10K OHM Linear Taper Rotary Potentiometer B10K Pot with Knob and 3-Pin JST-XH2.54 Connector Lead(Pac

10K OHM Linear Taper Rotary Potentiometer B10K Pot with Knob and 3-Pin JST-XH2.54 Connector Lead(Pack of 2) https://a.co/d/6aXXWya

10K OHM Linear Taper Rotary Potentiometer B10K Pot with Knob and 3-...

Linear Track Variable Resistor Potentiometer with tuning Knob and 20cm Flying lead with XH2.54-3P connector Track Resistance:10K Track Taper: Linear No. of Turns: 1 Shaft Diameter: 6mm Wire: 20CM Terminal model: XH2.54-3P Shaft Length - Metric: 15mm Resistance Tolerance: ± 20% Power Rating: 500mW...

RReed 10K OHM Linear Taper Rotary Potentiometer B10K Pot with Knob and 3-Pin JST-XH2.5...

LeLv30_Superbus•7/18/23, 5:17 PM

The thread is hidden by the cap in both pictures but it looks short to my eye. They've blurred the bottom but it looks like the one I have (BI P160KN9G) and that is too short for Rhino. The panel is 9 mm thick so you need ~ 12 mm of thread to get through and be able to tighten it down. I'm going to add a second pot myself, I'll let you know if I find a good one that is easy to install.

LLeLv30_Superbus The thread is hidden by the cap in both pictures but it looks short to my eye. T...

ReedOP•7/18/23, 5:18 PM

Please do. Thank you

LeLv30_Superbus•7/18/23, 5:30 PM

oh no my local store doesn't have anything for panels thicker than 6 mm. Next I'd open up the Rhino and see what kind of pot Walmis used. I bet he didn't install it the easy way. Going that way any common cheap 10k pot would suffice.

LeLv30_Superbus•7/18/23, 5:43 PM

Dudeman's video shows it. The pot is sunk in. It's not 9 mm but maybe 5 mm and this way you can use most cheap pots. I've sunk stuff like this, it's not hard but you do need a suitable drill bit.

LeLv30_Superbus•7/18/23, 5:45 PM

Or am I seeing things? What do you think?

walmis•7/18/23, 6:22 PM

The pot mounting is pocketed, since the material is too thick for standard pots. It's 8mm.

walmis•7/18/23, 6:22 PM

PXL_20230718_181724_LMC8.4_Redmi_Note_11_Pro_5G.jpg

LeLv30_Superbus•7/18/23, 6:27 PM

JST XH connector with 2.54 spacing right?

walmis•7/18/23, 6:28 PM

Yep

BBearclaw Will do. I tried calling them already but kept getting shuffled around and ran o...

Bearclaw•7/19/23, 6:10 PM

FedEx: "Your shipper needs to send a specialized statement for it to clear customs" Me: "I understand that, and the shipper is waiting to hear what that statement is. If you tell me what it is, I can tell him what it is. We're both motivated to get me this package." FedEX: "They need to submit a specialized statement." Me: "What does the statement need to say?" FedEX: "It needs to be a specialized statement." Me: "You keep saying that like it's informative... do you hear that it tells me absolutely nothing about what the statement... I'm sorry, SPECIALIZED statement... needs to say?" FedEX: "your shipper needs to submit a speciali----" Me: "Ohhhhhhh.... a SPECIALIZED statement... why didn't you say so in the first place?" FedEX: "Yes, sir. They need to send that. Please hold after the call for a brief Customer Service Survey." This was, of course, after spending 10 minutes navigating their automated phone support tree. For the life of me, I don't understand how they stay in business. So, @walmis , you may be getting a call or email from FedEX with their requirements for the contents of this alleged "specialized statement". I appreciate your help in this. _Erik

Jon (Bounty_V)•7/19/23, 6:25 PM

That is awful.

Jon (Bounty_V)•7/19/23, 6:25 PM

for anyone else looking to ship soon, walmis does offer DHL which also uses their own location for customs (at least in USA idk about other countries)

Vulcan•7/19/23, 6:30 PM

Walmis probably got put on the naughty list ever since he got flagged for importing rhino parts!

walmis•7/19/23, 6:32 PM

Fedex shipments usually go pretty smoothly, but occasionally there are some hiccups with customs. I'll see what I can do from my end tomorrow.

walmis•7/19/23, 6:33 PM

DHL is like double the price of fedex though

kingjamez•7/19/23, 6:35 PM

*off topic but we are lucky to have somewhat reasonable prices from Lithuania out... (at least to the U.S.A.). I tried to ship a laptop via Fedex to Vilnius last week. They wanted $540 WITHOUT insurance. That was the slowest option too.

kingjamez•7/19/23, 6:35 PM

It was literally cheaper to buy an airplane ticket.

Jon (Bounty_V)•7/19/23, 6:54 PM

oof it has changed to double? rip

BBearclaw FedEx: "Your shipper needs to send a specialized statement for it to clear custo...

walmis•7/20/23, 12:34 PM

Your package should be released today:)

Phantom•7/20/23, 1:05 PM

I have changed the grip type to winwing and plugged in my adapter but it doesn't seem to pick up the grip that is plugged in, I tried applying, store, unplug USB, plug back in, power up etc, but not seeing a result ?

Phantom•7/20/23, 1:06 PM

anything else I should be doing to swap over ?

Phantom•7/20/23, 1:06 PM

I have previously used my Virpil and Thrustmaster grips without issue ?

Phantom•7/20/23, 1:09 PM

For reference I am trying to use the F16-EX grip, if that makes a difference

walmis•7/20/23, 1:13 PM

Can you change the grip type to Generic (Debug) and grab a screenshot of the Debug tab messages window while it's plugged in?

Phantom•7/20/23, 2:04 PM

do I need to change to that, then power off, close program, restart etc before taking that pic mate ?

Phantom•7/20/23, 2:05 PM

walmis•7/20/23, 2:05 PM

nope, no need, just change the grip type

Phantom•7/20/23, 2:05 PM

this is how it is in the mean time

walmis•7/20/23, 2:05 PM

looks like the rhino can read the adapter

walmis•7/20/23, 2:06 PM

so the WW <-> adapter connection is not working for some reason

Phantom•7/20/23, 2:06 PM

ok, I will check the EX connection in case its shorting the grip electrics inside or something ?

Phantom•7/20/23, 2:06 PM

the EX has that little addon bit you bolt on the side, then plug in an extra cable

Phantom•7/20/23, 2:07 PM

its possible its nipped the wire as I tightened the extension maybe

walmis•7/20/23, 2:07 PM

Do you have a WW base to test it?

Phantom•7/20/23, 2:07 PM

sadly not mate

walmis•7/20/23, 2:09 PM

Does the WW grip connector have a good mate with the adapter? I've found sometimes you need to push it a bit for it to make proper contact

Phantom•7/20/23, 2:10 PM

seems to slide into the adapter without undue resistance tbh

Phantom•7/20/23, 2:10 PM

smoothly

Phantom•7/20/23, 2:13 PM

beyond the pins does the adapter do something electronically mate ??

Phantom•7/20/23, 2:14 PM

or could I bypass the adapter with an extended thrustmaster lead extender direct to the WW grip ?

Phantom•7/20/23, 2:17 PM

ok I think I have some life here, but only I really push the adapter into the WW connection overly firmly

Phantom•7/20/23, 2:18 PM

I can see button 1 and 7 illuminates if I really push the connections together manually really super firmly

Phantom•7/20/23, 2:18 PM

which is the most life I have seen from it, seen nothing prior

walmis•7/20/23, 2:21 PM

Yeah, there's a microcontroller inside.

Phantom•7/20/23, 2:22 PM

seems possible the socket isn't making a firm contact with "something" ??

Phantom•7/20/23, 2:23 PM

could it be the earth shield ? ring around the outside of the socket might benefit being crimped ever so slightly under pressure ?? the socket is quite loose compared to the others ?

Phantom•7/20/23, 2:23 PM

I don't mean going ham fisted, just a gentle squeeze to tighten connection ?

walmis•7/20/23, 2:24 PM

nah, that is unused, only 3 pins are used on the connector

Phantom•7/20/23, 2:24 PM

hmm - IDK then, it seems to work if you push the 2 parts together really firmly ?

walmis•7/20/23, 2:24 PM

Well, trying here, I need to push it pretty tight with a little nudging to the sides to make it fully seated

10K OHM Linear Taper Rotary Potentiometer B10K Pot with Knob and 3-Pin JST-XH2.54 Connector Lead(Pac

Similar Threads