VPforce Controls•3y ago

This is my Current VPC Cyclic

B9OP•5/17/23, 12:29 PM

In filling out the form, Discord handle
In the form name#1234. This will allow status updates via discord (in development)
B9#9487
Wrong user pattern

B9OP•5/17/23, 12:29 PM

Am I doing something wrong?

B9OP•5/17/23, 12:32 PM

Does your form only work with GMAIL?

B9OP•5/17/23, 12:33 PM

Did you receive my order form?

Jon (Bounty_V)•5/17/23, 12:35 PM

You would receive an e-mail confirmation.

It is all automated.

Jon (Bounty_V)•5/17/23, 12:38 PM

It just wants your discord name. B9#9487 is your current discord name.

B9OP•5/17/23, 1:05 PM

Deleted User•5/17/23, 1:09 PM

This is the maximum Height My Cyclic can be on my Monstertech Cockpit 60.96 cm

This_is_the_maximum_Height_My_Cyclic_can_be_on_my_Monstertech_Cockpit.jpg

BB9 Click to see attachment

walmis•5/17/23, 1:35 PM

You can try again, I fixed the form

DDeleted User This is the maximum Height My Cyclic can be on my Monstertech Cockpit 60.96 cm

Jon (Bounty_V)•5/17/23, 1:38 PM

https://discord.com/channels/965234441511383080/986474224241741884/987268082219253770 the dimensions are here

B9OP•5/17/23, 2:18 PM

Are your measurements in mm?

BB9 Are your measurements in mm?

walmis•5/17/23, 2:33 PM

Yes, it's mm and [inch]

B9OP•5/17/23, 2:56 PM

This image I found in your reviews section is perfect absoletely perfect. I don't have permissions to message in the reviews section plus the support section.

B9OP•5/17/23, 3:08 PM

The image above that I found in the reviews section is from KNIGHT

Knight59•5/17/23, 3:47 PM

I actually ended up dropping my floor plate down to get some more clearance.

Knight59•5/17/23, 3:48 PM

Here's how it sits today, until the arrival of my MPS seat...

rn_image_picker_lib_temp_bbc7567a-f603-486d-9da2-a846c2780d41.jpg

KKnight59 Here's how it sits today, until the arrival of my MPS seat...

Jon (Bounty_V)•5/17/23, 3:57 PM

Have to thank monster tech tho, makes Rhino lead times feel short

Knight59•5/17/23, 4:00 PM

No joke - been waiting since December for my MPS and paid in full back then

Jon (Bounty_V)•5/17/23, 4:01 PM

I still need to order some parts from MonsterTech so I can mount flight sim gear to my new cockpit. Won't be able to place an order until July, so probably August or later to first use my Rhino

Knight59•5/17/23, 4:06 PM

Plan for December

Knight59•5/17/23, 4:06 PM

Lol

Jon (Bounty_V)•5/17/23, 4:07 PM

Lolol

Number481•5/17/23, 4:33 PM

man... I couldn't wait that long.. I'd be at the hardware store figuring out what I could glue/screw/weld together to get that puppy installed...

I didn't want to wait for how long it would take to get the laser cut / bent parts for the virpil desk mount adapter I designed, so I went to my garage and started cutting scrap wood

WhereNoLarkFlew•5/17/23, 5:07 PM

How long are the wait times for this thing?

BB9 This is my Current VPC Cyclic

Justin•5/17/23, 5:09 PM

What chair is that?

Jon (Bounty_V)•5/17/23, 5:11 PM

Looks like the MPS from MonsterTech, with an Andre's Jetpad or similar on top

B9OP•5/17/23, 5:12 PM

If you are referring to my image it is the Mosntertech Helicopter Pilot Seat

My_Monstertech_helicopter_cockpit_plus_my_Virpil_Helicopter_Controls.jpg

Justin•5/17/23, 5:13 PM

Sick

Justin•5/17/23, 5:14 PM

I'm looking for seat that doesn't go up all the way, like a bench seat. So my VR isn't catching on the back headrest

Deleted User•5/17/23, 5:15 PM

I just ordered VPC Constellation ALPHA Prime [R] Image plus VPC SharKa-50 Collective Grip, Plus the three VPC extensions.

B9OP•5/17/23, 5:19 PM

Here is a couple more pictures of my Monsterteck Helicopter Cockpit

BB9 If you are referring to my image it is the Mosntertech Helicopter Pilot Seat

PiNKSH!T•5/17/23, 5:19 PM

Hey m8, just wondering what games/sims you use the HF8 with? Have they made the plugin for dcs yet? Can you use it with the software so it just reads the telem from a sim & not need their plugin or via the audio jack, the same software the andre's jet seat use? Cheers m8, nice set up too

BB9 If you are referring to my image it is the Mosntertech Helicopter Pilot Seat

slowmover•5/17/23, 5:21 PM

Nice seat mate. where did you bough it?

KKnight59 Here's how it sits today, until the arrival of my MPS seat...

Reed•5/17/23, 5:21 PM

What cyclic extension is that

B9OP•5/17/23, 5:22 PM

https://www.monstertechusa.com/product-category/mts/sets-mts/, https://www.monster.tech/en/

MTSIM – MONSTERTECH USA

Sets – MTSIM – MONSTERTECH USA

MTSIM – MONSTERTECH

MTSIM – MONSTERTECH – Simulation Design – Official Website

High quality simulation solutions. Flight & racing cockpits, pilot seats, table and chair mounts for joystick / HOTAS systems, and much more...

Deleted User•5/17/23, 5:23 PM

https://www.monster.tech/en/

MTSIM – MONSTERTECH

MTSIM – MONSTERTECH – Simulation Design – Official Website

High quality simulation solutions. Flight & racing cockpits, pilot seats, table and chair mounts for joystick / HOTAS systems, and much more...

B9OP•5/17/23, 5:24 PM

https://virpil-controls.us.com/vpc-flightstick-extension.html

VPC Flightstick Extension

Features

★ Available in 50mm/75mm/100mm
★ Increased Precision and Smoother Handling
★ Allows for Offset Grip Rotation - Perfect for Center Mounted Setups
★ Includes Cable Extensions
★ Metal Construction

Deleted User•5/17/23, 5:31 PM

I Just ordered the VPforce 'RHINO' Force Feedback Base

RReed What cyclic extension is that

Knight59•5/17/23, 5:35 PM

Virpil z-extension attached to their 100 mm straight extension.

B9OP•5/17/23, 5:36 PM

I did not purchase the Virpil z-extension as it does not apply to me

Knight59•5/17/23, 5:37 PM

Yea only needed if you don't have a center cutout. Really wish my MPS was here!! Lol. You're lucky B9. Enjoying that seat? Comfortable?

B9OP•5/17/23, 5:37 PM

The seat is just amazing! really amazing.

Knight59•5/17/23, 5:38 PM

Awesome. I have the same one on order in cordura fabric. (My cat would have a field day with the synthetic leather)

B9OP•5/17/23, 5:41 PM

I really like the one piece custom made Cyclic from [BSD]Reed, The whole setup looks amazing

BB9 I really like the one piece custom made Cyclic from [BSD]Reed, The whole setup l...

Knight59•5/17/23, 5:42 PM

Agreed! I'd pay for that extension in a heart beat

B9OP•5/17/23, 5:46 PM

I would purchase that extension from him as well. Once my VPforce 'RHINO' Force Feedback Base arrives and is setup on Monstertech Helicopter Cockpit I would take my measurements and send it to him to make me one.

B9OP•5/17/23, 5:51 PM

Knight you did all the work for me in mounting my VPforce 'RHINO' Force Feedback Base when it arrives. WOW you really did an amazing job in mounting it to Helicopter Cockpit. WOW really nice work!!

B9OP•5/17/23, 5:53 PM

Knight this is the current VPC extension you see in my images, VPC Flightstick Extension - 200mm, https://virpil-controls.us.com/vpc-flightstick-extension-200mm.html

VPC Flightstick Extension - 200mm

★ 200mm Flightstick Extension
★ "S-Curve" perfect for center mount setups
★ Increased Precision and Smoother Handling
★ Allows for Offset Grip Rotation - Perfect for Center Mounted Setups
★ Includes Cable Extension
★ Metal Construction

B9OP•5/17/23, 5:55 PM

Knight Plus I just ordred these three Extensions to fine tune my cyclic setup after my VPforce 'RHINO' Force Feedback Base arrives, https://virpil-controls.us.com/vpc-flightstick-extension.html

VPC Flightstick Extension

Knight59•5/17/23, 5:57 PM

Yea I have that 200mm curved extension as well. I like it but without the seat cutout I still couldn't get it close enough for comfort/ergonomics.

This is my Current VPC Cyclic

Similar Threads

Similar Threads

Similar Threads