No "DCS-wide" effects. Everything is up to the module author. Some modern jets have some effects oth

No "DCS-wide" effects. Everything is up to the module author. Some modern jets have some effects others have nothing. I don't expect there to be weapons effects while firing in any modern jet. I hear anything by Heatblur has a good FFB implementation (F-14, soon F-4).

SSundogZeus Seems to be related to VR. No issues with 2D. Still debugging. #

miki•4/4/23, 8:20 PM

I have same issues with some missions when I run MT version

LLeLv30_Superbus No "DCS-wide" effects. Everything is up to the module author. Some modern jets h...

SundogZeus•4/4/23, 8:33 PM

That’s what I figured. Thanks for that.

Mmiki I have same issues with some missions when I run MT version

SundogZeus•4/4/23, 8:34 PM

Ok. Good to know. It may have been a mod conflict.

SSundogZeus Next question is: I only get stick shake effects on WW2 aircraft. Are there supp...

walmis•4/5/23, 6:19 AM

TelemFFB is the answer to this lack of implemention from DCS side.

Wwalmis TelemFFB is the answer to this lack of implemention from DCS side. 🙂

Naudiz•4/5/23, 7:39 AM

Does TelemFFB respect individual modules? Or is it something you adjust yourself?

NNaudiz Does TelemFFB respect individual modules? Or is it something you adjust yourself...

walmis•4/5/23, 7:40 AM

It can be configured per aircraft

Wwalmis It can be configured per aircraft

Naudiz•4/5/23, 7:41 AM

Cool, cheers

NNaudiz Cool, cheers

ddrake1984•4/5/23, 8:03 AM

Well.. it can be, but there is no real instruction

Dddrake1984 Well.. it can be, but there is no real instruction

Naudiz•4/5/23, 8:18 AM

Does it come with presets per aircraft?

walmis•4/5/23, 8:22 AM

You can check it out, it's open source.
https://github.com/walmis/VPforce-TelemFFB
https://github.com/walmis/VPforce-TelemFFB/blob/master/config.ini

Merlins51•4/5/23, 7:14 PM

Is there any chance of an executable for TelemFFB? Have tried following the instructions to install it but can't get it to run.

MMerlins51 Is there any chance of an executable for TelemFFB? Have tried following the ins...

walmis•4/5/23, 7:19 PM

You can find it in the releases section: https://github.com/walmis/VPforce-TelemFFB/releases/tag/v0.1.3

Merlins51•4/5/23, 7:20 PM

You beautiful man!!

recoilfx•4/6/23, 2:12 PM

I am trying to figure out ways to have independent spring X and Y forces in DCS per aircraft. From my cursory reading of the code, so far TelemFFB have two man effects, periodic and constant, but no spring effect. Is it possible to get the spring effect implemented in the future?

walmis•4/6/23, 2:29 PM

Yeah, It will be available in the next push (with the MSFS stuff)

Wwalmis Yeah, It will be available in the next push (with the MSFS stuff)

recoilfx•4/6/23, 2:55 PM

https://tenor.com/view/animals-rhino-baby-dance-lol-gif-3520560

Tenor

dancing rhino

recoilfx•4/6/23, 2:55 PM

YAYYY!!!! Thank you Walmis!

Wwalmis TelemFFB is the answer to this lack of implemention from DCS side. 🙂

SundogZeus•4/6/23, 5:37 PM

Thank you. Can’t wait to try this out.

Magpie•4/7/23, 7:41 AM

Hey in the telem app what does the * mean in the config?

Magpie•4/7/23, 7:41 AM

[MiG-21.*]

walmis•4/7/23, 7:44 AM

It's a regular expression, matches any characters after 21 (I'm lazy to type every variant or figure out what goes after. Is it bis or Bis

)

Magpie•4/7/23, 7:49 AM

ah ok

Magpie•4/7/23, 8:12 AM

I finally played with the telem app
its great for helis but I need to do some work on the jets i guess

Magpie•4/7/23, 8:13 AM

I might change my gun feel to worward and back, its weird when it kicks at 45 degrees

Magpie•4/7/23, 8:13 AM

P51 felt good though!

Magpie•4/7/23, 8:13 AM

The rpm idea was inspired

Magpie•4/7/23, 8:29 AM

Does the buffetting ramp up?
I tried to change the f5 buffet value to 17 and the stall effect to 20 but i didnt really feel it till 25 degrees

Magpie•4/7/23, 8:29 AM

Also whats the difference between the buffet and stall effect?

walmis•4/7/23, 9:20 AM

buffeting_start is the AoA value when it starts playing the buffeting and it ramps up to peak value when it reaches stall AoA

walmis•4/7/23, 9:21 AM

It also depends on your Periodic effects slider, I've defaulted to 50% for the TelemFFB

Magpie•4/7/23, 9:31 AM

Ah brilliant, thankyou. Does it take data from say the F5 AOA meter (probably in units idk) or what degrees is actually at?

Magpie•4/7/23, 9:33 AM

Also I want to try to create the p effect for the harrier. It ramps up spring effect as you go faster. Is there a way to do this?

walmis•4/7/23, 9:36 AM

I've implemented spring for the next version of TelemFFB, so it will be possible then

walmis•4/7/23, 9:36 AM

AoA should be in degrees

Magpie•4/7/23, 9:41 AM

Ok thanks dude.

Magpie•4/7/23, 9:46 AM

Does the telemetry export what angle your stick is at?
I'm wondering if it's possible to put a 100 percent force endstop at like 80 percent of the pitch axis. This would allow the m2000 to have the feel of the elastic limit

Magpie•4/7/23, 10:04 AM

Sooo good, I worked out where to get the buffet give a light tenor to match the F5 cockpit shake.

The buffet should commence at different AoAs based on whether or not the flaps are out, but something is better than nothing

I like using .05 buffet value for sticks that have hydraulics with no feedback

Magpie•4/7/23, 10:08 AM

Is this the list of data that's exported?

Magpie•4/7/23, 10:10 AM

Damn this is siiick

Magpie•4/7/23, 10:11 AM

Spring effect based on speed will be so good for jets with a plumb bob like the f5

Magpie•4/7/23, 10:12 AM

I'm excited by this lol

Magpie•4/7/23, 10:30 AM

Fk yeah I can fly the mig 19 again without it feeling like it's on rails

Magpie•4/7/23, 10:48 AM

TypeError: float() argument must be a string or a number, not 'list'
Traceback (most recent call last):
File "main.py", line 193, in run
File "aircrafts.py", line 182, in on_telemetry
File "aircrafts.py", line 200, in _update_engine_rumble

I got this bug for engine rumble in the p47

MMagpie Does the telemetry export what angle your stick is at? I'm wondering if it's pos...

ddrake1984•4/7/23, 11:09 AM

I do something similar for f18

MMagpie TypeError: float() argument must be a string or a number, not 'list' Traceback (...

walmis•4/7/23, 11:47 AM

What values do you get in the telem windows? Can you screenshot it?

Troll 🇸🇪 🇳🇴•4/7/23, 4:33 PM

What powersupply should one use with the 86BLF04 motors?
I guess the USB board has a max power and voltage limit?

walmis•4/7/23, 4:55 PM

20-24V, 180-350W. Meanwell LRS-350-24 is good one for the price. The USB board only does the power distribution, the main power delivery is inbuilt inside the motors.

walmis•4/7/23, 4:55 PM

19-20V laptop PSUs work well too

LeLv30_SuperbusOP•4/7/23, 5:27 PM

How do I use Input loop back tool? Just start it and select my grip?

LeLv30_SuperbusOP•4/7/23, 5:28 PM

Is the "92" supposed to appear when I click the box and push the button in my grip?

No "DCS-wide" effects. Everything is up to the module author. Some modern jets have some effects oth

Similar Threads

Similar Threads

Similar Threads