is this some kind of "if you have to ask for the price you can't afford it" deals?
is this some kind of "if you have to ask for the price you can't afford it" deals?
J? Just look at their twitter feed. Isn't even up for pre order yet. Just reservations. Isn't close enough to release yet.
Fsure but you should at least know the range of the costs before you reserve a spot imo
JLiterally no money down. No obligation to anything.
Jthey're first and foremost a VR social platform
JAlso, the headset itself is open source 3d printed. You can buy just the important bits from them, such as pcb, lenses etc. pre built, and print the rest yourself
JThe reservations are for fully finished kits.
BI am runnning my apparently obsolete Reverb G2 on an RTX2060 Super, if you can believe it. Most of the time it's fine in MSFS with medium settings, and DCS is no problem (but then I don't do multiplayer much so that probably makes a difference).
LIs there any channel or wiki here that contain recomended settings per dcs aircraft module ?
Fknowledge-base?
PAm I correct in my interpretation of the official Rhino diagram pdf that the dimensions of a mounting plate that would fit perfectly under the unit would be 180mm x 180.32mm?
OTIL my headset is "obsolete"
V:package: 
RHINO #0212 Has Shipped!
RHINO #0212 Has Shipped!V:package: 
RHINO #0213 Has Shipped!
RHINO #0213 Has Shipped!
DOnce you get the FOV mod I'd say it's still pretty much one of the best. The clarity on the Reverb is just superb. I've seen some comparisons to some Pico headsets that have a higher resolution but the clarity is quite a bit worse so you don't gain anything and you'd lose some FPS
G!status
VHey @geezalbert,
So the last Shipped RHINO is #0212 on 2023-10-10
Average waiting time from preorder to shipped is 206 days, median is 219 days, max is 292 days
211 Rhinos are shipped in total
So the last Shipped RHINO is #0212 on 2023-10-10
Average waiting time from preorder to shipped is 206 days, median is 219 days, max is 292 days
211 Rhinos are shipped in total
WYep, that's correct
V:package: 
RHINO #0214 Has Shipped!
RHINO #0214 Has Shipped!G!status
VHey @geezalbert,
So the last Shipped RHINO is #0214 on 2023-10-11
Average waiting time from preorder to shipped is 206 days, median is 220 days, max is 292 days
212 Rhinos are shipped in total
So the last Shipped RHINO is #0214 on 2023-10-11
Average waiting time from preorder to shipped is 206 days, median is 220 days, max is 292 days
212 Rhinos are shipped in total
GHello I’m wondering if anybody is selling their design using the diy motor kit
PHey m8 I can't say for sure but I haven't seen anyone asking money for the diy design plans/files, though I think ppl were working on offering diy kits to go with the motor kits from vpforce. Check out #
showcase & #
diy-builds for the ppl that have made their own & ask if they have plans/files.
showcase & #diy-builds for the ppl that have made their own & ask if they have plans/files.V:package: 
RHINO #0215 Has Shipped!
RHINO #0215 Has Shipped!V:package: 
RHINO #0216 Has Shipped!
RHINO #0216 Has Shipped!
GThanks man
TAnother Kiwi !
FWhat is that extention made of? Is it a custom or a readily available part?
F@walmis I read that the VKB adapter has 6 set screws to connect it to a DIY extension solution, is this correct and if so, where would they be located? And also, if one were to use tubes to mount the adapter, what would be a recommended inner diameter for these? Thanks.
Rfrom ebay. its al.
FAny idea what it might be called?
FHmm I think i found it
Fthank you
NWhat @PiNKMuD said but there are designs pinned in this Discord in the diy-builds channel. Links to the necessary files point to Github repositories. There you can find the link to pull it all down as a zip file.
@Subsonic (Protomaker) posted this one: https://github.com/protomaker964/Rhino-FFB-Clone-3D_Printed/tree/main
And @Number481 posted this about adding force feedback to pedals: https://github.com/Number481/VirpilACE-VPForce-Mod
@Subsonic (Protomaker) - How is your 3D printed version holding up? Nice looking work!
@Subsonic (Protomaker) posted this one: https://github.com/protomaker964/Rhino-FFB-Clone-3D_Printed/tree/main
And @Number481 posted this about adding force feedback to pedals: https://github.com/Number481/VirpilACE-VPForce-Mod
@Subsonic (Protomaker) - How is your 3D printed version holding up? Nice looking work!
GitHub
3D print files, parts list and instructions to build a DIY version of the Rhino FFB Stick base using the VPForce motor kit - GitHub - protomaker964/Rhino-FFB-Clone-3D_Printed: 3D print files, parts...
GitHub
DIY VPForce 86BLF-03 kit mod for the Virpil ACE rudder pedals - GitHub - Number481/VirpilACE-VPForce-Mod: DIY VPForce 86BLF-03 kit mod for the Virpil ACE rudder pedals
Gthanks! very kind of you
NThe one Subsonic posted looks exactly like the full Rhino but I haven’t really dug into it yet.
Gill have a look
S3d Printed unit is holding up just fine. No creaks or tweaks.
Use Carbon PETG for the gimbal and stick assembly and should work fine and last a long time.
Use Carbon PETG for the gimbal and stick assembly and should work fine and last a long time.
SIt is essentially, with a few minor differences such as the gimbal/stick and fan locations.
NThanks for that, Subsonic! And thanks for posting the files!
SMost welcome...enjoy!
DYeah, there are a few of you 
V:package: RHINO #0217 Has Shipped!
RHINO #0217 Has Shipped!V:package: 
RHINO #0218 Has Shipped!
RHINO #0218 Has Shipped!WI don't really understand what you're asking here 
WVPforce VKB adapter looks like this.
FHow would I attemt to attach this to something? I believe it has threads on the bottom, I could try to 3d print something that fits. Is there another method that was included or was that a solution by a diy'er? Also, what is the outer diameter of the plastic part? Ive found the dia of the metal one but not the plastic. Or do you have a step file I could use?
SIf i put myself on the preorder list i can cancel anytime right? Not 100% yet if i wanna spend this much and 1 year would give me a bit time to think about it
WYeah, sure
WIt has a standard thread M36x2 like Virpil, Thrustmaster, WinWing uses
FThanks, Ill see if I can use that