Software Engineering Courses (SECourses)•3y ago

i did it! i got 1.13.1+cu117 to work! also copied the cudnn dlls into the torch/lib folder for good

i did it! i got 1.13.1+cu117 to work! also copied the cudnn dlls into the torch/lib folder for good measure. it didn't work again, but there was a message that showed up this time! Right at the start of training before the rest of the steps like image set detection occur.

[WinError 127] The specified procedure could not be found

[WinError 127] The specified procedure could not be found

WARNING:root:WARNING: [WinError 127] The specified procedure could not be found

WARNING:root:WARNING: [WinError 127] The specified procedure could not be found

Need to compile C++ extensions to get sparse attention suport. Please run python setup.py build develop

Need to compile C++ extensions to get sparse attention suport. Please run python setup.py build develop

prepare tokenizer

prepare tokenizer

Fflowwolf i did it! i got 1.13.1+cu117 to work! also copied the cudnn dlls into the torch...

Furkan Gözükara SECourses•5/25/23, 10:35 PM

but working now?

flowwolfOP•5/25/23, 10:36 PM

nope!

i dont know what else to do . i think i broke it by trying to install new xformers. might just keep experimenting in the webui-extension but i can't seem to get styles to not look over trained there.

flowwolfOP•5/25/23, 10:38 PM

no indication of what the problem is is really quite frustrating. not sure why the script won't log anything or error out or what

felixsanz•5/25/23, 10:43 PM

when comparing checkpoints (steps, methods, etc), what parameters do you guys use on XYZ? only seed and checkpoint?

flowwolfOP•5/25/23, 10:45 PM

i do batches of 4 so each cell gets 4 seeds anyways. checkpoint and cfg are ones i'll try. sometimes prompt s/r. you can try different prompts with it or different lora weights. the :1> can s/r to :0.5>, :1.5>, etc. more a lora thing

felixsanz•5/25/23, 10:46 PM

what cfgs you try? and why?

Ffelixsanz when comparing checkpoints (steps, methods, etc), what parameters do you guys us...

Furkan Gözükara SECourses•5/25/23, 10:47 PM

you can try cfg

Furkan Gözükara SECourses•5/25/23, 10:47 PM

and perhaps pre selected seeds

Furkan Gözükara SECourses•5/25/23, 10:47 PM

added some more prompts : https://github.com/FurkanGozukara/Stable-Diffusion/blob/main/Midjourney-Level-Realism.md

GitHub

Stable-Diffusion/Midjourney-Level-Realism.md at main · FurkanGozuka...

Best Stable Diffusion and AI Tutorials, Guides, News, Tips and Tricks - Stable-Diffusion/Midjourney-Level-Realism.md at main · FurkanGozukara/Stable-Diffusion

flowwolfOP•5/25/23, 10:48 PM

5-9[5] is my usual setting. when i'm generating its around 7 usually but if im testing a model i want to see what a range looks like

felixsanz•5/25/23, 10:48 PM

pre selected seeds = try seeds until you have some that look great, so you can compare on best possible seeds?

Ffelixsanz pre selected seeds = try seeds until you have some that look great, so you can c...

Furkan Gözükara SECourses•5/25/23, 10:48 PM

yes

Fflowwolf nope! i dont know what else to do . i think i broke it by trying to install ne...

Furkan Gözükara SECourses•5/25/23, 10:48 PM

if you are our patreon supporter i can connect your computer and install

flowwolfOP•5/25/23, 10:48 PM

maybe sometime thanks

FFurkan Gözükara SECourses you can try cfg

felixsanz•5/25/23, 10:49 PM

what cfgs do you try?

felixsanz•5/25/23, 10:49 PM

4,7,11 is fine?

Ffelixsanz 4,7,11 is fine?

Furkan Gözükara SECourses•5/25/23, 10:50 PM

i try usually 4,5,6,7,8,9,10,11,12

Furkan Gözükara SECourses•5/25/23, 10:50 PM

if i do

felixsanz•5/25/23, 10:51 PM

but at the same time? X=seed, Y=checkpoint, Z=cfg?

Ffelixsanz but at the same time? X=seed, Y=checkpoint, Z=cfg?

Furkan Gözükara SECourses•5/25/23, 10:51 PM

yes you can use

Furkan Gözükara SECourses•5/25/23, 10:51 PM

but which order looks best

Furkan Gözükara SECourses•5/25/23, 10:51 PM

you need to test

felixsanz•5/25/23, 10:52 PM

i'm gonna use seed as Z i think, as it's separated in "another dimension"

felixsanz•5/25/23, 10:55 PM

let's see if the freaking plot script is not still broken... Xd 8640 steps

LLacerda613 It will not start if I disable my Wi-Fi.

PickledJoi•5/25/23, 10:55 PM

it should start without a problem if you already installed the dependencies (by launching with your internet on at least once). what exactly are you doing to disable your wifi

flowwolfOP•5/25/23, 11:16 PM

@Furkan Gözükara SECourses those were great pointers, but i'll come back to this problem another time. thanks for the help!

Fflowwolf @Furkan Gözükara SECourses those were great pointers, but i'll come back to this...

Furkan Gözükara SECourses•5/25/23, 11:39 PM

you are welcome

RomanSlack•5/26/23, 12:38 AM

@Furkan Gözükara SECourses I am attempting to train a Lora following your video, however I am getting this error when clicking (Train).

Traceback (most recent call last):
  File "/workspace/kohya_ss/train_network.py", line 783, in <module>
    train(args)
  File "/workspace/kohya_ss/train_network.py", line 146, in train
    text_encoder, vae, unet, _ = train_util.load_target_model(args, weight_dtype, accelerator)
  File "/workspace/kohya_ss/library/train_util.py", line 3023, in load_target_model
    text_encoder, vae, unet, load_stable_diffusion_format = _load_target_model(
  File "/workspace/kohya_ss/library/train_util.py", line 2989, in _load_target_model

Traceback (most recent call last):
  File "/workspace/kohya_ss/train_network.py", line 783, in <module>
    train(args)
  File "/workspace/kohya_ss/train_network.py", line 146, in train
    text_encoder, vae, unet, _ = train_util.load_target_model(args, weight_dtype, accelerator)
  File "/workspace/kohya_ss/library/train_util.py", line 3023, in load_target_model
    text_encoder, vae, unet, load_stable_diffusion_format = _load_target_model(
  File "/workspace/kohya_ss/library/train_util.py", line 2989, in _load_target_model

RomanSlack•5/26/23, 12:39 AM

How could I solve this?

RomanSlack•5/26/23, 12:43 AM

I looked in my files and I am missing the train_network.py, file

RomanSlack•5/26/23, 1:07 AM

I read all of these solutions and tried, them but none worked, https://www.reddit.com/r/StableDiffusion/comments/114e0nj/kohya_ss_error_how_do_i_solve_this/

r/StableDiffusion - kohya_ss error. How do I solve this?

3 votes and 33 comments so far on Reddit

RRomanSlack @Furkan Gözükara SECourses I am attempting to train a Lora following your video,...

Furkan Gözükara SECourses•5/26/23, 1:15 AM

i dont see error messsage here. but try adamw instead of adam8bit

RomanSlack•5/26/23, 1:21 AM

I did, same result

RomanSlack•5/26/23, 1:23 AM

subprocess.CalledProcessError: Command '['C:\\Stable-Diffusion\\kohya_ss\\venv\\Scripts\\python.exe', 'train_network.py', '--enable_bucket', '--pretrained_model_name_or_path=runwayml/stable-diffusion-v1-5', '--train_data_dir=C:/Stable-Diffusion/Emma/Process lora/Emma lora/image/', '--resolution=512,512', '--output_dir=C:/Stable-Diffusion/Emma/Process lora/Emma lora/model', '--logging_dir=C:/Stable-Diffusion/Emma/Process lora/Emma lora/log', '--network_alpha=1', '--save_model_as=safetensors', '--network_module=networks.lora', '--text_encoder_lr=5e-5', '--unet_lr=0.0001', '--network_dim=8', '--network_weights=C:/Users/archi/Downloads/LoraLowVRAMSettings.json', '--output_name=last', '--lr_scheduler_num_cycles=1', '--learning_rate=0.0001', '--lr_scheduler=cosine', '--lr_warmup_steps=150', '--train_batch_size=1', '--max_train_steps=1496', '--save_every_n_epochs=1', '--mixed_precision=fp16', '--save_precision=fp16', '--seed=1234', '--cache_latents', '--bucket_reso_steps=64', '--mem_eff_attn', '--gradient_checkpointing', '--xformers', '--use_8bit_adam', '--bucket_no_upscale']' returned non-zero exit status 1.

subprocess.CalledProcessError: Command '['C:\\Stable-Diffusion\\kohya_ss\\venv\\Scripts\\python.exe', 'train_network.py', '--enable_bucket', '--pretrained_model_name_or_path=runwayml/stable-diffusion-v1-5', '--train_data_dir=C:/Stable-Diffusion/Emma/Process lora/Emma lora/image/', '--resolution=512,512', '--output_dir=C:/Stable-Diffusion/Emma/Process lora/Emma lora/model', '--logging_dir=C:/Stable-Diffusion/Emma/Process lora/Emma lora/log', '--network_alpha=1', '--save_model_as=safetensors', '--network_module=networks.lora', '--text_encoder_lr=5e-5', '--unet_lr=0.0001', '--network_dim=8', '--network_weights=C:/Users/archi/Downloads/LoraLowVRAMSettings.json', '--output_name=last', '--lr_scheduler_num_cycles=1', '--learning_rate=0.0001', '--lr_scheduler=cosine', '--lr_warmup_steps=150', '--train_batch_size=1', '--max_train_steps=1496', '--save_every_n_epochs=1', '--mixed_precision=fp16', '--save_precision=fp16', '--seed=1234', '--cache_latents', '--bucket_reso_steps=64', '--mem_eff_attn', '--gradient_checkpointing', '--xformers', '--use_8bit_adam', '--bucket_no_upscale']' returned non-zero exit status 1.

FFurkan Gözükara SECourses it still works. are you using dev version of the atuomatic1111? try with dev bra...

kevh•5/26/23, 1:35 AM

how would i use the dev version on the colab? I'm using TheLastBen's colab here: https://colab.research.google.com/github/TheLastBen/fast-stable-diffusion/blob/main/fast_stable_diffusion_AUTOMATIC1111.ipynb

Google Colaboratory

RRomanSlack `subprocess.CalledProcessError: Command '['C:\\Stable-Diffusion\\kohya_ss\\venv\...

Furkan Gözükara SECourses•5/26/23, 1:39 AM

try this

Kkevh how would i use the dev version on the colab? I'm using TheLastBen's colab here:...

Furkan Gözükara SECourses•5/26/23, 1:39 AM

well this may not work as good as on pc

Furkan Gözükara SECourses•5/26/23, 1:39 AM

that is why

Furkan Gözükara SECourses•5/26/23, 1:39 AM

you can use runpod alternatively

RomanSlack•5/26/23, 1:39 AM

Ok, thank you

FFurkan Gözükara SECourses well this may not work as good as on pc

kevh•5/26/23, 1:40 AM

my pc doesn't have enough vram, so i paid for google colab compute GPUs. i guess if i pay for runpod then it'll work?

Kkevh my pc doesn't have enough vram, so i paid for google colab compute GPUs. i guess...

Furkan Gözükara SECourses•5/26/23, 1:41 AM

yes runpod works

Furkan Gözükara SECourses•5/26/23, 1:41 AM

i have necessary tutorials

Furkan Gözükara SECourses•5/26/23, 1:42 AM

you can see tutorials list here : https://github.com/FurkanGozukara/Stable-Diffusion

GitHub

GitHub - FurkanGozukara/Stable-Diffusion: Best Stable Diffusion and...

Best Stable Diffusion and AI Tutorials, Guides, News, Tips and Tricks - GitHub - FurkanGozukara/Stable-Diffusion: Best Stable Diffusion and AI Tutorials, Guides, News, Tips and Tricks

Furkan Gözükara SECourses•5/26/23, 1:42 AM

search runpod word

Furkan Gözükara SECourses•5/26/23, 1:42 AM

i am going to sleep hopefully see you tomorrow

FFurkan Gözükara SECourses yes runpod works

kevh•5/26/23, 1:43 AM

thank you! is there a way to use google colab to do it? just because i already have some compute on google colab and don't want to waste them

thebean•5/26/23, 3:52 AM

me: i don't really understand truncation error with regards to image diffusion samplers. can you lay it out in eli5 terms for me?

ChatGPT said:
Sure! Let's say you're baking cookies and the recipe calls for 1/3 cup of sugar. But your measuring cups only have 1/4 cup and 1/2 cup.

If you use the 1/4 cup, you won't be adding enough sugar. If you use the 1/2 cup, it will be too much. So, you decide to fill the 1/4 cup and add a little bit more, hoping it's about 1/3 cup.

The difference between the amount of sugar you actually added and the exact 1/3 cup the recipe called for is like the truncation error. It's a small error that comes from having to stop (or "truncate") your measuring because you don't have the exact tool (in this case, the right measuring cup) to get the precise amount.

In the case of the image diffusion, the "sampling steps" are like the measuring cups. If you could do an infinite number of steps, you could get the exact, perfect result. But in reality, you have to stop at some point (just like you can't keep adding sugar forever), and this results in a small error. Increasing the number of steps is like adding a bit more sugar to the 1/4 cup to try and get closer to the exact 1/3 cup you need.

thebean•5/26/23, 3:52 AM

how correct did chatGPT get this i wonder?

生

生死•5/26/23, 4:03 AM

hey guys i try this vedio but the cmd show this is means i dont process in GPU? my gpu is RX6600

Traceback (most recent call last): File "/workspace/kohya_ss/train_network.py", line 783, in <module> train(args) File "/workspace/kohya_ss/train_network.py", line 146, in train text_encoder, vae, unet, _ = train_util.load_target_model(args, weight_dtype, accelerator) File "/workspace/kohya_ss/library/train_util.py", line 3023, in load_target_model text_encoder, vae, unet, load_stable_diffusion_format = _load_target_model( File "/workspace/kohya_ss/library/train_util.py", line 2989, in _load_target_model

subprocess.CalledProcessError: Command '['C:\\Stable-Diffusion\\kohya_ss\\venv\\Scripts\\python.exe', 'train_network.py', '--enable_bucket', '--pretrained_model_name_or_path=runwayml/stable-diffusion-v1-5', '--train_data_dir=C:/Stable-Diffusion/Emma/Process lora/Emma lora/image/', '--resolution=512,512', '--output_dir=C:/Stable-Diffusion/Emma/Process lora/Emma lora/model', '--logging_dir=C:/Stable-Diffusion/Emma/Process lora/Emma lora/log', '--network_alpha=1', '--save_model_as=safetensors', '--network_module=networks.lora', '--text_encoder_lr=5e-5', '--unet_lr=0.0001', '--network_dim=8', '--network_weights=C:/Users/archi/Downloads/LoraLowVRAMSettings.json', '--output_name=last', '--lr_scheduler_num_cycles=1', '--learning_rate=0.0001', '--lr_scheduler=cosine', '--lr_warmup_steps=150', '--train_batch_size=1', '--max_train_steps=1496', '--save_every_n_epochs=1', '--mixed_precision=fp16', '--save_precision=fp16', '--seed=1234', '--cache_latents', '--bucket_reso_steps=64', '--mem_eff_attn', '--gradient_checkpointing', '--xformers', '--use_8bit_adam', '--bucket_no_upscale']' returned non-zero exit status 1.

i did it! i got 1.13.1+cu117 to work! also copied the cudnn dlls into the torch/lib folder for good

Similar Threads