Hey guys, just a quick question. Would it be possible to use the rhino with a selfmade 3d printed st
Hey guys, just a quick question. Would it be possible to use the rhino with a selfmade 3d printed stick?
AI don't see why not
EI am worried about the connection a bit (sorry, really a noob with that stuff). So i would need an adapter with the wires coming from the stick connected to the adapter, correct?
Ait's essentially a normal thrustmaster connector so if your stick connects to a regular tm base, it should work with a rhino
Aor a virpil connection, which is very similar
BMy VP Force number can't come quick enough. My Brunner overheats way too easily.
ENot at the moment. It's not even build yet. I was just thinking of building my own stick when the rhino ships. But this should be possible to do i guess if i can get hold of the connectors somehow.
BTM uses a pretty stock 5 pin mini din connector, worst case you get them from aliexpress etc.
Anote that if you build a completely rigid connection like thrustmaster does, you won't be able to rotate the stick, which is usually not ideal
EGood point! You mean for ergonomical reasons? I can possibly find a solution for that. The question is more how does the rhino recognize my buttons and switches with the 5 pin mini din. But this will get off topic. I surely have to do some more research on this project. Thanks a lot for your help so far!
BThere is also some circuitry and shift registers involved.
Dont really know more than whats in this post since I havent had much chance for diy.
https://www.reddit.com/r/hoggit/comments/45j5pk/tm_warthog_stick_circuitry/
Dont really know more than whats in this post since I havent had much chance for diy.
https://www.reddit.com/r/hoggit/comments/45j5pk/tm_warthog_stick_circuitry/
Reddit
Explore this post and more from the hoggit community
FI have a question regarding building a sim rig. I have bought a set of hikig desk mounts and am in the process of designing an alu sim rig. I was hoping to reuse the flanges that connect my sticks to the extrusion, but I have noticed that the 20x60 profile I have seems to have an 8 slot, while the 2060 profiles I can find online have a 5 slot instead. Are there different versions of the profile or am I measuring incorrectly?
T@walmisHow many total orders do you have now and what are you up to now on deliveries? I am trying to decide if I should order one and if I will live long enough to receive it...This is not a dig or a joke...I am a 63 yr old man in poor health and there is no guarantee that I will live long enough to get one even if I order now.
FIf you would like to have one soonish I'd suggest looking into diy'ing or having someone do that for you, lead time is around 8 months to a year iirc
FWalmis can send you a pcb and motors and you'll have to figure out the psu and gimbal, there are a few examples in #
showcase
showcaseT@fierce_fireI am aware of this but I do not have access to tools needed to DIY it. I live in an urban Apt. with no access to tools or workshop but thanks for the suggestion. Unless I can find someone to do the hardware then I might consider a diy motor kit but can't do the work myself.
FI also dont have any cnc equipment or anything but I believe some shops might be able to machine/lasercut parts for you and all you'd need to do is assemble it
TThanks again...Maybe someone out there can give me more details on having that work done with ordering details...I have seen the many designs that people are making and like most of them.
PRhino will work with diy grips, use a shift register. Walmis might even sell them not sure on that though
TYeah only issue, from what I saw on the "Honey" thread over on DCS forums, is that an adapter made out of weak material might result in higher (than wanted) deflection (?).
EThank you for getting back to this topic. I am still in the reading/watching tutorials process but as far as i understand i could use a arduino micro inside the stick and connect that to a 5 pin mini din (i might be awefully wrong here though). I'll have a look into shift registers now.
Swalmis sells a nice little shift register board, no arduino needed
PI though he sold them
EAwesome! Thanks guys!
Pno worries m8
TThe good thing is that you don't pay until you're a few weeks from delivery, so you can sign up now and decide later
J!status
VHey @jc523,
So the last Shipped RHINO is #0187 on 2023-09-08
Average waiting time from preorder to shipped is 203 days, median is 216 days, max is 292 days
185 Rhinos are shipped in total
So the last Shipped RHINO is #0187 on 2023-09-08
Average waiting time from preorder to shipped is 203 days, median is 216 days, max is 292 days
185 Rhinos are shipped in total
T@jc523 I am familiar with this bot but it does NOT tell me the total number of orders so far....I would rather make my own estimates rather than rely on the bots estimate....thx anyway
BIt will tell your number and how many are ahead of you.
BOnce you sign into the queue that is.
JYou could just put yourself in line. I jumped a few spaces because those that got in before me, one way or another, did not have their orders filled. It’s been said the average per month is about 24. So, when you put your name down, take your assigned S/N, subtract the number the bot says it’s currently on, divide that by 24, that’s how many months you’ll likely have to wait.
BThe bot simply tells you how many are left before you, and updates as units ship and others drop off.
Simply ping the bot and divide the remaining number with a guesstimate of units delivered monthly.
Simply ping the bot and divide the remaining number with a guesstimate of units delivered monthly.
DTo give an idea of how many people drop once it's time to actually pay, my order number was 315, origianal SN given was 285. I am now paid and 4 units away with SN 191.
TJust paid mine but got invoice 3 days ago, was "8.25" months for me, my original number was pretty high as well but 100-150 people somehow didn't want one anymore so now I'm SN 188.
JYeah I was like 120 something originally and got in the mid 90s for my actual unit
TYeah only 8 months'ish of waiting, I've waited a whole lot longer for a whole lot less, the MSFFB2 kept me in the loop just fine for years anyway.
BBeing able to afford it when time comes is certainly a concern for me.
But my thinking is worst case this thing is so special I'll scalp it to a local flightsimmer if I really need the money.
But my thinking is worst case this thing is so special I'll scalp it to a local flightsimmer if I really need the money.
BI was #496, currently #423
BAnd that's falloff, not from units delivered, actual units ahead of me is 236 atm.
JSave a bit each month and should be gucci
AI filled out a google form to get on the waitlist for a base and I haven't heard back. Who can I reach out to to learn more about the waitlist?
J#
faq also check spam folder.
https://discord.com/channels/965234441511383080/986474224241741884/1048909362028093450 dm the bot to check status
faq also check spam folder. https://discord.com/channels/965234441511383080/986474224241741884/1048909362028093450 dm the bot to check status
Fyou won't until it's ready to ship.
MAnyone know if the TM warthog works? I understand it fits virpl bases.
Myes, all the buttons work just fine
HYou should have gotten an email from Google Forms labeled "VPforce RHINO Preorder", look inside that to see the form you filled out. Then maybe in 18hrs or so you can check the VPforceBot and type in "!info my.email@gmail.com" etc to see the response, it will show your order number reservation date and serial number assigned. You will be contacted I believe when yours is close to being built, i.e. pay for it, and confirm shipping info I'm guessing.
V:package: 
RHINO #0188 Has Shipped!
RHINO #0188 Has Shipped!V:package: 
RHINO #0189 Has Shipped!
RHINO #0189 Has Shipped!V:package: RHINO #0190 Has Shipped!
RHINO #0190 Has Shipped!