BCan I do the initial configuration and firmware update, on a Mac M2 pro running Windows 11 via Parallels ?
Thought il do the initial setup and checks on my laptop possibly with MSFS
Thought il do the initial setup and checks on my laptop possibly with MSFS
WShould work via USB passthrough
BUsb C to usb 3.0 hubs ! Hope you were referring to that
WAh nvm, thought you were using a Virtual Machine
LFW upgrade succeeded but X and Y don't respond. I tried calibrating but blue dot doesn't move in configurator. 
WPower is off perhaps?
LThese change when I move stick around. Green led inside Rhino is on. Spring knob makes it beep.
LI mean dx and dy change. X and Y don't.
Wcan you show full config?
L
Wand effects tab?
LI noticed something else: when I calibrate X & Y change first but after a second or two they stay the same
L
Wtry turning off axis scaling
LI hit RESET CONFIG and it helped
L(Well that turns scaling off too)
LBut if I turn axis scaling back on the problem returns
LAnd turning it off fixes it
LSo it is axis scaling right?
Wtry setting it to something other than 16%
LI think everything works now, thanks Walmis 
MYeah, I'll do that after I get home tonight
AStill having the same issue, no periodic effects seem to be coming through
AOr rather, I'm having to dial them up to the max to get anything. Same goes for the Apache, so it's not on the Gazelle's end.
Aight, it's gotta be profile side, something I've screwed up. Loaded default profile, that works
Aight, it's gotta be profile side, something I've screwed up. Loaded default profile, that works
Swith 1.0.15 it doesnt remember my pot#2 selection of damper gain, it always comes back as disabled.
Sset damper gain, apply, store, quit, relaunch and it's disabled.
Sbut the knob still beeps and the function seems to work
A@walmis @Number481 narrowed it down, Periodic Effects LPF was set to 1 Hz instead of 20. 20 is the correct/appropriate value, correct?
NI don’t actually know, but mine is at 20Hz and that value would have came from the default profile that is in the configurator install location.
NI’ve never intentionally modified any of those values.
AYeah, that's what I reacted to
AI don't know how 1 Hz made it in there, it's nothing I ever did (intentionally).
Oh well, all's good that ends well. Thanks for the help/sorry for the nonsense!
Oh well, all's good that ends well. Thanks for the help/sorry for the nonsense!
NWe all learn something whenever someone has an issue!
WPeriodic effects LPF! Set that to 20-30Hz and you're golden.
SFlight stick grip extension kit. All light and strong anodized aluminum material (both tubes and adapters). Grip Extension kit includes various extensions: 70mm, 105mm, 150mm. Total length adjustment with adapters: 70mm (2.75 in.) to 190mm (7.5 in.) Included in the kit: three extensions, female/m...
Sturns out the solution is I need to shift the tubes lower before screwing on the adapter to create friction
SWhy when i press the TRIMM button on helicopters the cylic moves instead of stay stable? Anyone faced this problem?
SLast time i inverted the axis into game and it was causing problems....Now that i do not have the option again i have the same problem
SIf i keep pressing the "TRIMM" button the cyclic goes crazy and it is moving
NI dont understand. I assume you're talking DCS? What module?
Sdcs heuy and MI8
Nwhat do you have the trim mode set to in special settings for the module(s) in DCS?
Sit does this to all helicopters
Sinstant trim
Sor default
Nneeds to be default.. all other options are meant for non-ffb or sprung joysticks
SMi24
Sheuy
Sapache
