so from setting a vector and then querying it. e.g. kv is like up to 2 secs like is it 'instantly'

so from setting a vector and then querying it. e.g. kv is like up to 2 secs

like is it 'instantly' queryable after setting

Ccharl.dev so from setting a vector and then querying it. e.g. kv is like up to 2 secs lik...

Matt Silverlock•11/6/23, 7:26 PM

Yes.

SSam Hey guys. Getting this error trying to upload my vectors using the cli: ✘ [ERRO...

Sam•11/7/23, 5:03 PM

Has anyone used pandas or polars with openai to create their embeddings? Created some embeddings and albeit sending the ndjson file the vectors aren't getting inserted. Still getting the error displayed here.

scotto•11/8/23, 12:55 PM

Team has a date for metadata filtering ?

Sscotto Team has a date for metadata filtering ?

Matt Silverlock•11/8/23, 1:13 PM

Within the next few weeks (before end of year)

SSam Has anyone used pandas or polars with openai to create their embeddings? Created...

Matt Silverlock•11/8/23, 1:13 PM

Can you confirm it’s NDJSON (show some sample lines)? How many vectors per file?

MMatt Silverlock Can you confirm it’s NDJSON (show some sample lines)? How many vectors per file?

Sam•11/8/23, 1:40 PM

Yup. NDJSON, 500 vectors for a single file.

SSam Yup. NDJSON, 500 vectors for a single file.

Matt Silverlock•11/8/23, 1:47 PM

That should be fine. Metadata? 100% sure no trailing commas? Names too long?

MMatt Silverlock That should be fine. Metadata? 100% sure no trailing commas? Names too long?

Sam•11/8/23, 1:50 PM

I had multiple versions and none seemed to work. In one I omitted the metadata field, and in the other I included it and both had the same results.

SSam I had multiple versions and none seemed to work. In one I omitted the metadata f...

Matt Silverlock•11/8/23, 1:51 PM

Can you share a sample? Note that the docs have limits on ID length, etc. Without a sample we're just guessing at this point

MMatt Silverlock Can you share a sample? Note that the docs have limits on ID length, etc. Withou...

Sam•11/8/23, 1:56 PM

Sure! Here's the example without the metadata.

embeddings.ndjson18.56MB

SSam Sure! Here's the example without the metadata.

Matt Silverlock•11/8/23, 1:57 PM

embeddingembedding isn't correct. It should be valuesvalues

SSam Sure! Here's the example without the metadata.

Matt Silverlock•11/8/23, 1:57 PM

https://developers.cloudflare.com/vectorize/learning/insert-vectors/

Insert vectors · Vectorize

Vectorize indexes allow you to insert vectors at any point: Vectorize will optimize the index behind the scenes to ensure that vector search remains …

Sam•11/8/23, 2:04 PM

Yeah I also created a version with that and it still didn't work. I can't seem to generate the truncated (500 line ) version of the most recent file I uploaded because OpenAI deprecated their api. But here's the 1000 vector version.

embeddings.ndjson31.34MB

Sam•11/8/23, 2:05 PM

I had a version of that as well and that didn't work. This would be truncated to 500 vectors.

SSam I had a version of that as well and that didn't work. This would be truncated to...

Matt Silverlock•11/8/23, 2:13 PM

Let us take a look.

MMatt Silverlock Let us take a look.

Sam•11/8/23, 3:42 PM

It's the file attached to this latest message.

SSam Yeah I also created a version with that and it still didn't work. I can't seem t...

Matt Silverlock•11/8/23, 6:35 PM

We're pushing a bug fix in a bit: seeing an issue with the REST API (vs. the Workers API) that's preventing insert in some cases. Will reply back once deployed.

Sam•11/8/23, 6:37 PM

Thanks!

SSam Thanks!

Matt Silverlock•11/9/23, 1:10 PM

This should be good now - I can import your file.

MMatt Silverlock This should be good now - I can import your file.

Sam•11/9/23, 1:10 PM

Thanks!

Jerome•11/10/23, 2:40 PM

Hey there! Vectorize has been out a month now. We'd love your feedback if you have some that you haven't shared yet. What's good, what's bad, what could be better, we take it all.

huw•11/13/23, 4:47 AM

A question about metadata filtering—what will be the pros and cons for using the namespaces feature vs defining a namespace in metadata and filtering on that? Query speed?

(I’m looking at building a system that searches across multiple namespaces at once and interleaves their results)

Hhuw A question about metadata filtering—what will be the pros and cons for using the...

Old Man Maker•11/13/23, 10:21 AM

I'm sure Matt will clarify anything I get wrong here, but my Assumption (with a capital A) is that namespaces, much like the way they are implemented in KV for example, are a way for you to separate your vectorize instances entirely - e.g, you are binding to a namespace, and the vectorize instances you have in that namespace are available to query on.

Filtering - the difference would be that your metadata filtering is allowing you to reduce the size and number of vectors you are performing a query over, if that makes sense. I'm not sure if that would impact billing (because you are charged on the number of vector dimensions you query against as well as storage of said vectors) - I'm sure all of this will be announced along with the release of those changes, which hopefully are not too far away.

Jerome•11/13/23, 2:20 PM

@oldmanmeta @huw

namespaces [...] are a way for you to separate your vectorize instances entirely - e.g, you are binding to a namespace, and the vectorize instances you have in that namespace are available to query on.

Jerome•11/13/23, 2:23 PM

spot on; also metadata filtering isn't available yet, so namespace filtering is the only filtering besides vector query we have right now.
Once metadata filtering lands, filtering on namespace and filtering on a namespace property in metadata will be functionally identical, although namespace filtering should induce lower latency due to the fact that we're able to index it in a way that makes it faster overall.

JJerome spot on; also metadata filtering isn't available yet, so namespace filtering is ...

huw•11/13/23, 9:50 PM

Exactly the answer I was looking for, thank you! I think for my use case it’s gonna make sense to use metadata filtering long-term

wadefletch•11/14/23, 5:26 AM

Where are the docs for namespace filtering?

Wwadefletch Where are the docs for namespace filtering?

Matt Silverlock•11/14/23, 1:38 PM

namespaces are part of the TypeScript/JS API; we haven't documented them yet as there was a bug when we initially launched. On our TODO list.

steyblind•11/16/23, 3:58 PM

OK, so I'm play-testing this, and I'm only a few weeks in to working with all this the fun offerings here, so looking for guidance based on what's coming (or not):

Goal:
- multi-tenant RAG CX via Slack
- support alpha concept (2-3 potential customers)

Context:
- I'm all set with workers, queues, data sync, AI gateway, etc.
- sync'ing data from Hubspot, Slack, Gong.io ~2.5k records per customer, maybe? Would expect this to be ~10k-25k+ in a production setting w/long-lived customer. Or more.

Experiment:
- How can Vectorize support this? (rip & replace pinecone)

System Design:
- Vectorize: id: (hex sha1 of text), values: [vector of text], metadata: {text, companyId}id: (hex sha1 of text), values: [vector of text], metadata: {text, companyId}
- D1 (possibly KV instead?): proxy for clerk.com Organization object + maps Slack IDs to users to Companies

Usage (simplified):
utterance from Slack

get company ID

query vectorize for context

return to response builder

bounce off LLM + augmented context

respond to Slack

So now what?
At this point I'm just waiting for filters or namespaces I guess, before this is "usable"?

Tumbzilla•11/16/23, 4:08 PM

Getting the following errors fairly frequently.

VECTOR_QUERY_ERROR (code = 2006)
VECTOR_QUERY_ERROR (code = 1000)

Couldn't find any docs on how to resolve. Anyone know of any docs that might point me in the right direction?

TTumbzilla Getting the following errors fairly frequently. VECTOR_QUERY_ERROR (code = 200...

Matt Silverlock•11/16/23, 5:54 PM

Is this just on a query?

MMatt Silverlock Is this just on a query?

Tumbzilla•11/16/23, 6:15 PM

yep. Just on queries. Roughly 1/3 of my requests are failing this way.

Tumbzilla•11/16/23, 6:16 PM

most of them are the first error code (2006)

TTumbzilla yep. Just on queries. Roughly 1/3 of my requests are failing this way.

Matt Silverlock•11/16/23, 6:17 PM

Can you share your index ID here?

MMatt Silverlock Can you share your index ID here?

Tumbzilla•11/16/23, 6:27 PM

just DM'ed it to you.

Hhuw Here’s what I have 🙂 ```toml vectorize = [ { binding = "embeddings-developmen...

JuanWTF•11/16/23, 10:44 PM

Just to confirm, is this the right way to bind many indexes to a worker?

JJuanWTF Just to confirm, is this the right way to bind many indexes to a worker?

huw•11/16/23, 10:51 PM

Yep!

huw•11/16/23, 10:52 PM

Multiple indices vs multiple namespaces will depend on what you’re trying to achieve

JuanWTF•11/16/23, 10:59 PM

What would be multiple namespace in this context?

MMatt Silverlock Can you share your index ID here?

Tumbzilla•11/17/23, 2:10 PM

hey @Matt - Any luck identifying the cause of the issue? Is the problem something I'm doing on my side?

Jerome•11/17/23, 9:39 PM

@Tumbzilla DM'd you

JJuanWTF What would be multiple namespace in this context?

huw•11/18/23, 1:38 AM

Using the namespacenamespace option when inserting & querying vectors (undocumented beta feature)

huw•11/18/23, 1:38 AM

It’s just a simple way to segment your index

GuillaumeLakano•11/18/23, 9:20 AM

Hi! How is priced getByIds() calls please? It's not really a querying, and from what I understood the Pricing is based on stored content and querying, but not about the operation that insert inside Vectorise.