Ill be home in about an hour and a half and will share then if you’re available
Ill be home in about an hour and a half and will share then if you’re available
Fi may be sleeping but can commet tomorrow hopefully
RThank you, looking forward to it
Jdoes anyone know how to do fooocus+ get an api? I read some github issue where it said to just click on API with Gradio, but it just leads to a bunch of nonsense as far as i can tell. doesn't really give any docs or endpoints that seem to do anything.
Not too familiar with the whole gradio ecosystem.
Not too familiar with the whole gradio ecosystem.
A@Dr. Furkan Gözükara hi, which tier should i join to have the face swap code setup on my system?
DGood morning
3 days ago I was able to print 2048x2048 images with 4060 8gb vram, but now I can not print.
If idle vram usage can help me in this case, thank you very much in advance.
3 days ago I was able to print 2048x2048 images with 4060 8gb vram, but now I can not print.
If idle vram usage can help me in this case, thank you very much in advance.
DRuntimeError: Not enough memory, use lower resolution (max approx. 1600x1600). Need: 6.0GB free, Have:4.2GB free
D
DWith no models or lora installed, vram usage is 2.8 vram.
DMy whole problem now is what is the cause of this and how can I use it as an effect.
DBelirttiğim gibi bütün sorunum bu ingilzce yazdım sunucuda hep öyle konuşulmuş diye belki çözümünü bilen vardır.
SSorry for taking so long to get back to you. Upon looking into it more online, it seems it is an error with if your first engine is not default. After youve made your first with default settings it will allegedly work. Ill edit this comment if it works.
EDIT: This was the solution.
EDIT: This was the solution.
SAny idea how to prevent this:
UNSUPPORTED_STATESkipping tactic 0 due to insufficient memory on requested size of 7461533184 detected for tactic 0x00
Attempting to do 1536x1024. I have 12gb vram, do you think medvram could fix it?
UNSUPPORTED_STATESkipping tactic 0 due to insufficient memory on requested size of 7461533184 detected for tactic 0x00
Attempting to do 1536x1024. I have 12gb vram, do you think medvram could fix it?
Lis it possible to use sd 1.5 based model with sdxl refiner
NHello Furkan,
I hope you are well.
As you may remember I have meticulously built both A1111 and Kohya_ss platforms according to your great tutorials.
With my last LORA training I unfortunately get broken and corrupted images like you see in the enclosed examples.
Can you please tell me what should I do to rectify this issue?
Thank you.
I hope you are well.
As you may remember I have meticulously built both A1111 and Kohya_ss platforms according to your great tutorials.
With my last LORA training I unfortunately get broken and corrupted images like you see in the enclosed examples.
Can you please tell me what should I do to rectify this issue?
Thank you.
EThe question i have with magic animate - if you use a photo of yourself and than the pre made dancing - would the resault's face looks like yours? or is it autogenerated and wouldnt look like it at all?
DI am getting the same results , i was able to avoid by
- check resolution 1024x1024 ( start with this res)
- Decrease steps to 30
- Use 2M karras sampler
- Use some other models (ProtovisionXL,NightvisionXL)
Deuler a does produce these, but it has to do with sampling step as well. in my case the last step creates these artificats. Also which lora output number are you using ? For me somewhere from 11-15 gives decent resuilts
DHow to extract lora from dreambooth model thank you
NDR.Siva thank you so much for your kind reply. I’ll implement your guiding points and will let you know of the outcome.
What do you mean by lora output number? In my training parameters I used 6 epochs so I got 6 models, each of 147,571 KB.
What do you mean by lora output number? In my training parameters I used 6 epochs so I got 6 models, each of 147,571 KB.
DYou trained dreambooth?
DThis indicates overtraining
AHello, after much frustration trying to work with a1111 and controlnets, using a1111 is an API backend service i come to you for help!
I just want someone who can link me json payload they send to a1111 running sdxl where the output makes sense compared to settings things up in the GUI:
-json payload to a1111 for any sdxl checkpoint w. controlnet they use that works, img2img and or txt2img
-also understanding in the api why i cant upload an image for controlNet for txt2img, but only in img2img
-> My problem is when using controlnet in my api call its like im doing regular img2img without the controlnet, and in the api call i cant upload my controlNet. In a1111 i can setup settings for perfect image generation for txt2img, w controlnet, but cant get the same results when running in --api mode, sending the json payload :S
I just want someone who can link me json payload they send to a1111 running sdxl where the output makes sense compared to settings things up in the GUI:
-json payload to a1111 for any sdxl checkpoint w. controlnet they use that works, img2img and or txt2img
-also understanding in the api why i cant upload an image for controlNet for txt2img, but only in img2img
-> My problem is when using controlnet in my api call its like im doing regular img2img without the controlnet, and in the api call i cant upload my controlNet. In a1111 i can setup settings for perfect image generation for txt2img, w controlnet, but cant get the same results when running in --api mode, sending the json payload :S
La11 is horrible for API usage especially with third party plugins injecting, comfy UI albeit more messy to setup at first if youre not familiar, allows for much easier flow and has native API via dev mode
NI trained lora with kohya_ss.
Aare there good guides for getting things started? Like heavy on the developer front? and i mean in general for cloud gpu / api shit / workflow everything. im looking for a hub/journy of learning which is why my question is maybe annoying, but thanks for input about comfy and api, usage.
-> thoughts on where to start with comfy api mode, or i will just google and pray result number 1 is good. But thanks either way.
-> thoughts on where to start with comfy api mode, or i will just google and pray result number 1 is good. But thanks either way.
L
GitHub
The most powerful and modular stable diffusion GUI with a graph/nodes interface. - comfyanonymous/ComfyUI
Lyou'd setup the flow in comfy the way you want, then dump it in api format, and use your favorite language of choice to send a json
AAnyway, last prayer for someone who uses a1111 with --api and can send me the payload they use for successfull image generation:
I just want someone who can link me json payload they send to a1111 running sdxl where the output makes sense compared to settings things up in the GUI:
-json payload to a1111 for any sdxl checkpoint w. controlnet they use that works, img2img and or txt2img
-also understanding in the api why i cant upload an image for controlNet for txt2img, but only in img2img
-> feel free to delete, im just begging here with mouth open
I just want someone who can link me json payload they send to a1111 running sdxl where the output makes sense compared to settings things up in the GUI:
-json payload to a1111 for any sdxl checkpoint w. controlnet they use that works, img2img and or txt2img
-also understanding in the api why i cant upload an image for controlNet for txt2img, but only in img2img
-> feel free to delete, im just begging here with mouth open
Bthere is a plugin that will show the json for api call after image generation
BI need to look up the name
Bah it is even mentioned in https://github.com/AUTOMATIC1111/stable-diffusion-webui/wiki/API
GitHub
Stable Diffusion web UI. Contribute to AUTOMATIC1111/stable-diffusion-webui development by creating an account on GitHub.
BGitHub
Display the corresponding API payload after each generation on WebUI - GitHub - huchenlei/sd-webui-api-payload-display: Display the corresponding API payload after each generation on WebUI
DJust 6 epoch?
I have 16
I have 16
Athanks a lot, but damn i feel a bit dumb rn, but fuck me thanks
Bno worries, enjoy 
Fare you sure fooocus has API version? i dont see on readme
Feven lowest tier opens all. but if you register higher thank you
Fare you using rc version? 1.7.
Fyes medvram certainly can fix
Fon foocus you are able to use i think
Fbut havent tried on automatic1111
Fyou should be
Flooks like VAE or resolution mismatch
Fshould be like yours. you can try
Fauto installer working
Fi am trying to make auto installer for dense pose generator
Fspent like 4 hours todaty
Fuse tools of Kohya GUI so easy
Fthis is a pro job. you probably need to pay a lot for a programmer
Lmagic animate seems to have a different color palette than the ones in the linked detectron repo also, or maybe it's just the fact the background is that shade of purple?
