Jlooks like olowalu landing! enjoy the surf!
Jhttps://mfg-sim.com/en/MFG%20-Blog/news/rudder-pedals-stock-outage For info, here is when MFG Crosswind V3 pedals will be back in stock (June 10)
Milan Flight Gear
We will be out of stock till approx 10.June.2023 untill new batch of electronics arrive :-( I hope you have patience to wait. Of course, chip shortages are the reason of this outage - ordered more than a year ago and still waiting :-( We even redesigned electronics for different chip but abandoned the idea as chips finally ,almost, arrived Than...
RBefore I board my plane what can I download to start looking at how to install the rhino and bind keys and adjust settings. I fly dcs helicopters and msfs helicopters only.
PHey m8, not too sure what you can do to 'get ready' for the Rhino. What you need is the VPforce Config software, also for DCS (soon msfs too) the Telemetry app will give you ffb effects for all the aircraft, you can tweak this further later, if I understand it right it only adds effects it won't overwrite any native ffb effects from the module. MSFS currently needs paid 3rd party software most ppl use XPForce though there are other options, the VPforce telem app is being worked on for msfs compatibility too, should be released soon. The VPforce Loopback app is also handy, if you have a grip that doesn't plug directly into the Rhino base i.e. VKB grip with passthrough adapter, or a custom grip that has it's own usb, you can use the Loopback app to make the sim see the grip & Rhino as one unit, can also use HID Hide too if you want to hide the grip from being seen by the game too.
Pthe DCS heli's force trim should 'just work' otb with the Rhino, just make sure in DCS settings you have the FFB enabled (obviously) but also special settings for each heli & make sure the force trim is set to default, not no spring & FFB, that should read 'no spring or FFB'. Trim in general should work too for warbirds etc. If you use a mod aircraft like the blackhawk you will need to add it to the Telem app config, but also in the VPforce config software you need to bind buttons for force trim in the 'Effects' tab
3@86th_piranha
386th_Piranha#6935
3!86th_Piranha#6935
JThink im gonna have slipping issues running a 72 and 12 tooth pulley this close together? Im getting about 30% engagement on the 12 tooth. I could include some bearings as tensioners
LI found a bug, when you change the seat from pilot to gunner in Apache, the FFB will not work anymore, you've got no hardware trim.
Lanyone had the problem before?
V:package: 
RHINO #0091 Has Shipped!
RHINO #0091 Has Shipped!V:package: 
RHINO #0092 Has Shipped!
RHINO #0092 Has Shipped!
WThat sounds like it could be a DCS bug
JI've heard of/experienced similar desync issues with other modules that have switchable seats
JYou definitely do have an increased risk of shearing off the teeth with only 3.6 teeth in mesh. The number of teeth a belt needs in order to transfer the highest working force a belt should be used with to the pulley is about 6.
With some rough calculation your safety factor from shearing off the teeth, assuming you use a 9mm belt, is only 1.15.
I would certainly advise you to use an idler to increase the number of meshed teeth.
With some rough calculation your safety factor from shearing off the teeth, assuming you use a 9mm belt, is only 1.15.
I would certainly advise you to use an idler to increase the number of meshed teeth.
MHi @walmis - Looking for a quick release mount for the Rhino and wondered if the screw dimensions were the same as anything else? I ask because the monstertech plate you supplied was for something else right? Maybe a large Virpil base? Or is it unique and the monstertech is bespoke to the Rhino? Thanks!
WHi, the MT plate was custom designed for the Rhino.
Mah, good to know! I'll have to work something out then as it's all mounted to a 8040 alu frame on a yaw2 and need to keep weight down so want to swap out the rhino weight for a fanatec csl dd when driving. Been tricky to find a solution so far 
JI assume m8 or m6 screws
JFastest would be to quick release where the monstertech mount interfaces with the 8040 frame
JI'm planning to do something similar for throttle
Jgreat thanks for the response
MThanks. It could be either m8 or m6. For everything else I've used the quick releases from https://qr4rigs.com/ which have been great for swapping out pedals with rudders and the wheel and they do have some generic ones so I'm seeing what can be done there
QR4Rigs, Quick release Mounts for Sim Rigs : - Quick Release System Fanatec Authentikit Honeycomb Kensington Logitech/Saitek MFG MOZA Racing SIMagic Simucube Thrustmaster VRS Virpil (VPC) VKB Dust Plates Winwing Universal QR4rigs Systems 40-Series Profile Interface Kits Quick Release Base Mounts VNM Turtle Beach quick release, quick release mou...
Jitd likely be 16-20mm in length
Ji think the monstertech mounts use counter sink screws so more likely to be 16mm
MI'm currently mounting the rhino using the custom monstertech to a 4040 peice coming out from the long 8040 sides most rigs have as the foundation and that's working fine. Just wanted a faster way of removing it. I think Q4Rigs might have something, just need to dig down and be creative 
JYeah since you already have it then you'll know exact lengths you need etc.
JSpeaking of, do you or anyone else happen to know what these circled parts would be called? Appear to be some sort of bolt spacer or something.
MI've not seen those before, they look useful though. Hope you find them!
FYou could always ask Randy from Laserwing since those pics are from his simpit.
JTrue, I just didn't want to bother them if I didn't have to 
Jhttps://fselite.net/content/jardesign-shares-preview-for-co-pilot-add-on-for-msfs/ For the MSFS players, this looks very promising even in early development stage 
FSEliteCalum
Have a virtual co-pilot be able to interact with your aircraft in Microsoft Flight Simulator.
RJust unboxed it.
R
RExcellent, just got home and unboxed. Will be a few days before I can install. My goal for now is getting the DCS helo's to work. I fly the 60 and huey mostly, but also give the 64 and mi8 some love.
IWill be pretty much good to go out the box with the basic software
TWhat is the certificate behind? Are you a real life heli pilot?
BIt says 1000 flights as EMT, sooooooo I'm guessing flight medic
Tok! Interesting! 
JFlight nurse.
JI’d guess?
V:package: 
RHINO #0095 Has Shipped!
RHINO #0095 Has Shipped!V:package: RHINO #0096 Has Shipped!
RHINO #0096 Has Shipped!JI think that's mine
Pwell your names red 
AIt’s a sign!
JI have shipping info now 
JThe import fee for US was like $30-50 right
SLikely a silly question...
I am looking at ordering a kit....and I see them listed as
86BLF03 x1 and 86BLF03 x2 and such.
I am assuming I need to order an x2 kit to build the stick base yes?
Thanks
I am looking at ordering a kit....and I see them listed as
86BLF03 x1 and 86BLF03 x2 and such.
I am assuming I need to order an x2 kit to build the stick base yes?
Thanks