On the roadmap. Are you looking for simple delays at publish time, as part of a retry, something els

On the roadmap. Are you looking for simple delays at publish time, as part of a retry, something else?

MMatt Silverlock On the roadmap. Are you looking for simple delays at publish time, as part of a ...

Danny Navarro•11/13/23, 1:11 PM

I just want to invoke many times a cloudflare worker which will send a subrequest after 5 minutes to different targets depending on the initial parameters. For now the delay rate is fixed but in the future it may be dynamic.

Currently, we are using SQS delayed queues, but maybe with Cloudflare we don't need the queuing functionality, being able to delay may be enough. In AWS, we need some EC2 instances to be polling the queue all the time. Also, if we moved the polling to Cloudflare, we would avoid the future public IPv4 tax.

DDanny Navarro I just want to invoke many times a cloudflare worker which will send a subreques...

Matt SilverlockOP•11/13/23, 1:55 PM

Got it. A Durable Object alarm might be a better fit here, depending on what you're really trying to achieve (sounds like the delay is just one part of this).

MMatt Silverlock On the roadmap. Are you looking for simple delays at publish time, as part of a ...

huw•11/13/23, 9:55 PM

Just to piggyback on this, I’m using DO alarms to manage a per-API-key rate limit (one DO per topic / API key). I’d want the queue to only deliver

items every

seconds within a given topic. DOs satisfy this use case for now though

Hhuw Just to piggyback on this, I’m using DO alarms to manage a per-API-key rate limi...

Matt SilverlockOP•11/13/23, 10:02 PM

And just… backlog infinitely/drop older messages off the queue once they reach the retention limit, if your consumer cannot keep up / your (k, n) are too small?

MMatt Silverlock And just… backlog infinitely/drop older messages off the queue once they reach t...

huw•11/13/23, 10:11 PM

I thought about this, but I don’t think I have a good way of tracking when the last queue item was consumed or putting a lock on queue consumption without using a DO (maybe with D1, but that seems like a lot of overhead and still means a roundtrip to that DO’s colo), so I may as well just use a DO. If I flood my API with requests I get limited for 10 minutes; I’d rather drip-feed to it. But it’s been a while since I thought about this and I’m probably missing something

bharatsuthar07•11/15/23, 6:21 PM

I have attached 2 screenshots. please let me know which one is correct for batch processing of users array by using queue. should I add all 300 customers array simultaneously into message queue and then iterate them one by one on consumer side...
or Producer side only, I have to add all customers one by one into message queue by iterating? I have to do batch processing of customer array (elements of array are objects), so question is I should add this 300 customers array collectively inside message queue or one by one?
I attached screenshot for both versions, let me know which one is correct
my message queue name is batchKv

Bbharatsuthar07 I have attached 2 screenshots. please let me know which one is correct for batch...

Matt SilverlockOP•11/16/23, 2:28 AM

Neither is more correct. It’s certainly cheaper to batch them up on the producer side if you can.

MMatt Silverlock Neither is more correct. It’s certainly cheaper to batch them up on the producer...

bharatsuthar07•11/16/23, 4:28 AM

How can I batch at producer side, I don't know. Can you please edit this small part of code and resend please.
Suppose I want batch of 10. Then I have to slice 10 elements from my results array and then pass that to message queue and then consume it. Then try on next 10 batch at producer. Am I correct? You're saying that only right?

Bbharatsuthar07 How can I batch at producer side, I don't know. Can you please edit this small p...

Matt SilverlockOP•11/16/23, 11:29 AM

You are already batching by putting the entire result set into the queue as one message vs a loop over each result. I would suggest just trying out what you have - I would not get stuck on optimizing this right now if it works.

bharatsuthar07•11/16/23, 11:39 AM

Okay got it @Matt thanks

Matt SilverlockOP•11/16/23, 3:56 PM

Some updates for @Queues users:

We're working on landing HTTP Pull, which will allow you to poll a queue and consume it from outside of a Worker (or use a Worker in a poll-based flow vs. push-based). This will likely land just before/just after the holidays.
Queue throughput: our major milestone is about 3-5k msg/sec per queue (message size plays a role here), up from the ~400 msg/sec/queue currently

We're also working on landing controls around setting message delays - e.g.

await env.MY_QUEUE.send(msg, { deliveryDelay: 600 })

await env.MY_QUEUE.send(msg, { deliveryDelay: 600 })

on the producer side, and retry delays on the consumer side - e.g.

messages.batch.retryAfter(300)

messages.batch.retryAfter(300)

.retryAfter(seconds: number)

.retryAfter(seconds: number)

on a per-message basis. API not final.

Bringing Queues to GA late Q1/early Q2 next year alongside other scaling and performance improvements.

MMatt Silverlock Some updates for @Queues users: - We're working on landing HTTP Pull, which wil...

steyblind•11/16/23, 4:06 PM

Right now I've rigged data sync's to S3, which fires an object event to a Lambda, which pings a CF Worker to queue a processing job (which pulls from S3).

I'd MUCH RATHER use R2+Queues and avoid AWS altogether.

Is there an equivalent of an 'write event' I could use to populate a queue with messages as data is sync'd to R2 from [insert external platform here] (in this case, Airbyte, https://docs.airbyte.com/integrations/destinations/r2).

Ssteyblind Right now I've rigged data sync's to S3, which fires an object event to a Lambda...

Matt SilverlockOP•11/16/23, 5:14 PM

This is something on the R2 side, but we're also working on R2 Event Notifications - e.g. uploading to R2 via a Signed URL or the S3 API will publish an event to one of your Queues that you can consume.

Tumbzilla•11/16/23, 7:43 PM

set up a queue consumer that's not scaling as much as I'd expect. The queue currently has ~500k messages (max batch size 32), but the consumer is only firing every 5-10 minutes or so, and concurrency is topping out at 20, with long periods of 0 concurrency in between. All consumer invocations are succeeding.

How would I go about diagnosing the cause of this issue?

TTumbzilla set up a queue consumer that's not scaling as much as I'd expect. The queue curr...

Emilio•11/18/23, 1:11 AM

First thing I’d look at is how long the consumer script is taking to finish consuming a batch. For that you go look at the Worker metrics for the relevant script.

cg•11/18/23, 5:21 PM

Hey all! Is there a timeline for LogPush support in Queues?
It's quite hard to diagnose issues in Queues!

Paul Shriner•11/22/23, 4:38 PM

I cannot for the life of me figure out how to access Durable Objects from my consumer. I have been using itty-durable, but that has proven to be out of reach as I need the IRequest object. I would ideally like to use itty-durable, but at this point, just want it to work.

Unsmart•11/22/23, 4:42 PM

There is no request when using queue consumers... only a fetch has a request. You want to use the env which contains all of the bindings. The request also doesnt contain the bindings when in the fetch handler it is in the env parameter which is standard in all handlers.

Paul Shriner•11/22/23, 4:46 PM

Right, so when I try to do an env.DO.get("id"), it says that the id doesn't work. Hold on, let me get the exact error.

Unsmart•11/22/23, 4:47 PM

That is not a valid id... they look something like:

33ba9f42ca7b9084cf895328953209aae9da953df1a8d8f32f3832fe56

33ba9f42ca7b9084cf895328953209aae9da953df1a8d8f32f3832fe56

Unsmart•11/22/23, 4:47 PM

would also need to use

env.DO.idFromString()

env.DO.idFromString()

to transform to a DO id

Unsmart•11/22/23, 4:48 PM

or env.DO.idFromName

Paul Shriner•11/22/23, 4:48 PM

true

Paul Shriner•11/22/23, 4:48 PM

let userid = this.env.USER.idFromName(uid)
let user = this.env.USER.get(userid);
console.log(user)

Paul Shriner•11/22/23, 4:49 PM

sorry, I was shorthanding, and shouldn't have

Unsmart•11/22/23, 4:50 PM

I'd imagine you probably dont want this.this. should just be env.env.. But whats the error if thats what you have?

Unsmart•11/22/23, 4:53 PM

Example:

export default {
    async queue(batch: MessageBatch<any>, env: Bindings, ctx: ExecutionContext) {
        const stub = env.TestDO.get(env.TestDO.idFromName('1'))
        
        const response = await stub.fetch('https://fake-host/', {})
    }
}

export default {
    async queue(batch: MessageBatch<any>, env: Bindings, ctx: ExecutionContext) {
        const stub = env.TestDO.get(env.TestDO.idFromName('1'))
        
        const response = await stub.fetch('https://fake-host/', {})
    }
}

Paul Shriner•11/22/23, 5:01 PM

When I call

let userid = this.env.USER.idFromName(uid)
let user = this.env.USER.get(userid);    
let brand = await user.GetBrand()

let userid = this.env.USER.idFromName(uid)
let user = this.env.USER.get(userid);    
let brand = await user.GetBrand()

it says that the method GetBrand cannot be found that I would like to call for data access.

when I call

let userid = this.env.USER.idFromString(uid)
let user = this.env.USER.get(userid); 
let brand = await user.GetBrand()

let userid = this.env.USER.idFromString(uid)
let user = this.env.USER.get(userid); 
let brand = await user.GetBrand()

This is the error code on the second:

Invalid Durable Object ID. Durable Object IDs must be 64 hex digits.

In both cases, the uid="GF5ZNCEJLV2X4UQ5FPMAPU6ZNRQ7OXOY3JPT6OOKUDRDEGKJX35TA2Y774"

Paul Shriner•11/22/23, 5:01 PM

Granted, in my non-consumer codes, I am using itty-durable and itty router, which it seems is not available here.

Unsmart•11/22/23, 5:11 PM

GetBrand is not a valid thing on durable objects you can only do fetch calls. An RPC like API is in the works though that would allow direct function calls.

Paul Shriner•11/22/23, 5:12 PM

Ahh, that makes sense. I can hit those methods with itty Durable, but not this way.

Paul Shriner•11/22/23, 5:16 PM

When I print out the user

console.log(JSON.stringify(user))

console.log(JSON.stringify(user))

It return an unpopulated object.

Paul Shriner•11/22/23, 5:19 PM

I will just pour through the itty-code and figure out what I can, I will post back what I figure out in case anyone else runs into this.

MMatt Silverlock Some updates for @Queues users: - We're working on landing HTTP Pull, which wil...

switz•11/22/23, 7:04 PM

huge!! very much waiting for this feature, will get me off SQS entirely.

switz•11/22/23, 7:04 PM

and subsequently off s3

quambo•11/22/23, 10:23 PM

Does unstable_devunstable_dev work with queues? I've got 2 workers locally, one setup as consumer, one as producer. When the producer sends into the queue, the consumer does not react. Is this supposed to work in local dev?

Qquambo Does `unstable_dev` work with queues? I've got 2 workers locally, one setup as c...

quambo•11/22/23, 10:35 PM

Doesnt work as it seems, from Docs:
Wrangler does not yet support running separate producer and consumer Workers bound to the same Queue locally. To develop locally with Queues, you can temporarily put your consumer’s queue() handler in the same Worker as your producer, so the same Worker acts as both a producer and consumer.

PPaul Shriner I will just pour through the itty-code and figure out what I can, I will post b...

Paul Shriner•11/23/23, 5:16 AM

OK, got it. And the solution was itty-durable related, so...

If you are using the consumer of the queue, and are trying to pull a DO without using itty-router. This is how I solved it.

I used the proxyDurable class which isn't well documented as of writing this. The key though was not to just pass in the binding, but to also pass in the name of the binding in the options argument.

My binding was called "USER", so I would access it by env.USER which is the primary argument in proxyDurable.

let user = proxyDurable(this.env.USER, { name: "USER", parse: true })

let user = proxyDurable(this.env.USER, { name: "USER", parse: true })

then allows me to call the specific DO that I am looking for.

user.get(uid)

user.get(uid)

cg•11/23/23, 6:13 PM

Are Queues down at the moment, I'm seeing Service Temporarily UnavailableService Temporarily Unavailable

cg•11/23/23, 6:13 PM

Is there a Queues status page I can check?

Ccg Are Queues down at the moment, I'm seeing `Service Temporarily Unavailable`

Matt SilverlockOP•11/23/23, 7:23 PM

Can you expand how you’re getting this error? I don’t see any service wide issues.

cg•11/23/23, 7:25 PM

From within a worker, I'm invoking sendBatchsendBatch . This error is being logged to my 3rd party logging infra

cg•11/23/23, 7:26 PM

The pattern here is that the consumer is calling sendBatch to process the next "page" of data

cg•11/23/23, 7:26 PM

as to avoid the 1000 sub request limit

TTom Hi, I'm getting an error on a dead-letter queue consumer that I am unable to ex...

Matt SilverlockOP•11/23/23, 7:29 PM

We suspect this is a bug between the content-type option & DLQs.

Ccg From within a worker, I'm invoking `sendBatch` . This error is being logged to m...

Matt SilverlockOP•11/23/23, 7:29 PM

Can you share your account ID? (it’s safe to share here)

cg•11/23/23, 7:29 PM

Sure, give me a sec

On the roadmap. Are you looking for simple delays at publish time, as part of a retry, something els

Similar Threads

Similar Threads

Similar Threads