yea the issue isn't the usage model, but that there's actual old Workers Paid Plans that you could b

Eelio Already done that, I still have many workers on the old bundled but my default p...

E

elio•11/16/23, 8:31 PM

and you are right, just checked another account I have with cloudflare and there is it, the Logs menu, the question is, should I try to disable and enable workers paid plan?

CChaika yea the issue isn't the usage model, but that there's actual old Workers Paid Pl...

E

elio•11/16/23, 8:33 PM

the account I'm having trouble is showing "404 | We can't find the page you're looking for." on that page, the new account is showing the correct page, surely I'm a very early adopter of the workers paid plan on this account with problems

Eelio the account I'm having trouble is showing "404 | We can't find the page you're l...

C

ChaikaOP•11/16/23, 8:39 PM

Interesting, yea if you signed up to Paid Workers early could def be that older plan issue. I think you might just have to ticket, not sure if it would be either Billing or Account

CChaika Interesting, yea if you signed up to Paid Workers early could def be that older ...

E

elio•11/17/23, 2:34 AM

and I tried to de-activate and activate the workers paid plan only to be welcomed with a we don't support re-enabling it until the billing cycle ends

Eelio and I tried to de-activate and activate the workers paid plan only to be welcome...

C

Cyb3r-Jak3•11/17/23, 2:36 AM

Yeah at this point I feel account ticket is probably the best way

CCyb3r-Jak3 Yeah at this point I feel account ticket is probably the best way

E

elio•11/17/23, 2:38 AM

this was the response:

Hi there,

Thank you for contacting Cloudflare Support, we are sorry that you are experiencing some difficulties.

Unfortunately, as of right now, a cancelled subscription cannot be re-instated. Once your current subscription has completed cancelled , then you can set up a new subscription.

We apologize for the inconveniences,

C

Cyb3r-Jak3•11/17/23, 2:57 AM

For which issue? The subscription issue or unable to create logpush jobs one?

CCyb3r-Jak3 For which issue? The subscription issue or unable to create logpush jobs one?

E

elio•11/17/23, 3:02 AM

re-enable workers paid plan, the other issue is still pending on the account tickets section

E

elio•11/17/23, 3:06 AM

probably they are still dealing with issues from the last downtime.. but I'm worried about this client spending almost 1000$ monthly and still getting problems with support

M

Mini•11/17/23, 5:58 AM

was looking to enable web analytics but i enabled Analytics Engine too, how do i turn it off ? or let it be ?

B

Bram•11/17/23, 12:34 PM

Hi all, I had a question around the service bindings. One thing that is very convenient is that you can easily bind any cloudflare service into your workers (database, r2, kv, etc) without having to deal with credentials and connection details.

So I was hoping that service-to-service bindings would work in a similar fashion, namely that I could just

ctx.otherService.fetch("/some/relative/path")

ctx.otherService.fetch("/some/relative/path")

that would call that service through an internal network. However, that seems not to be the case, I now have to bind the service, but also somehow configure the url of how to access that service.

I am probably missing some context here, and maybe there is a technical implication that makes this non-trivial to implement, but imo would be very convenient DX if you can just call directly into another service without needing additional configuration.

BBram Hi all, I had a question around the service bindings. One thing that is very con...

B

Bram•11/17/23, 12:35 PM

or am I misunderstanding how service bindings are supposed to be used?

E

Eusebio Trigo•11/17/23, 12:38 PM

You can use service to service as

const authResponse = await env.auth.fetch(request.clone());

const authResponse = await env.auth.fetch(request.clone());

EEusebio Trigo You can use service to service as `const authResponse = await env.auth.fetch...

B

Bram•11/17/23, 12:40 PM

both services then need to have the same route?

A

Ashley•11/17/23, 12:40 PM

You create your own request, and you can use any URL you like.

A

Ashley•11/17/23, 12:41 PM

You can hit the binded worker with example.com/whatever if you want

AAshley You create your own request, and you can use any URL you like.

B

Bram•11/17/23, 12:41 PM

any url? I tried with a relative one and that didn't work

A

Ashley•11/17/23, 12:41 PM

It needs a host

A

Ashley•11/17/23, 12:41 PM

But it can be any host

AAshley But it can be any host

B

Bram•11/17/23, 12:42 PM

that is good to know, I understand that the binding is identical to

Fetcher

Fetcher

that a worker implements, but it is a bit confusing that you must pass a host, while in fact it is not used at all...

K

kian•11/17/23, 12:43 PM

Probably for the best so

new URL(req.url)

new URL(req.url)

doesn't break in Service Bindings/Durable Objects

B

Bram•11/17/23, 12:44 PM

anyway thanks for clarifying guys : )

B

Bram•11/17/23, 12:46 PM

one last thing to double check, let's say worker A has a service binding to worker B, and worker B shoud not be accesible from the outside world, I can simply remove all routes of worker B and only communicate with this worker through the service binding of worker A, right?

E

Erisa•11/17/23, 12:49 PM

Correct

B

Bram•11/17/23, 12:49 PM

Great, thanks again everyone

A

Ashley•11/17/23, 12:50 PM

You can set workers_dev = false in wrangler.toml too, just so there’s no URLs generated for it even in dev

B

Bram•11/17/23, 12:52 PM

Good tip, thanks

J

Jeff•11/17/23, 5:18 PM

Does cloudflare have a table displaying what features do and dont work within: Zone, workers.dev, miniflare/local?

Z

zegevlier•11/17/23, 5:22 PM

Not that I know of

Z

zegevlier•11/17/23, 5:23 PM

Any specific features you're curious about?

T

Torzak•11/17/23, 10:07 PM

Hello everyone,

I'm doing a quick test in a worker via the quick editor. I declare a simple global variable that increment by 1 on each request. In preview mode in all goes well 1 +1 +1+ 1 ... BUT when I deploy the worker code in production, the updates go from 3, 5 ,7, 9... each time +2. Is this normal behavior? I may have missed something about how worker works....

Capture_decran_2023-11-17_a_23.03.43.png

T

Torzak•11/17/23, 10:08 PM

this code run here ---> https://worker-fancy-salad-9347.cloudflare-c12.workers.dev/

T

Torzak•11/17/23, 10:13 PM

But of course.... It's obvious now you say it. I use Pages more often and I didn't think that the Worker would handle the favicon request as well!! Thank you so much Leo!!!!

T

Torzak•11/17/23, 10:14 PM

I'm going back to hide in shame :p

I

iCrashed•11/18/23, 12:38 AM

I want to receive in-app feedback from mobile users. Server side, I need to verify a key with a Google Play API. Would waiting for Google's response count against my worker's CPU time? Am I approaching this right?

IiCrashed I want to receive in-app feedback from mobile users. Server side, I need to veri...

C

Cyb3r-Jak3•11/18/23, 1:04 AM

Not unless you use unbound workers. Standard and Bundled plans only count for IO time

W

warflash•11/18/23, 1:07 PM

Do we need to redeploy workers after changing to standard billing in order for it to switch?

S

Stefatorus•11/18/23, 1:16 PM

Is it normal for HTMLRewriter to output garbled characters?

Link element, tag: fn&Ī*k�<�ʣ

Link element, tag: fn&Ī*k�<�ʣ

\

S

Stefatorus•11/18/23, 1:16 PM

  let rewriter = new HTMLRewriter().onDocument(new DocumentHandler(context))
    .on("*", new LinkHandler(context))
    .on("*", new AttributeTranslationHandler(context));

  // Add element text translation handler for all elements that are allowed to be translated
  for (let element of config.translation["translate-behaviour"]["allowed-tags"]) {
    rewriter = rewriter.on(`[${element}]`, new AttributeTranslationHandler(context));
  }

  return rewriter.transform(fetchResult);

  let rewriter = new HTMLRewriter().onDocument(new DocumentHandler(context))
    .on("*", new LinkHandler(context))
    .on("*", new AttributeTranslationHandler(context));

  // Add element text translation handler for all elements that are allowed to be translated
  for (let element of config.translation["translate-behaviour"]["allowed-tags"]) {
    rewriter = rewriter.on(`[${element}]`, new AttributeTranslationHandler(context));
  }

  return rewriter.transform(fetchResult);

  let rewriter = new HTMLRewriter().onDocument(new DocumentHandler(context))
    .on("*", new LinkHandler(context))
    .on("*", new AttributeTranslationHandler(context));

  // Add element text translation handler for all elements that are allowed to be translated
  for (let element of config.translation["translate-behaviour"]["allowed-tags"]) {
    rewriter = rewriter.on(`[${element}]`, new AttributeTranslationHandler(context));
  }

  return rewriter.transform(fetchResult);

  let rewriter = new HTMLRewriter().onDocument(new DocumentHandler(context))
    .on("*", new LinkHandler(context))
    .on("*", new AttributeTranslationHandler(context));

  // Add element text translation handler for all elements that are allowed to be translated
  for (let element of config.translation["translate-behaviour"]["allowed-tags"]) {
    rewriter = rewriter.on(`[${element}]`, new AttributeTranslationHandler(context));
  }

  return rewriter.transform(fetchResult);

S

Stefatorus•11/18/23, 1:17 PM

class LinkHandler implements HTMLRewriterElementContentHandlers {

  // Current URL
  context: EventContext<any, any, any>;
  currentURL: string;

  constructor(context: EventContext<any, any, any>) {
    this.context = context;
    this.currentURL = context.request.url;
  }

  // Go through all attributes in the config (src, href, etc) and rewrite them to the correct URI
  element(element: Element) {
    // Show the element type and id
    console.log(`Link element, tag: ${element.tagName}`);
    // // Check if the element has any rewriteable attributes
    for (let attribute of config["reverse-proxy"]["proxied-attributes"]) {
      // Check if the element has the attribute
      if (!element.getAttribute(attribute)) {
        // Rewrite the attribute
        continue;
      }

      // Check the current locale, and prepend it to the URL in the attribute
      let currentLocale = getCurrentLocale(new URL(this.currentURL));

      // If no current locale, then continue
      if (!currentLocale) {
        continue;
      }

      // Replace the "target-url" with "target-url"/currentLocale/
      let new_attribute = element.getAttribute(attribute).replace(config["reverse-proxy"]["target-url"], `${config["reverse-proxy"]["target-url"]}/${currentLocale}`);

      // If it's different, then log it and change it
      if (new_attribute == element.getAttribute(attribute)) {
        continue;
      }

      console.log("Changed attribute from " + element.getAttribute(attribute) + " to " + new_attribute + " for attribute " + attribute + " on element " + element.tagName);
      element.setAttribute(attribute, new_attribute);
    }

    // Kma
  }
}

class LinkHandler implements HTMLRewriterElementContentHandlers {

  // Current URL
  context: EventContext<any, any, any>;
  currentURL: string;

  constructor(context: EventContext<any, any, any>) {
    this.context = context;
    this.currentURL = context.request.url;
  }

  // Go through all attributes in the config (src, href, etc) and rewrite them to the correct URI
  element(element: Element) {
    // Show the element type and id
    console.log(`Link element, tag: ${element.tagName}`);
    // // Check if the element has any rewriteable attributes
    for (let attribute of config["reverse-proxy"]["proxied-attributes"]) {
      // Check if the element has the attribute
      if (!element.getAttribute(attribute)) {
        // Rewrite the attribute
        continue;
      }

      // Check the current locale, and prepend it to the URL in the attribute
      let currentLocale = getCurrentLocale(new URL(this.currentURL));

      // If no current locale, then continue
      if (!currentLocale) {
        continue;
      }

      // Replace the "target-url" with "target-url"/currentLocale/
      let new_attribute = element.getAttribute(attribute).replace(config["reverse-proxy"]["target-url"], `${config["reverse-proxy"]["target-url"]}/${currentLocale}`);

      // If it's different, then log it and change it
      if (new_attribute == element.getAttribute(attribute)) {
        continue;
      }

      console.log("Changed attribute from " + element.getAttribute(attribute) + " to " + new_attribute + " for attribute " + attribute + " on element " + element.tagName);
      element.setAttribute(attribute, new_attribute);
    }

    // Kma
  }
}

class LinkHandler implements HTMLRewriterElementContentHandlers {

  // Current URL
  context: EventContext<any, any, any>;
  currentURL: string;

  constructor(context: EventContext<any, any, any>) {
    this.context = context;
    this.currentURL = context.request.url;
  }

  // Go through all attributes in the config (src, href, etc) and rewrite them to the correct URI
  element(element: Element) {
    // Show the element type and id
    console.log(`Link element, tag: ${element.tagName}`);
    // // Check if the element has any rewriteable attributes
    for (let attribute of config["reverse-proxy"]["proxied-attributes"]) {
      // Check if the element has the attribute
      if (!element.getAttribute(attribute)) {
        // Rewrite the attribute
        continue;
      }

      // Check the current locale, and prepend it to the URL in the attribute
      let currentLocale = getCurrentLocale(new URL(this.currentURL));

      // If no current locale, then continue
      if (!currentLocale) {
        continue;
      }

      // Replace the "target-url" with "target-url"/currentLocale/
      let new_attribute = element.getAttribute(attribute).replace(config["reverse-proxy"]["target-url"], `${config["reverse-proxy"]["target-url"]}/${currentLocale}`);

      // If it's different, then log it and change it
      if (new_attribute == element.getAttribute(attribute)) {
        continue;
      }

      console.log("Changed attribute from " + element.getAttribute(attribute) + " to " + new_attribute + " for attribute " + attribute + " on element " + element.tagName);
      element.setAttribute(attribute, new_attribute);
    }

    // Kma
  }
}

class LinkHandler implements HTMLRewriterElementContentHandlers {

  // Current URL
  context: EventContext<any, any, any>;
  currentURL: string;

  constructor(context: EventContext<any, any, any>) {
    this.context = context;
    this.currentURL = context.request.url;
  }

  // Go through all attributes in the config (src, href, etc) and rewrite them to the correct URI
  element(element: Element) {
    // Show the element type and id
    console.log(`Link element, tag: ${element.tagName}`);
    // // Check if the element has any rewriteable attributes
    for (let attribute of config["reverse-proxy"]["proxied-attributes"]) {
      // Check if the element has the attribute
      if (!element.getAttribute(attribute)) {
        // Rewrite the attribute
        continue;
      }

      // Check the current locale, and prepend it to the URL in the attribute
      let currentLocale = getCurrentLocale(new URL(this.currentURL));

      // If no current locale, then continue
      if (!currentLocale) {
        continue;
      }

      // Replace the "target-url" with "target-url"/currentLocale/
      let new_attribute = element.getAttribute(attribute).replace(config["reverse-proxy"]["target-url"], `${config["reverse-proxy"]["target-url"]}/${currentLocale}`);

      // If it's different, then log it and change it
      if (new_attribute == element.getAttribute(attribute)) {
        continue;
      }

      console.log("Changed attribute from " + element.getAttribute(attribute) + " to " + new_attribute + " for attribute " + attribute + " on element " + element.tagName);
      element.setAttribute(attribute, new_attribute);
    }

    // Kma
  }
}

\

S

Stefatorus•11/18/23, 1:26 PM

Attribute translator -  tag: z�                                                                                                                                                                                                     
Link element, tag: l$¶x��t��Śfo�k[����ң☺�e؜��                                                                                                                                                                                       
Attribute translator -  tag: l$¶x��t��Śfo�k[����ң☺�e؜��                                                                                                                                                                             
Link element, tag: p�޳�0�#|�♠���$�ӌ�◄§�-f}tda�"~w��+�?ͩ�f+k���m�y@�p��7��▲��                                                                                                                                                        
Attribute translator -  tag: p�޳�0�#|�♠���$�ӌ�◄§�-f}tda�"~w��+�?ͩ�f+k���m�y@�p��7��▲��

Attribute translator -  tag: z�                                                                                                                                                                                                     
Link element, tag: l$¶x��t��Śfo�k[����ң☺�e؜��                                                                                                                                                                                       
Attribute translator -  tag: l$¶x��t��Śfo�k[����ң☺�e؜��                                                                                                                                                                             
Link element, tag: p�޳�0�#|�♠���$�ӌ�◄§�-f}tda�"~w��+�?ͩ�f+k���m�y@�p��7��▲��                                                                                                                                                        
Attribute translator -  tag: p�޳�0�#|�♠���$�ӌ�◄§�-f}tda�"~w��+�?ͩ�f+k���m�y@�p��7��▲��

Attribute translator -  tag: z�                                                                                                                                                                                                     
Link element, tag: l$¶x��t��Śfo�k[����ң☺�e؜��                                                                                                                                                                                       
Attribute translator -  tag: l$¶x��t��Śfo�k[����ң☺�e؜��                                                                                                                                                                             
Link element, tag: p�޳�0�#|�♠���$�ӌ�◄§�-f}tda�"~w��+�?ͩ�f+k���m�y@�p��7��▲��                                                                                                                                                        
Attribute translator -  tag: p�޳�0�#|�♠���$�ӌ�◄§�-f}tda�"~w��+�?ͩ�f+k���m�y@�p��7��▲��

Attribute translator -  tag: z�                                                                                                                                                                                                     
Link element, tag: l$¶x��t��Śfo�k[����ң☺�e؜��                                                                                                                                                                                       
Attribute translator -  tag: l$¶x��t��Śfo�k[����ң☺�e؜��                                                                                                                                                                             
Link element, tag: p�޳�0�#|�♠���$�ӌ�◄§�-f}tda�"~w��+�?ͩ�f+k���m�y@�p��7��▲��                                                                                                                                                        
Attribute translator -  tag: p�޳�0�#|�♠���$�ӌ�◄§�-f}tda�"~w��+�?ͩ�f+k���m�y@�p��7��▲��

S

Stefatorus•11/18/23, 1:26 PM

Not sure why it behaves like this

S

Stefatorus•11/18/23, 1:31 PM

Seems to be wrangler-related

S

Stefatorus•11/18/23, 1:34 PM

Note: Fixed by downgrading to wrangler 2.x

Wwarflash Do we need to redeploy workers after changing to standard billing in order for i...

C

Cyb3r-Jak3•11/18/23, 1:45 PM

Workers should auto redeploy when you change the plan

CCyb3r-Jak3 Workers should auto redeploy when you change the plan

W

warflash•11/18/23, 1:48 PM

Thanks. Based on the docs and info I found I assumed the same when I changed it a few weeks ago. Though our unbound request count is now at 10 million and standard at 150. So I suspect something might have gone wrong. Guess I'll try a manual redeploy

Wwarflash Thanks. Based on the docs and info I found I assumed the same when I changed it ...

C

Cyb3r-Jak3•11/18/23, 2:14 PM

If you have unbound in your wrangler file then you’ll need to change it there as well

CCyb3r-Jak3 If you have unbound in your wrangler file then you’ll need to change it there as...

W

warflash•11/18/23, 3:03 PM

Ah yes, that was it. Thanks! Surprisingly it does seem like the standard model is going to be like 50% more expensive than unbound even though the calculator sound it'll be 70% cheaper. Odd

yea the issue isn't the usage model, but that there's actual old Workers Paid Plans that you could b

Similar Threads

Similar Threads

Similar Threads