How can I tell if I am on the pre order list...I submitted the request but the responding email said

How can I tell if I am on the pre order list...I submitted the request but the responding email said " thanks for filling out the pre order request...enter your details here" but there is no link to enter details.???

Bozo VFA-86OP•12/1/23, 5:31 PM

BBozo VFA-86 How can I tell if I am on the pre order list...I submitted the request but the r...

RoyMi6•12/1/23, 8:11 PM

You can direct message @VPforceBot with the message:
!info youremail@email.com

Thorluis2•12/1/23, 10:59 PM

does the winwing f16ex work with all buttons axis, and shaker while remaing recognizable to the ww software on the rhino?

Fer•12/1/23, 11:02 PM

hello hope someone can help me since yesterday mi rhino starts to pitch forward and random times and doesnt give signals to DCS, when i restart the mission everything is fine but again at random times same behavior, VPC software sends this message

Fer•12/1/23, 11:02 PM

Fer•12/1/23, 11:03 PM

well it says FFB_RemoveEffect[11]

Wwalmis This doesn't make sense

I/JG7_Moto•12/2/23, 12:06 AM

Solved the problem, NO virus, a Function key was stuck in a controller , and happened just at the moment I was in the program, embarrassing but I better tell you guys to not worry about viruses in the program.

Number481•12/2/23, 12:36 AM

Glad to hear you got it sorted and that it wasn't related to any malware in TelemFFB or on your system!

PiNKSH!T•12/2/23, 5:34 AM

@walmis hey m8, sry for the ping, when you get time could you have a look at the log for me. I've been getting x axis instability in the dcs f18 with Telem app, usually on takeoff & landings (both carrier & field) the x axis will 'rumble' with some sort of effect then the motor will cut out & I hear some beeping tone from the base, I then need to use the emergency stop on/off then the axis is back. This also happened on a long approach on a carrier landing last night, that time I could feel a few slight 'clicks' or 'bumps' in the stick before it happened. I'm thinking I likely have one of the settings wrong when I copied over old configs. Thanks for you help & time & again sry to ping I can post here or dm the log's .cvs file

I/JG7_Moto•12/2/23, 5:48 AM

I pressed reset in the config tool and now my aileron axes are reversed, how do I get them back to normal?

PPiNKSH!T @walmis hey m8, sry for the ping, when you get time could you have a look at th...

walmis•12/2/23, 6:36 AM

I think you had this before, maybe your filter settings got restored to the old ones?

II/JG7_Moto I pressed reset in the config tool and now my aileron axes are reversed, how do ...

walmis•12/2/23, 6:38 AM

The reset also resets the calibration data - you need to run the "auto calibrate" and move both axes to their extents and click invert on the x axis.
To restore the stock config - import settings file from configs/Rhino-defaults.vpconfconfigs/Rhino-defaults.vpconf

Wwalmis I think you had this before, maybe your filter settings got restored to the old ...

PiNKSH!T•12/2/23, 6:46 AM

PiNKSH!T•12/2/23, 6:46 AM

Have I stuffed something up on here?

walmis•12/2/23, 6:48 AM

Ah, I see your periodic slider is very high, that could cause a bit of interference. TelemFFB recommends value of 50%

Wwalmis Ah, I see your periodic slider is very high, that could cause a bit of interfere...

PiNKSH!T•12/2/23, 6:51 AM

oh thanks, I think that was supposed to be for IL2 only??

PiNKSH!T•12/2/23, 6:52 AM

*sry I mean having it high for IL2

walmis•12/2/23, 6:53 AM

TelemFFB is developed with 50% as a default, so with slider at 100% the rumble effects will be too harsh

Wwalmis TelemFFB is developed with 50% as a default, so with slider at 100% the rumble e...

PiNKSH!T•12/2/23, 6:54 AM

ah cool, thanks I've changed that now to 50%. What about when not using telemFFB eg. playing IL2?

walmis•12/2/23, 6:55 AM

Set it to your preference

walmis•12/2/23, 6:56 AM

Also if you really want high rumbles, you can lower the Periodic LPF - to 15-10Hz to keep it from going to failsafe

Wwalmis Also if you really want high rumbles, you can lower the Periodic LPF - to 15-10H...

PiNKSH!T•12/2/23, 6:57 AM

oh nice, I might test it out, have a bit of a play with the slider & the LPF between 10 - 15Hz

Wwalmis The reset also resets the calibration data - you need to run the "auto calibrate...

I/JG7_Moto•12/2/23, 2:01 PM

Thanks , got it, I downloaded and installed Telem FFB, want to try Telem FFB WIP latest, how do I uninstall Telem FFB?

II/JG7_Moto Thanks , got it, I downloaded and installed Telem FFB, want to try Telem FFB WIP...

Number481•12/2/23, 2:10 PM

you don't need to uninstall anything. You can just extract the new zip over top of the older TelemFFB location. Note that the very latest version has a built-in auto updater, so going forward there will no longer be a need to manually download and unzip the new versions (there have not yet been any new versions since the self updating was added)

I/JG7_Moto•12/2/23, 2:28 PM

I think I screwed something up, extracted wip version on top of the other version and now Telem FFB does not start

II/JG7_Moto I think I screwed something up, extracted wip version on top of the other versio...

Number481•12/2/23, 2:34 PM

best then to just blow away the folder (save your config.user.ini if you created one) and just extract a new install.

I/JG7_Moto•12/2/23, 2:42 PM

What do I do with the Telem file in Script folder in Saved Games? Delete it ?

I/JG7_Moto•12/2/23, 2:43 PM

Also in the folder it wont let me open any files, I get this error

I/JG7_Moto•12/2/23, 2:43 PM

I/JG7_Moto•12/2/23, 2:55 PM

And I cannot get telem to start

II/JG7_Moto Click to see attachment

Number481•12/2/23, 3:00 PM

Are you trying to run it from inside the zip?

I/JG7_Moto•12/2/23, 3:02 PM

No I unzipped it to Downloads folder, and it created a new folder

I/JG7_Moto•12/2/23, 3:03 PM

I/JG7_Moto•12/2/23, 3:05 PM

C:\Users\Jose\Downloads\VPforce-TelemFFB-wip-dbdbb26f

I/JG7_Moto•12/2/23, 3:05 PM

This is where I am trying to run it

Number481•12/2/23, 3:15 PM

you unzipped it, changed nothing, and are double clicking on 'VPforce-TelemFFB.exe' and it doesn't start?

I/JG7_Moto•12/2/23, 3:17 PM

Exactly

I/JG7_Moto•12/2/23, 3:18 PM

I start DCS, fly a plane, double clicked on VPforce-TelemFFB.exe and nothing happens

I/JG7_Moto•12/2/23, 3:19 PM

I double click on it before starting DCS and nothing happens either

Number481•12/2/23, 3:19 PM

try to run it from a command line and see what errors you see

I/JG7_Moto•12/2/23, 3:22 PM

I/JG7_Moto•12/2/23, 3:22 PM

Says is not recognized

Number481•12/2/23, 3:23 PM

you need to 'cd' to the directory where the file is first cd C:\Users\Jose\Downloads\VPforce-TelemFFB-wip-dbdbb26fcd C:\Users\Jose\Downloads\VPforce-TelemFFB-wip-dbdbb26f

I/JG7_Moto•12/2/23, 3:30 PM

I/JG7_Moto•12/2/23, 3:31 PM

Maybe better to delete everything related to TelemFFB and start from scratch?

II/JG7_Moto Maybe better to delete everything related to TelemFFB and start from scratch?

Number481•12/2/23, 3:32 PM

Well, thats what I said to do initially.. blow away the folder and re-extract the zip (but save your config.user.ini if you had created one)

I/JG7_Moto•12/2/23, 3:32 PM

Are files installed in DCS I need to delete?

I/JG7_Moto•12/2/23, 3:33 PM

Or Saved Games DCS Scripts?

II/JG7_Moto Click to see attachment

Number481•12/2/23, 3:33 PM

you need to enter the whole command first:
cd C:\Users\Jose\Downloads\VPforce-TelemFFB-wip-dbdbb26fcd C:\Users\Jose\Downloads\VPforce-TelemFFB-wip-dbdbb26f
Then you can enter:
VPforce-TelemFFB.exeVPforce-TelemFFB.exe

II/JG7_Moto Are files installed in DCS I need to delete?

Number481•12/2/23, 3:33 PM

no, you dont need to delete anything from DCS. The export script that TelemFFB adds will still be there, but its fine.

How can I tell if I am on the pre order list...I submitted the request but the responding email said

Similar Threads