[19:09:24.671] FF FF FF FF FF FF FF FF 04 00 00 00 00 00 00 00 [19:09:24.871] FF FF FF FF FF FF FF

[19:09:24.671] FF FF FF FF FF FF FF FF 04 00 00 00 00 00 00 00
[19:09:24.871] FF FF FF FF FF FF FF FF 04 00 00 00 00 00 00 00
[19:09:25.073] FF FF FF FF FF FF FF FF 04 00 00 00 00 00 00 00
[19:09:25.274] FF FF FF FF FF FF FF FF 04 00 00 00 00 00 00 00
[19:09:25.476] FF FF FF FF FF FF FF FD 04 00 00 00 00 00 00 00
[19:09:25.677] FF FF FF FF FF FF FF FF 04 00 00 00 00 00 00 00
[19:09:25.878] FF FF FF FF FF FF FF FF 04 00 00 00 00 00 00 00
[19:09:26.078] FF FF FF FF FF FF FF FF 04 00 00 00 00 00 00 00
[19:09:26.279] FF FF FF FF FF FF FF FB 04 00 00 00 00 00 00 00
[19:09:26.481] FF FF FF FF FF FF FF FF 04 00 00 00 00 00 00 00
[19:09:26.682] FF FF FF FF FF FF FF F7 04 00 00 00 00 00 00 00
[19:09:26.883] FF FF FF FF FF FF FF FF 04 00 00 00 00 00 00 00
[19:09:27.084] FF FF FF FF FF FF FF FF 04 00 00 00 00 00 00 00
[19:09:27.286] FF FF FF FF FF FF FF FF 04 00 00 00 00 00 00 00\

JIGGAwest•8/17/23, 1:10 AM

So the pot is the black dial on top of the base correct? How do you activate function #2? is the pot supposed to click or lift up to a second position?

MashedPotatoOP•8/17/23, 1:11 AM

The FF runs the screen constantly, the FD, FB, and F7 are the 3 button presses that are not otherwise captured

JJIGGAwest So the pot is the black dial on top of the base correct? How do you activate fun...

MashedPotatoOP•8/17/23, 1:11 AM

Function #2 is tied to a second pot. I don't believe the Rhino ships with one, but the controller board is wired for one

MashedPotatoOP•8/17/23, 3:43 AM

Do I need to do anything besides run the app to get telemffb running with DCS? It doesn't seem to want to send vibrations to the stick

JIGGAwest•8/17/23, 3:47 AM

no connect error when you open TelemFFB ? periodic effects is turned up?

MashedPotatoOP•8/17/23, 4:42 AM

No error. Honestly not sure periodic were turned on, wasn't sure what that was, I'll check it out in the am

MMashedPotato [19:09:24.671] FF FF FF FF FF FF FF FF 04 00 00 00 00 00 00 00 [19:09:24.871] ...

walmis•8/17/23, 8:02 AM

I'll add this to the next maintentace firmware release

NNumber481 you said your axis is not inverted.. but what about FFB tune settings?

LeLv30_Superbus•8/17/23, 10:25 AM

whaaaat didn't know that menu exists, is it module specific?

Wwalmis I'll add this to the next maintentace firmware release

MashedPotatoOP•8/17/23, 12:37 PM

Sweet, I'll let you know if it wakes up those buttons

LLeLv30_Superbus 😮 whaaaat didn't know that menu exists, is it module specific?

Number481•8/17/23, 12:48 PM

It is.. I have the built-in shake effects disabled on the Spitfire, using TelemFFB in stead. You can see it in the joystick profile if you change from defaults.

Number481•8/17/23, 12:49 PM

I never knew it existed either because I always have "foldable view" enabled which removes all the options buttons at the bottom of the screen

Number481•8/17/23, 12:50 PM

TheZoq2•8/17/23, 5:26 PM

Has anyone with a viripl mongoose grip on the rhino experienced this? Just lightly tapping the brake lever makes the value spike a bunch?

TheZoq2•8/17/23, 5:28 PM

My guess is that this is a hardware issue in the grip

TTheZoq2 My guess is that this is a hardware issue in the grip

Number481•8/17/23, 5:31 PM

are you using the virpil offset extension by chance?

TheZoq2•8/17/23, 5:31 PM

I am

Number481•8/17/23, 5:31 PM

have you tried with the grip directly attached to the rhino?

TheZoq2•8/17/23, 5:32 PM

I have not, but that is a good idea

Number481•8/17/23, 5:33 PM

I ask because myself and several others have had flaky wiring in the virpil extension.. I took mine apart and replaced the wire, but it was kind of a PITA honestly..

TheZoq2•8/17/23, 5:35 PM

Nope, same effect

Number481•8/17/23, 5:36 PM

ahh.. well, that good its not the extension but bad its either the grip or the rhino

TheZoq2•8/17/23, 5:37 PM

Yeah

TTheZoq2 Yeah

walmis•8/17/23, 5:42 PM

Did you calibrate the brake axis in the configurator?

TheZoq2•8/17/23, 5:43 PM

I did yep

walmis•8/17/23, 5:43 PM

On a second though yeah, it looks like a hardware issue in grip

TheZoq2•8/17/23, 5:43 PM

I guess I'll have to send an email to vipril then

walmis•8/17/23, 5:44 PM

You can manually calibrate it out though

TheZoq2•8/17/23, 5:44 PM

with a deadzone?

walmis•8/17/23, 5:45 PM

Increase the min value so the glitchy part is below zero

TheZoq2•8/17/23, 5:46 PM

I suppose so yeah, though it seems to be glitchy across half the range

TheZoq2•8/17/23, 5:51 PM

Well, only slightly glitchy above 25% range, so this should be usable until I get around to complaining heheh

TheZoq2•8/17/23, 5:51 PM

Thanks for the help

keirn•8/17/23, 6:30 PM

Hi, think I might have broken my base..
I hooked it up, when powered on it wanted to center , and more so when tuning the knob. tried to calibrate in the calibrator app, but it will not "do" anything i msfs, the force feedback worked for a bit , but then

keirn•8/17/23, 6:31 PM

it just stopped doing anything, it is limp.

keirn•8/17/23, 6:32 PM

I cloned the git repo, it is receiving telemetry from msfs just fine, so that part is working

keirn•8/17/23, 6:32 PM

I'm a sad puppy

amadeus•8/17/23, 6:33 PM

Can you post screenshots of your configurator settings?

keirn•8/17/23, 6:33 PM

moment

amadeus•8/17/23, 6:34 PM

From a debug perspective — we should focus on the device first to make sure it’s working properly, then secondary focus on the telem app and msfs, since very different situations

amadeus•8/17/23, 6:35 PM

And just for a general gut check — the emergency button isn’t pressed in right? The red one. You have to rotate to pop it in the up position

keirn•8/17/23, 6:35 PM

keirn•8/17/23, 6:35 PM

yes, you are probably right

keirn•8/17/23, 6:36 PM

it is not pressed, correct

amadeus•8/17/23, 6:36 PM

When you move the stick, do you see anything on the left side move?

keirn•8/17/23, 6:36 PM

yes

amadeus•8/17/23, 6:37 PM

Ok cool

amadeus•8/17/23, 6:37 PM

So all those sliders — should be at 100%, except leave periodic effects at 50%, and maybe set Friction to 7%

walmis•8/17/23, 6:38 PM

Settings look like they were reset to board defaults

keirn•8/17/23, 6:38 PM

aha, yes, something sure happened now

[19:09:24.671] FF FF FF FF FF FF FF FF 04 00 00 00 00 00 00 00 [19:09:24.871] FF FF FF FF FF FF FF

Similar Threads