Yeah, It will be available in the next push (with the MSFS stuff)
Yeah, It will be available in the next push (with the MSFS stuff)
RYAYYY!!!! Thank you Walmis!
SThank you. Can’t wait to try this out.
MHey in the telem app what does the * mean in the config?
M[MiG-21.*]
WIt's a regular expression, matches any characters after 21 (I'm lazy to type every variant or figure out what goes after. Is it bis or Bis 
)
)Mah ok
MI finally played with the telem app
its great for helis but I need to do some work on the jets i guess
its great for helis but I need to do some work on the jets i guess
MI might change my gun feel to worward and back, its weird when it kicks at 45 degrees
MP51 felt good though!
MThe rpm idea was inspired
MDoes the buffetting ramp up?
I tried to change the f5 buffet value to 17 and the stall effect to 20 but i didnt really feel it till 25 degrees
I tried to change the f5 buffet value to 17 and the stall effect to 20 but i didnt really feel it till 25 degrees
MAlso whats the difference between the buffet and stall effect?
Wbuffeting_start is the AoA value when it starts playing the buffeting and it ramps up to peak value when it reaches stall AoA
WIt also depends on your Periodic effects slider, I've defaulted to 50% for the TelemFFB
MAh brilliant, thankyou. Does it take data from say the F5 AOA meter (probably in units idk) or what degrees is actually at?
MAlso I want to try to create the p effect for the harrier. It ramps up spring effect as you go faster. Is there a way to do this?
WI've implemented spring for the next version of TelemFFB, so it will be possible then 
WAoA should be in degrees
MOk thanks dude.
MDoes the telemetry export what angle your stick is at?
I'm wondering if it's possible to put a 100 percent force endstop at like 80 percent of the pitch axis. This would allow the m2000 to have the feel of the elastic limit
I'm wondering if it's possible to put a 100 percent force endstop at like 80 percent of the pitch axis. This would allow the m2000 to have the feel of the elastic limit
MSooo good, I worked out where to get the buffet give a light tenor to match the F5 cockpit shake.
The buffet should commence at different AoAs based on whether or not the flaps are out, but something is better than nothing
I like using .05 buffet value for sticks that have hydraulics with no feedback
The buffet should commence at different AoAs based on whether or not the flaps are out, but something is better than nothing
I like using .05 buffet value for sticks that have hydraulics with no feedback
MIs this the list of data that's exported?
MDamn this is siiick
MSpring effect based on speed will be so good for jets with a plumb bob like the f5
MI'm excited by this lol
MFk yeah I can fly the mig 19 again without it feeling like it's on rails
MTypeError: float() argument must be a string or a number, not 'list'
Traceback (most recent call last):
File "main.py", line 193, in run
File "aircrafts.py", line 182, in on_telemetry
File "aircrafts.py", line 200, in _update_engine_rumble
I got this bug for engine rumble in the p47
Traceback (most recent call last):
File "main.py", line 193, in run
File "aircrafts.py", line 182, in on_telemetry
File "aircrafts.py", line 200, in _update_engine_rumble
I got this bug for engine rumble in the p47
DI do something similar for f18
WWhat values do you get in the telem windows? Can you screenshot it?
TWhat powersupply should one use with the 86BLF04 motors?
I guess the USB board has a max power and voltage limit?
I guess the USB board has a max power and voltage limit?
W20-24V, 180-350W. Meanwell LRS-350-24 is good one for the price. The USB board only does the power distribution, the main power delivery is inbuilt inside the motors.
W19-20V laptop PSUs work well too
LHow do I use Input loop back tool? Just start it and select my grip?
LIs the "92" supposed to appear when I click the box and push the button in my grip?
LI just found this 
Phey m8, looks like your onto it
Plooks like the consecutive numbers for a HAT swich
Palso you might need to check the 'Override Trim' box too, what sim you playing?
LAll good I just started up in a Huey and flipped that old "force trim" toggle switch I've always had in my pit but for the first time the stick came alive when I did! 
And both trim and trim reset now change the centre point as (I imagine) they'd do in a real one. 
And both trim and trim reset now LYeah I had to come back to correct something... what happens now when I hit trim: the stick DOESN*T move. The centering force just disappears. And it's amazing. 
SDoes anyone notice how far the F-14 default stick position is in DCS? I read that this is a function of the stick curvature of the real airplane that they modeled. I love all the other FFB features of this module, but I need to somehow make an adjustment for the Rhino default position. Any tips? Thanks
HYou can change the endstops of the axis so they bias forward if it bothers you
HIt's not a function of stick curvature, but rather a function of how the stick in a real aircraft works, with the stick "center" not actually being in the physical center of the pitch axis
HSince you don't need the same authority on pitch down as you do for pitch up
LI ran TelemFFB while trying the Huey. Am I correct that Huey doesn't have any translational lift effects yet? Can I just add my own lines to config.ini under these and try?
[UH-1H]
type=Helicopter
[UH-1H]
type=Helicopter
LYea you can
SThank you. Great explanation. I’ll experiment with the forward pitch stop.
MAny of this help?
HHi, I'm trying to get to work the rudder motor. The Rhino joystick is working fine. But I can't get the third motor to deliver some values. I startet the configuration twice and selected different id's, so one is for the joystick and one for the rudder motor. For the rudder motor i get values for cycle time, pot_1,pot_2, curr_x and temp_x. Curr_x is changing if I spin the motor axis but x and y deliver no values even when calibrating. The usb product Id is the same in both instances of the configuration. Any ideas what I could try?