Just a default safety margin, you can increase it
Just a default safety margin, you can increase it
Jwow the new defaults are way better than what I had
Jthink I discovered why
JSo I think it was my axis scaling being off
JThat's asking the point of the physical axis where 100% logical is reported, not taking the endstop into account
JI had the values in relative to the endstop. But now that I've solved that issue I'm getting oscilation when I hit the endstops, any tips on easing that? lower spring frequency?
Jdecided my solution is going to be print those deflection adapters
JWow yeah cleaning up my settings combined with the telemetry app and it's like Rhino 2.0
RWhat and why the default setting updates ?
JDefaults didn't use to have good values already built in for a lot of the effects
Jlike I was never able to get the balance spring working right, but the defaults work great
RAhh
JMy settings were built from a defaults file that was very old
Jalso it looks like the frequency settings for a lot of the effects are higher, which I'm guessing is they were very conservative at first and got tweaked up as things were made/confirmed stable
RI see
LHello, is it possible to get the Rhino to treat the TM hornet grip trimmer switch as a HAT switch instead of buttons?
Ais 15hz a new recommendation for spring filter? in the app you recommend a max of 12hz
LAnyone have any thoughts on how I can get rid of this play in the pitch axis where the grip (or extension) attaches to the base? It seems as though the mating face on the base has a hump on it, but when I check it with a straight edge it seems fine. Neither the grip nor extension have this play when I connect them to my Virpil base. Oh and if I turn the extension 90° (can’t with the grip because of the rigid connector) the play is still in the y-axis.
AIf you unscrew the square ring around the base of the leather, you can lift it up and check the tightness on the bolts on the alu stem
LThanks, I’ll check it, but it seems like the movement occurs above that. The connection between the aluminum stem and mounting adapter feels solid. But, maybe I just can’t create enough leverage without the stick attached.
LI guess it was that joint after all! Seems to be much better now (after tightening the screws) but I took the opportunity to print some throw limiters while the dust boot is off so I’ll test properly when they’re done.
LSadly I damaged my TM Hornet grip in the process of taking it off and putting it back on so many times troubleshooting. I broke the center alignment post of the DIN connector and bent all the pins 
. Managed to straighten them back up and everything seems to be working fine again. Is that a standard part I can get somewhere to be proactive in case it fails in the future?
. Managed to straighten them back up and everything seems to be working fine again. Is that a standard part I can get somewhere to be proactive in case it fails in the future?
KIt's a standard part called "DIN 5P". Some folks modify old keyboard DIN 6P connectors to work, but I just buy the real thing. You can find them on digikey in many forms. Here is one https://www.digikey.com/en/products/detail/cui-devices/MD-50/96914
SDigikey ftw!
PHow do I prevent this springy-ness? It wasn’t happening until I applied my throw limiter and re calibrated
NI dont know if I know the answer, but your screenshot only tells half the story... also need to see the Effects tab (I highly doubt you have all your settings maxed). The effect settings in "Effects" and the sliders in "Settings" work together (or, rather, they limit eachother)
POnly the sprint box is checked on effects, I have never touched that page prior
Aif you want to get rid of springiness, try playing with damper settings in effects
RTurn damper up to 20-30 as a start. That will go away.
RI run 65 spring and 35 damper.
Sgot a thrustmaster stick and finall got it installed... but stick doesn't show up in windows game controllers list or DCS 
Sany one has any ideas?
Supdate: uninstalled a bunch of drivers, uninstalled hidhide (but it wasn't active), restarted computer
Sunclear which one did the trick but it shows up now!
Sthis. is. amazing. just had my first flight in the A-10. feels like a new jet. don't think i can go back
S@.spanner you have crossed over....welcome!
JDon't forget the telemFFB!
JYou gotta download it.
SI almost want to buy the A-10 to feel the BRRRT
Jtheres always the free 2 week trial
MOr the fc3 one, which has the brrrt for cheaper, just doesn't have as many weapons or systems
Dthe A-10 DLC is very worth it
PI did the trial for the a10c to feel the power of the brrt with 100% gun effect! Made a tiktok about it as well
SSweet, found and followed your TikTok
Dhoping someone can help... Ive just unzipped configurator to reinstall on my new PC and get a message saying an app needs to be installed to run it..... can anyone tell me what I need....It is a new pc with very little on it so may not have the usual expected softwares.... but i dont want to keep guessing and fill the sim pc with junk!
KIs this window a prompt to unzip or have you already unzipped?
WYeah, that doesn't make sense, the exe should straight out run. Maybe it's trying to install an archive utility.
Dalready unzipped into downloads folder....also tried it into a seperate folder.....should I be unzipping into a program folder?
D.I thought I had grabbed the most upto date from your links... But I'll check
Djust checked...is v 1.0.14 from march 23
KWhat file are you clicking on that brings up this prompt?