![Rat Rig Community [Unofficial]](https://cdn.discordapp.com/icons/582187371529764864/08375bea6b5b9088b6d4cfc2b6e25fba.webp?size=48){kind=icon}
PAM Problem
I installed PAM yesterday and it works. However, my traditional bed mesh runs first and then PAM. I was hoping PAM would become the only bed mesh.
Hif you are using ratos then you have most likely changed any of the macros
LWould installing Obico change a macro? I didn't change any intentionally.
LThis is my console since starting the printer.
message.txt24.21KB
Hplease share your printer.cfg
Lmessage.txt15.6KB
Hshow your slicer start gcode
LM190 S0 ; Prevents prusaslicer from prepending m190 to the gcode interfering with the macro
M109 S0 ; Prevents prusaslicer from prepending m109 to the gcode interfering with the macro
;SET_GCODE_VARIABLE MACRO=RatOS VARIABLE=relative_extrusion VALUE=True
START_PRINT EXTRUDER_TEMP=[first_layer_temperature] BED_TEMP=[first_layer_bed_temperature]
MESH_CONFIG X0={first_layer_print_min[0]} Y0={first_layer_print_min[1]} X1={first_layer_print_max[0]} Y1={first_layer_print_max[1]}
START_PRINT EXTRUDER_TEMP=[first_layer_temperature] BED_TEMP=[first_layer_bed_temperature]
M109 S0 ; Prevents prusaslicer from prepending m109 to the gcode interfering with the macro
;SET_GCODE_VARIABLE MACRO=RatOS VARIABLE=relative_extrusion VALUE=True
START_PRINT EXTRUDER_TEMP=[first_layer_temperature] BED_TEMP=[first_layer_bed_temperature]
MESH_CONFIG X0={first_layer_print_min[0]} Y0={first_layer_print_min[1]} X1={first_layer_print_max[0]} Y1={first_layer_print_max[1]}
START_PRINT EXTRUDER_TEMP=[first_layer_temperature] BED_TEMP=[first_layer_bed_temperature]
Hdo you see the error?
Hyou are calling
START_PRINTYes. Also M190 S0 twice. Thanks Easy fix.
Hno, the other one is 109
LThat's why you're the king. I wasn't dyslexic yesterday but today's a new day. thanks again.
![Rat Rig Community [Unofficial]](https://cdn.discordapp.com/icons/582187371529764864/08375bea6b5b9088b6d4cfc2b6e25fba.webp?size=16){kind=icon}