough. But do different airframes have different base setting profiles? How does that work…

Jon (Bounty_V)•3/31/23, 4:34 AM

i assume itd b based on what devs put

Jon (Bounty_V)•3/31/23, 4:34 AM

if ur talking dcs modules at least

inpayne•3/31/23, 4:34 AM

Yeah

Jon (Bounty_V)•3/31/23, 4:34 AM

im #98 so not too far behind

inpayne•3/31/23, 4:34 AM

I’ll download the software but been out of town for a couple weeks and will continue to be for another week or so. So was just curious while I’m on the road and can’t do anything anyway

JJon (Bounty_V)im #98 so not too far behind

inpayne•3/31/23, 4:35 AM

Nice just paid for mine with 6 to go it looks like. Hopefully it won’t take long. But no rush.

Jon (Bounty_V)•3/31/23, 4:35 AM

as i understand it best dcs modules are f14 and mirage f1

Jon (Bounty_V)•3/31/23, 4:35 AM

in regards to dev implemented ffb

inpayne•3/31/23, 4:36 AM

I’m most excited for the f14, warbirds and helicopters.

inpayne•3/31/23, 4:36 AM

And the easy switch between them. I hope… ha

Jon (Bounty_V)•3/31/23, 4:39 AM

once i have mine ill begin adding flight sim gear to my new racing rig

Jon (Bounty_V)•3/31/23, 4:39 AM

gonna try center mounting the rhino

inpayne•3/31/23, 4:41 AM

Nice. I currently have a cm3 with long extention on a center desk mount. I’ll probably have to use a shorter extension or not one at all with the vp I’m guessing.

Jon (Bounty_V)•3/31/23, 4:42 AM

its basically as tall as a virpil stick

RRustBelt https://github.com/markwal/GPX

mechsicko•3/31/23, 4:42 AM

Unless I'm missing something that is about the gcode it uses to slice/print from, x3g. The gcode you adjust for pid tuning is in the printer's firmware, which I gather is some variant of Sailfish on Flashforge machines. That's where the adjustments to steps/mm are made, not the slicer. Can a Flashforge printer hook up to a computer via USB? If so can't one just use Pronterface or Octoprint to access Sailfish to tweak pid like any other printer's firmware?

JJon (Bounty_V)its basically as tall as a virpil stick

inpayne•3/31/23, 4:42 AM

The vp base?

Jon (Bounty_V)•3/31/23, 4:42 AM

the rhino base yeah

Jon (Bounty_V)•3/31/23, 4:43 AM

maybe slightly taller?

Jon (Bounty_V)•3/31/23, 4:44 AM

I'll probably grab a vkb ultimate grip then get both a 100mm and 200mm extension at the same time, surely one of em will do the trick

inpayne•3/31/23, 4:47 AM

I seen it next to a cm3 and it seemed considerably taller, and with the cm3 and 200mm extension it’s on the border of too tall already my chair won’t go up any higher. Next house I’m building a proper sim pit

inpayne•3/31/23, 4:50 AM

It’s too bad razbam don’t have any ffb, because they are so great otherwise

Jon (Bounty_V)•3/31/23, 4:50 AM

yeah it sounded like they dont have a clue how to implement it

Magpie•3/31/23, 4:51 AM

I had to cut a whole in the Sim pit floor to make it work with a 200mm extension

Magpie•3/31/23, 4:51 AM

Worth it in the mozzie

Jon (Bounty_V)•3/31/23, 4:52 AM

my t slot rig is on wheels so it is 7.62cm off the ground

Jon (Bounty_V)•3/31/23, 4:54 AM

ill add more frame attached to the bottom of the frame and ill mount the rhino to that

JJon (Bounty_V)yeah it sounded like they dont have a clue how to implement it

PiNKSH!T•3/31/23, 4:55 AM

I asked in their discord what ffb effects the f15e will come with, they didn't even know if it was fbw or not, then suggested I should do the research for them & report it back, f**king dipshits tbh. Luckily we have Walmis & his awesome DCS Telem app for the Rhino.

Jon (Bounty_V)•3/31/23, 4:56 AM

but its the year of the eagle

Jon (Bounty_V)•3/31/23, 4:56 AM

how tf do you make a module and not know if it is fbw or not

Jon (Bounty_V)•3/31/23, 4:57 AM

i still dont own any razbam modules and im thinking that streak may continue for the foreseeable future

Jon (Bounty_V)•3/31/23, 4:57 AM

Speaking of ffb effects, C130 devs sounded willing to implement em, but not unless they had actual ffb to test em with and it also didnt sound like they wanted to actually buy ffb themselves

Jon (Bounty_V)•3/31/23, 4:58 AM

i was effectively gaslit off their discord server or id regularly pester them about it

JJon (Bounty_V)how tf do you make a module and not know if it is fbw or not

PiNKSH!T•3/31/23, 4:58 AM

cause you only care about doing it for the money & could give two shits about anything else, I guarantee if FFB sticks were still a main stream thing they would care then cause it could affect on their $$, but if it's only a small group of ppl that use ffb, well then f*ck us I guess

Jon (Bounty_V)•3/31/23, 4:59 AM

Next module likely to have some sort of ffb will be the F4U or F4E

JJon (Bounty_V)Next module likely to have some sort of ffb will be the F4U or F4E

PiNKSH!T•3/31/23, 5:00 AM

only if the ppl that made the f14 do it, so far it seems they're the only ones that care enough

Jon (Bounty_V)•3/31/23, 5:00 AM

I don't put much stock in Polychop adding it to OH58D after I've seen how their CEO treats people

Jon (Bounty_V)•3/31/23, 5:01 AM

Yeah I'm not sure employee wise if the people who worked on F14 FFB are also working on the F4

Jon (Bounty_V)•3/31/23, 5:01 AM

It is a bit vague who is working on what, with them having 3 announced projects in development

JJon (Bounty_V)I don't put much stock in Polychop adding it to OH58D after I've seen how their ...

PiNKSH!T•3/31/23, 5:01 AM

we're not ppl to shit heads like that, we just the plebs who slave away to save enough to buy their products

Jon (Bounty_V)•3/31/23, 5:02 AM

It always baffles me how someone can get the hierarchy of respect and common decency so wrong

You’ll probably have to go into G-code to do it. I had to with my little Monoprice Mini. Either dire

Similar Threads