Software Engineering Courses (SECourses)•3y ago

Hi Dr. Furkan and everyone, how did you solve the problem of XYZ producing the same images for all m

Hi Dr. Furkan and everyone, how did you solve the problem of XYZ producing the same images for all models? When I type "woman" the results look the same, even the first epoch version

KhangOP•5/28/23, 6:25 AM

I turned off the XYZ plot and tried using the same seed for each model. They create different images.
But when I use XYZ (with or without the same seed) it still show same images for all models

KhangOP•5/28/23, 6:26 AM

For some reasons the XYZ got stuck on 1 model

ashley•5/28/23, 9:14 AM

For anyone considering using the RunPod endpoints for training, I recommend not doing so. They are very expensive and also not very reliable. You pay $0.001 per second for Dreambooth training, then the job gets stuck for 45 minutes without even doing anything and you get charged almost $3 for nothing. Running pods is much cheaper, much more stable, and much more reliable, and you are in full control of everything.

Manwani•5/28/23, 9:55 AM

following this video tutorial
Zero To Hero Stable Diffusion DreamBooth Tutorial By Using Automatic1111 Web UI - Ultra Detailed

but when I clicked on "Load from" it is showing an error.
Does, anyone knows how to tackle this issue

Mmccoypauley is it OK to ask a question about the Lora training video here?

Furkan Gözükara SECourses•5/28/23, 10:14 AM

sure

AlaBeat•5/28/23, 10:14 AM

hello i get this error when i try to start kohya ss on runpod root@b12c8b7fa1ad:/workspace/kohya_ss# bash gui.sh --share
Traceback (most recent call last):
File "/workspace/kohya_ss/tools/validate_requirements.py", line 5, in <module>
from packaging.requirements import Requirement
ModuleNotFoundError: No module named 'packaging'
root@b12c8b7fa1ad:/workspace/kohya_ss#

KKhang Hi Dr. Furkan and everyone, how did you solve the problem of XYZ producing the s...

Furkan Gözükara SECourses•5/28/23, 10:14 AM

dev branch of automatic1111. they made a new release so do a git pull

Aashley For anyone considering using the RunPod endpoints for training, I recommend not ...

Furkan Gözükara SECourses•5/28/23, 10:15 AM

yep runpod is still best option with good gpu and good prices. i wouldnt trust their endpoint though. do setup with my video it works :d

MManwani following this video tutorial Zero To Hero Stable Diffusion DreamBooth Tutorial...

Furkan Gözükara SECourses•5/28/23, 10:16 AM

ok here updated how to install dreambooth tutorial : https://youtu.be/pom3nQejaTs

YouTubeSECourses

How To Install New DREAMBOOTH & Torch 2 On Automatic1111 Web UI PC ...

Discord : https://bit.ly/SECoursesDiscord. Torch 2 / Pytorch 2 is now supported along with new DreamBooth Automatic1111 Web UI extension. If I have been of assistance to you and you would like to show your support for my work, please consider becoming a patron on

https://www.patreon.com/SECourses

In this video, I am explaining how you can man...

AAlaBeat hello i get this error when i try to start kohya ss on runpod root@b12c8b7fa1ad:...

Furkan Gözükara SECourses•5/28/23, 10:17 AM

looks like you didnt follow venv part correctly. it should activate venv

AlaBeat•5/28/23, 10:17 AM

yes i think i know what caused it, didn't run in the end
./setup.sh -n

AlaBeat•5/28/23, 10:17 AM

will do it now and see how it goes

FFurkan Gözükara SECourses ok here updated how to install dreambooth tutorial : https://youtu.be/pom3nQejaT...

Manwani•5/28/23, 10:18 AM

just watching it currently, git cloning is finished from my end

FFurkan Gözükara SECourses yep runpod is still best option with good gpu and good prices. i wouldnt trust t...

ashley•5/28/23, 10:20 AM

Yep, just running a few tests to their dreambooth endpoint yesterday cost me $17, dedicated GPU pods can run for a little more than 2 days non stop for that price.

AlaBeat•5/28/23, 10:21 AM

works

Aashley Yep, just running a few tests to their dreambooth endpoint yesterday cost me $17...

Furkan Gözükara SECourses•5/28/23, 10:23 AM

wow 17$ huge

Furkan Gözükara SECourses•5/28/23, 10:23 AM

you could get like 50+ hours

FFurkan Gözükara SECourses you could get like 50+ hours

ashley•5/28/23, 10:27 AM

yes exactly

AlaBeat•5/28/23, 10:31 AM

so i tried to train, it didn't work, i think it was something either with torch or xformers, did a pip uninstall/install xformers, now i try to start kohya and get this root@b12c8b7fa1ad:/workspace/kohya_ss# bash gui.sh --share
Validating that requirements are satisfied.
Error: The following packages have the wrong version:
- timm==0.6.12 (expected version torch==1.12.1, found version 2.0.1)

Run upgrade.sh or pip install -U -r /workspace/kohya_ss/requirements.txt to resolve the missing requirements listed above...
root@b12c8b7fa1ad:/workspace/kohya_ss#

Furkan Gözükara SECourses•5/28/23, 10:35 AM

@AlaBeat did you make venv in that folder? like in video

AlaBeat•5/28/23, 10:35 AM

yes i have made venv

Furkan Gözükara SECourses•5/28/23, 10:36 AM

but it is using your system wide torch version

Furkan Gözükara SECourses•5/28/23, 10:36 AM

not using your venv

Furkan Gözükara SECourses•5/28/23, 10:36 AM

if you are our patreon supporter i can connect your pc and install

AlaBeat•5/28/23, 10:36 AM

i will install again torch in venv folder, even though i've done it already

Furkan Gözükara SECourses•5/28/23, 10:37 AM

something missing. it should use venv

Furkan Gözükara SECourses•5/28/23, 10:37 AM

not system wide default venv

AAlaBeat i will install again torch in venv folder, even though i've done it already

ashley•5/28/23, 10:37 AM

Make sure you activate your venv, just creating it does not activate it automatically

AlaBeat•5/28/23, 10:40 AM

will do it again, got an error saying i'm out of space

AAlaBeat will do it again, got an error saying i'm out of space

Furkan Gözükara SECourses•5/28/23, 10:43 AM

ye you need to increase runtime space because temp files will take space

AlaBeat•5/28/23, 10:44 AM

ok....

message.txt6KB

Furkan Gözükara SECourses•5/28/23, 10:46 AM

try a fresh pod i think. /workspace/kohya_ss/venv/bin/python3: No module named pip

AlaBeat•5/28/23, 11:09 AM

ok now how to fix this error when i start the train

message.txt4.35KB

AAlaBeat ok now how to fix this error when i start the train

Furkan Gözükara SECourses•5/28/23, 11:22 AM

how much vram you have?

Furkan Gözükara SECourses•5/28/23, 11:22 AM

ah you are on runpod

Furkan Gözükara SECourses•5/28/23, 11:22 AM

dont use xformers

AlaBeat•5/28/23, 11:26 AM

i tried once with xformers installed and it worked, on runpod... will try a new pod without installing xformers

AlaBeat•5/28/23, 11:27 AM

do i do pip uninstall xformers on the new runpod too?

AlaBeat•5/28/23, 11:30 AM

when using this current runpod, not the new one, i get this thing (not error) WARNING:xformers:WARNING[XFORMERS]: xFormers can't load C++/CUDA extensions. xFormers was built for:
PyTorch 2.0.1+cu118 with CUDA 1108 (you have 1.12.1+cu116)
when not using xformers i get oom errors with 3090...

AlaBeat•5/28/23, 11:30 AM

that was why i want to use xformers

AlaBeat•5/28/23, 11:31 AM

oh well.. fuck it no more runpod for me

ashley•5/28/23, 11:34 AM

3090 has 24GB of VRAM so its an issue with your settings, you shouldn't face OOM with 24GB VRAM

ashley•5/28/23, 11:35 AM

Also fix your xformers version

AlaBeat•5/28/23, 11:35 AM

settings where the same as my last session on runpod using xformers... something is wrong with runpod giving me all kinds of erros when i try to use xformers

AlaBeat•5/28/23, 11:35 AM

when i try to not use xformers i get oom on even batch size 2

AlaBeat•5/28/23, 11:36 AM

i'll just train on my pc until they fix xformers

ashley•5/28/23, 11:36 AM

Did you do this?

pip3 install torch==1.13.1 torchvision torchaudio --index-url https://download.pytorch.org/whl/cu117
pip3 uninstall xformers
pip3 install https://huggingface.co/MonsterMMORPG/SECourses/resolve/main/xformers-0.0.19-cp310-cp310-manylinux2014_x86_6

pip3 install torch==1.13.1 torchvision torchaudio --index-url https://download.pytorch.org/whl/cu117
pip3 uninstall xformers
pip3 install https://huggingface.co/MonsterMMORPG/SECourses/resolve/main/xformers-0.0.19-cp310-cp310-manylinux2014_x86_6

AlaBeat•5/28/23, 11:37 AM

i've only done this:
git clone https://github.com/bmaltais/kohya_ss.git

cd kohya_ss

python3 -m venv venv

source venv/bin/activate

./setup.sh -n
source venv/bin/activate

apt update

apt-get install python3.10-tk

pip3 install torch torchvision torchaudio --index-url https://download.pytorch.org/whl/cu118
pip uninstall xformers
pip install xformers

GitHub

GitHub - bmaltais/kohya_ss

Contribute to bmaltais/kohya_ss development by creating an account on GitHub.

AAlaBeat i've only done this: git clone https://github.com/bmaltais/kohya_ss.git cd kohy...

Furkan Gözükara SECourses•5/28/23, 11:40 AM

this will change your torch version : pip install xformers

Furkan Gözükara SECourses•5/28/23, 11:40 AM

i think just uninstall xformers and dont reinstall

pip3 install torch==1.13.1 torchvision torchaudio --index-url https://download.pytorch.org/whl/cu117 pip3 uninstall xformers pip3 install https://huggingface.co/MonsterMMORPG/SECourses/resolve/main/xformers-0.0.19-cp310-cp310-manylinux2014_x86_6

Hi Dr. Furkan and everyone, how did you solve the problem of XYZ producing the same images for all m

Similar Threads