Software Engineering Courses (SECourses)•3y ago

Thank you for your prompt response, I think I missed that one, will look into that and share the res

Thank you for your prompt response, I think I missed that one, will look into that and share the results later, thx once again

Sspectral_flux Thank you for your prompt response, I think I missed that one, will look into th...

Furkan Gözükara SECourses•4/28/23, 12:54 PM

yep this one newest. you are welcome

FFurkan Gözükara SECourses looks like txt file reading error

Isaac Brock•4/28/23, 1:03 PM

thanks, figured out which one was causing the issue

Zono50•4/28/23, 1:08 PM

i've noticed that when i do photo of ohwx , the of carries the most weight in daam. Also if i try to use one of my lora models with the epi_noiseoffset lora model, it doesn't even register on the heatmap for daam. Have you seen that before @Furkan Gözükara SECourses

ZZono50 i've noticed that when i do photo of ohwx , the of carries the most weight in da...

Furkan Gözükara SECourses•4/28/23, 1:09 PM

i dont think daam is able to utilize lora but not sure

Isaac Brock•4/28/23, 1:12 PM

ok im ready for something better than TI, which tutorial do you recommend?

Isaac Brock•4/28/23, 1:15 PM

oh nvm found the one from beore

Isaac Brock•4/28/23, 1:18 PM

oh, is this for a model? i was thinking just a lora

IIsaac Brock oh, is this for a model? i was thinking just a lora

Furkan Gözükara SECourses•4/28/23, 1:18 PM

ok there are several ones

Furkan Gözükara SECourses•4/28/23, 1:19 PM

you really should watch this - it is old but it teaches fundamentals

Furkan Gözükara SECourses•4/28/23, 1:19 PM

https://youtu.be/Bdl-jWR3Ukc

YouTubeSECourses

Zero To Hero Stable Diffusion DreamBooth Tutorial By Using Automati...

Our Discord : https://discord.gg/HbqgGaZVmr. The most advanced tutorial of Stable Diffusion Dreambooth Training. If I have been of assistance to you and you would like to show your support for my work, please consider becoming a patron on

https://www.patreon.com/SECourses

Playlist of Stable Diffusion Tutorials, Automatic1111 and Google Colab ...

Furkan Gözükara SECourses•4/28/23, 1:19 PM

then for installation this one

Furkan Gözükara SECourses•4/28/23, 1:19 PM

https://youtu.be/pom3nQejaTs

YouTubeSECourses

How To Install New DREAMBOOTH & Torch 2 On Automatic1111 Web UI PC ...

Discord : https://bit.ly/SECoursesDiscord. Torch 2 / Pytorch 2 is now supported along with new DreamBooth Automatic1111 Web UI extension. If I have been of assistance to you and you would like to show your support for my work, please consider becoming a patron on

https://www.patreon.com/SECourses

In this video, I am explaining how you can man...

Furkan Gözükara SECourses•4/28/23, 1:19 PM

and finally for best settings and configuration this one

Furkan Gözükara SECourses•4/28/23, 1:20 PM

https://youtu.be/sRdtVanSRl4

YouTubeSECourses

Epic Web UI DreamBooth Update - New Best Settings - 10 Stable Diffu...

RunPod: https://bit.ly/RunPodIO. Discord : https://bit.ly/SECoursesDiscord. Web UI DreamBooth got epic update and we tested all new features to find the best settings (10). If I have been of assistance to you and you would like to show your support for my work, please consider becoming a patron on

https://www.patreon.com/SECourses

Playlist of...

Isaac Brock•4/28/23, 1:20 PM

i have dreambooth and torch 2 already

IIsaac Brock i have dreambooth and torch 2 already

Furkan Gözükara SECourses•4/28/23, 1:20 PM

ok you can skip installation

Furkan Gözükara SECourses•4/28/23, 1:20 PM

if you also not interested in fundementals

Furkan Gözükara SECourses•4/28/23, 1:20 PM

just watch this one

Furkan Gözükara SECourses•4/28/23, 1:20 PM

https://youtu.be/sRdtVanSRl4

YouTubeSECourses

Epic Web UI DreamBooth Update - New Best Settings - 10 Stable Diffu...

https://www.patreon.com/SECourses

Playlist of...

Zono50•4/28/23, 1:58 PM

my prompt is listed as such - photo,of,ohwx,<lora:Krysta_2000:1>, <lora:epiNoiseoffset_v2:1>

ZZono50 my prompt is listed as such - photo,of,ohwx,<lora:Krysta_2000:1>, <lora:epiNoise...

Furkan Gözükara SECourses•4/28/23, 2:16 PM

i think you can ask the developer but not sure they would answer or not

Zono50•4/28/23, 2:16 PM

i'll probably play around with the weights and see what happens

Zono50•4/28/23, 2:18 PM

i erased my negative prompt and now it seems to be working, i swear negative prompts seem to do more tharm than good when it comes to custom lora moddels

Zono50•4/28/23, 2:19 PM

i used bad-hands5 negative prompt and kept turning her african

ZZono50 i used bad-hands5 negative prompt and kept turning her african

Furkan Gözükara SECourses•4/28/23, 2:22 PM

haha :d ye sometimes simpler prompts much better

Zono50•4/28/23, 2:25 PM

can you explain a little bit how the tokenizer works, and how i can use it to help my prompting?

Zono50•4/28/23, 2:26 PM

or does it not really matter cause they all get combined anyways

FFurkan Gözükara SECourses Click to see attachment

AlexP•4/28/23, 2:29 PM

This looks amazing

Zono50•4/28/23, 2:37 PM

do you recommend kohya or automatic1111 dreambooth for lora generation? or does it matter?

AlexP•4/28/23, 2:43 PM

@Furkan Gözükara SECourses After a week of struggling to understand and to get things to run and not crash in the middle of training I have finally managed to get some acceptable results. Thanks to your tutorials and advice. Now on to style training...

Zono50•4/28/23, 3:18 PM

if i write multiple words in my prompt, should i surround them with parenthesis?

Zono50•4/28/23, 3:18 PM

like i'm doing an indian, and i wrote "face with intricate warpaint"

Joyfie•4/28/23, 3:29 PM

Interesting, just watched the LoRA training guide, there's a lot of talk about Network Rank, it seems that lower network ranks seem to work well for some people, whereas the higher ranks seem preferable in other instances

Joyfie•4/28/23, 3:30 PM

I experimented a bit on my face, and I feel the higher network rate is much better, especially for finer details and 'ideas'

weilu•4/28/23, 3:38 PM

I just watched the tutorial about Lora, if I want to train an illustration style, how should I set the Dimension and Alpha?

Isaac Brock•4/28/23, 3:54 PM

where is the tutorial for making a lora?

Isaac Brock•4/28/23, 3:54 PM

do i have to use dreambooth?

Isaac Brock•4/28/23, 3:54 PM

i want to be able to use any model, so I dont want to make a dreambooth model

DrSteve N3TBJ•4/28/23, 3:57 PM

@Furkan Gözükara SECourses Doctor G, I want to follow along with your latest video with the Kohya LoRA Stable Diffusion training. I'm on GNU/Linux, will that make a difference? I don't think I'd use Visual Studio for example. Thank you for all of the work you put into every one of your videos!!!

Eggo•4/28/23, 4:03 PM

Hey! Watching your new Lora video now. Although, I thought using dream booth extension for Lora training was better? Should I continue using dream booth, or Kohya gui?

FFurkan Gözükara SECourses i just tested and it works

pat._.fenis•4/28/23, 4:13 PM

What version of the LDSR model are you using ? Is xformers required in the command line arggs for LDSR?

Zono50•4/28/23, 4:39 PM

I totally forgot i had a new installation and forgot to redownload VAE

Zono50•4/28/23, 4:39 PM

no wonder my stuff ain't been looking top notch

TheRustingDeadAdmin•4/28/23, 4:45 PM

the only decent images i get are from img2img, never gotten any decent results from training. GTX 1070 8GB

DrSteve N3TBJ•4/28/23, 4:50 PM

@Furkan Gözükara SECourses Odd, I'm following along with the Kohya LoRA video and I don't seem to have the same interface? I don't see the Network Rank and Network Alpha and I don't see anything about LORA on the interface? I don't know what I could have done wrong.

Isaac Brock•4/28/23, 4:53 PM

\stable-diffusion-webui\venv\lib\site-packages\torchvision\transforms\functional_tensor.py:5: UserWarning: The torchvision.transforms.functional_tensor module is deprecated in 0.15 and will be removed in 0.17. Please don't rely on it. You probably just need to use APIs in torchvision.transforms.functional or in torchvision.transforms.v2.functional.
?

DDrSteve N3TBJ @Furkan Gözükara SECourses Odd, I'm following along with the Kohya LoRA video an...

DrSteve N3TBJ•4/28/23, 4:58 PM

Never mind me. I am so dumb I was in the "DREAM BOOTH" tab NOT the Dreambooth LORA" tab, I guess I missed that part.

Zono50•4/28/23, 5:03 PM

Great Kohya video! Didn't realize that you didn't need captions unless you were training multiple styles

goody•4/28/23, 5:13 PM

is it possible to train Kandinsky w/ DB? not super clear to me on how much is model, how much is code

Isaac Brock•4/28/23, 5:25 PM

in the new lora tutorial you say to install the old torch i just uninstalled for 2

Thank you for your prompt response, I think I missed that one, will look into that and share the res

Similar Threads