go into the USB root and navigate to `EFI/fedora/` and copy `grubx64.efi` and paste it into the `EFI

go into the USB root and navigate to

EFI/fedora/

EFI/fedora/

and copy

grubx64.efi

grubx64.efi

and paste it into the

EFI/BOOT/

EFI/BOOT/

, then rename BOOTX64.EFI to something else and now rename

grubx64.efi

grubx64.efi

in the BOOT folder to

BOOTX64.EFI

BOOTX64.EFI

that should fix the

image not supported

image not supported

issue and odd bioses refusing to boot the usb

HikariKnightOP•11/28/23, 9:39 PM

@KyleGospo ^ thats also some workaround for you to add to your list of tricks too, as if they get that error, stock atomic fedora might also get the same issue

Aalice boo-tris (she/they)anyone see really slow network transfer speeds? everything says i'm connecting ...

alice boo-tris (she/they)•11/28/23, 9:43 PM

interesting, it's working fine now. no reboot or anything. of note, this was behaving this way for all net traffic from my device, even from my server on my lan it was crawling. attended a work meeting and now i'm seeing 0.5Gbps.

HHikariKnight go into the USB root and navigate to `EFI/fedora/` and copy `grubx64.efi` and pa...

VoidedKN0X•11/28/23, 9:56 PM

It was something stupid to fix tbh i just used legacy boot for the usb and it booted immediatly

VVoidedKN0X It was something stupid to fix tbh i just used legacy boot for the usb and it bo...

HikariKnightOP•11/28/23, 9:59 PM

yeah but from experience some installers will install the system in the mode the system was booted from
legacy --> bios/mbr install
uefi --> uefi install

HikariKnightOP•11/28/23, 10:00 PM

and lets not forget some laptops have legacy mode completely ripped out now

VoidedKN0X•11/28/23, 10:04 PM

I wanted to install efi mode but i couldn't for the life of it enter that efi partition on my usb

EyeCantCU•11/28/23, 10:10 PM

Desktop images (sans NVIDIA, probably needs a rebuild) are updated. Deck images are not atm. Will take a closer look in about half an hour

EyeCantCU•11/28/23, 10:14 PM

@KyleGospo removing kmods from an image might not be possible. We'd need something like cliwrap install-to-root but for removals (maybe it works both ways?)

EEyeCantCU @KyleGospo removing kmods from an image might not be possible. We'd need somethi...

Kyle Gospo•11/28/23, 10:14 PM

That's fine, we can pull that out. I need to adjust which ones are installed against fsync anyway

EyeCantCU•11/28/23, 10:14 PM

Sounds good

Valerie•11/28/23, 10:19 PM

waydroid service nnot working

Kyle Gospo•11/28/23, 10:19 PM

Did you turn off SE linux?

Valerie•11/28/23, 10:20 PM

set to permissive and rebooted

KKyle Gospo Did you turn off SE linux?

Valerie•11/28/23, 10:20 PM

nvm it didnt change

Aamelia is Miraclecast (open source Miracast) installed on Bazzite out of the box?

BearFOX•11/28/23, 10:22 PM

I want to say no. It's not something I've come across in use, or seen in a feature list.

KKyle Gospo Did you turn off SE linux?

Valerie•11/28/23, 10:25 PM

How can I change the Res of waydroid/Weston?

VValerie How can I change the Res of waydroid/Weston?

Kyle Gospo•11/28/23, 10:31 PM

/etc/default

Kyle Gospo•11/28/23, 10:31 PM

There's a Waydroid launcher file in thrre

Kyle Gospo•11/28/23, 10:31 PM

Which holds the resolution

Kyle Gospo•11/28/23, 10:31 PM

Among other things

KKyle Gospo There's a Waydroid launcher file in thrre

Valerie•11/28/23, 10:31 PM

Cool thanks :)

Valerie•11/28/23, 10:31 PM

Waydroid just needs a command iirc

Kyle Gospo•11/28/23, 10:32 PM

It's because we also have to change the resolution of the wrapping Weston

Kyle Gospo•11/28/23, 10:32 PM

So this handles that

Kyle Gospo•11/28/23, 10:32 PM

Better than it being hard coded

Kyle Gospo•11/28/23, 10:32 PM

Or guessed from the current display config

KKyle Gospo It's because we also have to change the resolution of the wrapping Weston

Valerie•11/28/23, 10:33 PM

Yeah I know, works fine tho.

Valerie•11/28/23, 10:33 PM

Maybe put that on the docs @nickname

HHikariKnight go into the USB root and navigate to `EFI/fedora/` and copy `grubx64.efi` and pa...

VoidedKN0X•11/28/23, 10:45 PM

That file already exists in the efi folder, the fedora folder however does not exist

Icy•11/28/23, 11:12 PM

When I installed bazzite, my ntfs drives were populated automatically. In trying to fix something else, I removed the default mount point for one and set it as something else. Now I am having trouble figuring out where the initial mounting configuration is stored so I can/how to revert it to that. Where should I start looking?
KDE Partition Manager works with /etc/fstab, which doesn't seem to have anything for the initally configured drive.

Edit: Anyone finding this, if you're dealing with an ntfs volume with a windows installation, it will mount read-only if windows is hibernated. Shut down fully with Shutdown in windows.
Also, remove the line from /etc/fstab and mount with sudo mount path|guid mountpoint

dnkmmr•11/28/23, 11:39 PM

hey I noticed that there has been some successful builds and some not successful, what would make some succede and others not

Ddnkmmr hey I noticed that there has been some successful builds and some not successful...

Valerie•11/28/23, 11:42 PM

Usually some components will fail

Valerie•11/28/23, 11:43 PM

That's why broken images usually come in groups

Valerie•11/28/23, 11:43 PM

e.g. all deck builds will fail

Valerie•11/28/23, 11:43 PM

All nvidia builds

Valerie•11/28/23, 11:43 PM

etc. etc.

Valerie•11/28/23, 11:43 PM

For example, most recently the Deck and Nvidia images failed

Valerie•11/28/23, 11:44 PM

Except for asus-deck apparently, probably a quirk of that image

dnkmmr•11/28/23, 11:44 PM

I've noticed this in the log of bazzite-deck:kinoite

dnkmmr•11/28/23, 11:45 PM

error: This system was not booted via libostree.

error: This system was not booted via libostree.

Ddnkmmr ``` error: This system was not booted via libostree. ```

Valerie•11/28/23, 11:45 PM

Which I'm assuming is how it know it failed?

Valerie•11/28/23, 11:45 PM

But again, as said in the past

Valerie•11/28/23, 11:45 PM

Build failures are normal and expected

VValerie Build failures are normal and expected

dnkmmr•11/28/23, 11:46 PM

but I don't think it failing over 8 days is normal

Valerie•11/28/23, 11:46 PM

Yes, it can be

VValerie Maybe put that on the docs @nickname

tryhardsoccermomswag•11/28/23, 11:46 PM

yeah i can... i got home from work rn so give me a second

Ttryhardsoccermomswag yeah i can... i got home from work rn so give me a second

Valerie•11/28/23, 11:47 PM

How dare you

VValerie Yes, it can be

Valerie•11/28/23, 11:47 PM

I'm pretty sure the people working bazzite keep an eye on what builds

VVoidedKN0X That file already exists in the efi folder, the fedora folder however does not e...

HikariKnightOP•11/29/23, 12:02 AM

It's the BOOTX64.EFI that the UEFI on that computer doesn't like, just grab the grubx64.efi from whatever the other folder is called and replace BOOTX64.EFI with it.

dnkmmr•11/29/23, 12:23 AM

we gettin successful builds

go into the USB root and navigate to `EFI/fedora/` and copy `grubx64.efi` and paste it into the `EFI

Similar Threads

Similar Threads

Similar Threads