AWith a 10cm extension
WAny drawbacks? is 20cm extension too much?
Tare there any beginners guides on how to design a joystick base?
MYeah forces of direct coupled controls load up on the same inverse square parasitic drag does
MPlus friction
Iany of you could share his configuration for the apache, please?
INew to the Rhino , fly a warbird IRL , I like the comparison with the Rhino,so far I am liking just spring for the stick forces.
When I add resistance or stuff it just feels a bit weird.
Still early testing.
Any recommendations on settings for stick forces on warbirds in DCS?
When I add resistance or stuff it just feels a bit weird.
Still early testing.
Any recommendations on settings for stick forces on warbirds in DCS?
WWhat do you fly?
ICJ6 Nanchang
I
I
TAre there any photos showing the internals of the VP force rhino?
WThere are a few buried in this discord, but the internals are very similar to the rhino clones in the #
diy-builds channel
diy-builds channel
PWhich email address does the message come from when it is your turn to order? I would like to save this straight away in my contacts so that it doesn't end up in the SPAM folder. It would be stupid to wait so long and miss the chance to order just because you overlooked the email in the SPAM folder.
WIt's from vp@vpforce.eu
P
thanks walmis
THi all. Looking for advice on a powered USB hub I can plug 3 Rhino devices into. Cheers.
JI just grabbed a sabrent branded one on Amazon
JWhat’s the 3rd device?
JI have pedals and stick
TCollective
JI’m jealous. I have a VPC collective I’ve been wanting to convert
TMine is home made which I am modifying and adding the VPC Blackhawk grip to.
TDoes your USB have a power adapter?
JYes. Every one of my hubs is powered
JI have 3 hubs
原Hi guys. Just wondering whether 86BLF04 can be used for those opensource rhino clone plans such as https://github.com/mabo1972/FFB-Joystick-Base-Plywood or https://github.com/protomaker964/Rhino-FFB-Clone-3D_Printed/tree/main, if the gimbal are made by metal? thx
F"Requires the VPC motor kit - 2x57BLF03 + USB kit". The clones of the rhino base typically are designed around the default motors that are used in the complete base, but that doesn't mean someone hasn't designed a base to fit the larger motors. I just haven't seen one.
FIf it has been designed for the 86blf03 it might fit, otherwise yeah good luck
原yes I saw that. Just wondering whether a metal gimbal (joystick connector, pulleys, and other mechanical parts) can handle the high torque output(aside from other issues like how to house the bigger motors), as I don't possess the knowledge to judge it or design myself...
FA full metal will 100% handle it, as that's what I'm using. Some parts like the pulley should also be fine from print, and if you use proper material and setting the gimbal should be okay from 3d print as well
原ok, thx!
FThis is a model of my setup, you can open it in onshape.com or solidworks
Assem.zip8.24MB
FAnd onshape is free
原brilliant! thank you sir
BThis is the one I have. Also Sabrent. I've never had any troubles with it at all, and I have a lot of stuff plugged into it. https://t.ly/X0PVU I'm not sure why they did this, but there are two pushbuttons on it that each allows you to turn off 6 of the ports (not sure about the 13th on the end).
Instantly Add 13 USB 2.0 Ports to Any Compatible Device Gain 13 Downstream Ports Which Offer High-Speed (480Mbps), Full-Speed (12Mbps), And Low-Speed (1.5Mbps) Easy Setup, Plug-n-Play, Hot Swappable, Hot Pluggable Backwards Compatible With 1.1 Devices and Hosts Add up to 127 Devices by Daisy-Chai...
TThank you. Very helpful.
CAny plans to ever build ffb pedals? Also very excited for when it's my turn to order.
Ghes working on the ffb implementation for the mfg crosswind pedals
Ghes pretty much done just needs to figure out a way to sell the kit i guess
CThat is awesome! I been eyeing the crosswinds for awhile.
Gthey do look sick!
BThe Crosswind is excellent. If you elect not to make it FFB, I suggest getting the optional damper and dialing the spring on the pedals way down to get more of a heli feel.
If you're a total heli guy, there are some cool things that can be 3D printed for the pedals. I printed these (although I don't have them installed since I fly airplanes too, and need the brakes). https://www.thingiverse.com/thing:4824434 There are more Crosswind goodies at https://t.ly/4tMzb
If you're a total heli guy, there are some cool things that can be 3D printed for the pedals. I printed these (although I don't have them installed since I fly airplanes too, and need the brakes). https://www.thingiverse.com/thing:4824434 There are more Crosswind goodies at https://t.ly/4tMzb
These are a very simple remix of the excellent Bar Pedals by Asherao that extend over the landing gear brake springs.
They are the perfect size to fit the Crosswind pedals submerged in a Simlab P1(X) frame.
105mm has 10mm clearance on both sides when the flight pedals are lowered inside the P1 frame.
In my case this allowed me to leave my flight...
They are the perfect size to fit the Crosswind pedals submerged in a Simlab P1(X) frame.
105mm has 10mm clearance on both sides when the flight pedals are lowered inside the P1 frame.
In my case this allowed me to leave my flight...
Download files and build them with your 3D printer, laser cutter, or CNC. Thingiverse is a universe of things.
CThank you for info! Any idea on time frame for the FFB addition to them? Or point me to where it has been discussed?
TTry a search
CThanks will do.
SIf im making a monstertech style deskmount should i extend the joystick mount to the ground with a rhino fitted (for stability?)
D@stryker990 Yes like this
DUse parco and measure the length you need for the pole that goes to the ground