Where does one see how much storage is being used by KV? I can never get an accurate value. I got bi

Where does one see how much storage is being used by KV? I can never get an accurate value. I got billed for 1.69GB while the KV page shows 67KB. So what gives?

Mmatt_d @izdi No, this behavior is an inescapable aspect of WorkersKV.

Advany•12/17/23, 1:00 PM

is it already as fast as 5 seconds? I though it would take up to 60 seconds to get consistent with the write

Zzehawk Where does one see how much storage is being used by KV? I can never get an accu...

Matt Silverlock•12/17/23, 1:03 PM

Please open a Support ticket here.

AAdvany is it already as fast as 5 seconds? I though it would take up to 60 seconds to g...

Matt Silverlock•12/17/23, 2:32 PM

60s for values to refresh (eventual consistency). If you read a key, you will implicitly cache the empty/null value. You can read new keys faster than 60s on first read.

Advany•12/17/23, 2:33 PM

Awesome! Just wanted to verify. Hopefully one day we will see faster refreshes but good for now!

AAdvany is it already as fast as 5 seconds? I though it would take up to 60 seconds to g...

Hello, I’m Allie!•12/17/23, 2:39 PM

This also assumes you haven’t set a higher CacheTTL

HHello, I’m Allie!This also assumes you haven’t set a higher CacheTTL

Advany•12/17/23, 3:07 PM

Yeah a while back there was talk about a new version of KV that would refresh faster even with a higher CacheTTL. There where talks of 15 seconds

AAdvany Yeah a while back there was talk about a new version of KV that would refresh fa...

Hello, I’m Allie!•12/17/23, 3:28 PM

Yeah, that was v2, but it got rolled back a while ago

bonald•12/18/23, 2:55 AM

16ms latency for kv , is this chat real? was looking the test redis vs kv . i guess theres no test to do. is this real?

kian•12/18/23, 2:56 AM

For a cached read? Sounds right to me.

Bbonald 16ms latency for kv , is this chat real? was looking the test redis vs kv . i gu...

Advany•12/18/23, 8:41 AM

a kv is cached locally using Cache. Thats why second reads on the same location are faster

HHello, I’m Allie!Yeah, that was v2, but it got rolled back a while ago

Advany•12/18/23, 8:41 AM

aaaah good to know they are still working on that!

Befus•12/20/23, 11:50 AM

How would I store an image inside KV? Not using cloudflare images

BBefus How would I store an image inside KV? Not using cloudflare images

Isaac McFadyen•12/20/23, 12:01 PM

You'd probably encode it as an ArrayBuffer. Keep in mind that will buffer the image into the Worker's RAM, but I don't think there's any way to stream directly to/from KV.

Isaac McFadyen•12/20/23, 12:01 PM

Oh actually, there is!

Isaac McFadyen•12/20/23, 12:01 PM

You can directly write a ReadableStream: https://developers.cloudflare.com/kv/api/write-key-value-pairs/

Isaac McFadyen•12/20/23, 12:02 PM

So you'd look at your request, see if it's an image that you want to upload (based on whatever factors you want), then do a

env.KV_BINDING.put("imagename", request.body)

env.KV_BINDING.put("imagename", request.body)

Isaac McFadyen•12/20/23, 12:03 PM

And then to read it back you can do a

const image = env.KV_BINDING.get("imagename", { type: "stream" });

const image = env.KV_BINDING.get("imagename", { type: "stream" });

(notice the stream part to get back as a stream)

Befus•12/20/23, 12:04 PM

Damn I'm going to try this, I will let you know!

Isaac McFadyen•12/20/23, 12:05 PM

Good luck!

IIsaac McFadyen Good luck!

Befus•12/20/23, 1:35 PM

export async function POST(req: NextRequest) {
  const formData = await req.formData();
  const file = formData.get("file") as File;
  console.log(file);
  console.log(file.type);
  console.log(file.name);
  // check if incoming data is a file and an image extension
  if (!file || !file.type.startsWith("image/")) {
    return new Response(JSON.stringify("error"), {
      headers: {
        "content-type": "application/json",
      },
    });
  }

  // if it is a file, upload the name of it to KV
  const { GALLERY } = process.env;
  const response = await GALLERY.put(file.name, file as unknown as ReadableStream<Uint8Array>);

  return new Response(JSON.stringify(response), {
    headers: {
      "content-type": "application/json",
    },
  });
}

export async function POST(req: NextRequest) {
  const formData = await req.formData();
  const file = formData.get("file") as File;
  console.log(file);
  console.log(file.type);
  console.log(file.name);
  // check if incoming data is a file and an image extension
  if (!file || !file.type.startsWith("image/")) {
    return new Response(JSON.stringify("error"), {
      headers: {
        "content-type": "application/json",
      },
    });
  }

  // if it is a file, upload the name of it to KV
  const { GALLERY } = process.env;
  const response = await GALLERY.put(file.name, file as unknown as ReadableStream<Uint8Array>);

  return new Response(JSON.stringify(response), {
    headers: {
      "content-type": "application/json",
    },
  });
}

I'm new to using KV, I seem to be getting the type error that GALLERY.put is not a function. But it does exist and I'm pretty sure it would work on production but I am testing locally now using npx cf-bindings-proxy

Isaac McFadyen•12/20/23, 1:42 PM

Hmm you're using Next?

Isaac McFadyen•12/20/23, 1:43 PM

You might want to ask in #next-on-pages, I haven't used Next at all and don't know how the bindings are supposed to work.

Isaac McFadyen•12/20/23, 1:43 PM

Also you shouldn't need to cast using Typescript - if you have the file as a File then it should be insertable by

file.readable

file.readable

I think?

Befus•12/20/23, 1:51 PM

Yea I'm using next, I will try to ask in the other channel.

There doesn't seem to be a file.readable but there is file.stream()?

IIsaac McFadyen And then to read it back you can do a `const image = env.KV_BINDING.get("imagena...

Befus•12/20/23, 2:51 PM

How would I get all images using .list?

BBefus Yea I'm using next, I will try to ask in the other channel. There doesn't seem ...

Isaac McFadyen•12/20/23, 2:58 PM

That's probably it, yeah.

BBefus How would I get all images using .list?

Isaac McFadyen•12/20/23, 2:59 PM

list

list

only shows you the keys. You need to run

get

get

on each key to get the image.

Befus•12/20/23, 3:06 PM

Happy me :)

Original message was deleted

Chaika•12/21/23, 12:36 AM

Web Assets, Cloudflare Pages uses KV for all uploaded assets. Lots of reads, not many writes

Original message was deleted

Chaika•12/21/23, 12:39 AM

I wouldn't think so. It depends on size and your budget I suppose, but R2 has a single location whereas KV has two central stores (one in NA, one in EU) and a built in caching layer.
For your own use, R2 may be cheaper though, at the cost of latency.

Chaika•12/21/23, 12:41 AM

There's a nice post on how KV works here:
https://developers.cloudflare.com/kv/learning/how-kv-works/
and overall storage options on CF
https://developers.cloudflare.com/workers/platform/storage-options/

Chaika•12/21/23, 12:42 AM

You can cache it via a custom domain, but each bucket still only lives in one region/location

Chaika•12/21/23, 12:44 AM

KV has some other cool things with Auto expiring keys via ExpirationTTL. You can have something be cached for x time and automatically be deleted to be repopulated. KV also as noted on that page can be used for configuration, like flags you change to activate features on your website

EdFletcher•12/21/23, 2:24 AM

you needn't even think of them as either/or. KV and R2 can work well together. for example say you have large binary blobs ("files") with associated structured metadata: you can store the metadata in KV with a pointer to the blob in R2. similarly with D1, you can have pointers to PKs (etc.) in a D1 DB from KV to help link K/V-style storage with relational storage.

Original message was deleted

EdFletcher•12/21/23, 2:51 AM

you bet, i'm glad it was helpful! and in fact that wasn't a contrived example either, i do those things in a set of workers i have open-sourced so you're welcome to take a gander at the code if it can be further helpful https://github.com/image-yinyang/

moody 💭•12/24/23, 2:39 PM

i could really use kv batch requests. i'm probably up to 300 requests per api call. and suspect making that many requests has a 1s+ latency overhead

Mmoody 💭i could really use kv batch requests. i'm probably up to 300 requests per api ca...

Matt Silverlock•12/24/23, 4:28 PM

What are you fetching that requires that many calls per eyeball/client request? Have you considered packing them into a larger value (and thus fewer keys) - ?

A batch read API won’t immediately solve performance issues as there isn’t a guarantee all of the keys in a batch would be hot (cached) or co-located in storage. Your batch would always be limited by the slowest read, identical to batch reads in most storage systems.

MMatt Silverlock What are you fetching that requires that many calls per eyeball/client request? ...

moody 💭•12/24/23, 4:29 PM

it would at least save cpu time

Mmoody 💭it would at least save cpu time

Matt Silverlock•12/24/23, 4:29 PM

Network calls don’t count towards CPU time on the Standard usage model.

moody 💭•12/24/23, 4:29 PM

constructing and firing 300 calls has some non-negligible overhead

moody 💭•12/24/23, 4:29 PM

i'd imagine

moody 💭•12/24/23, 4:30 PM

vs creating an array of 300 keys and firing one call

moody 💭•12/24/23, 4:31 PM

and i'm sure there is overhead in the backend for each call as well

Mmoody 💭constructing and firing 300 calls has some non-negligible overhead

Matt Silverlock•12/24/23, 4:31 PM

That is minimal vs the performance / latency issue you called out, which is why I’m suggesting you re-think your key design. Batch reads are not a panacea.

moody 💭•12/24/23, 4:34 PM

the use case is, i have a request that requires several megabytes of data from a postgresql database. i cache as much as i can in the worker memory, but for a fresh worker, i have to get all that data out of postgres.

i have 1 query that tells me all the keys that have new data (something like last updated timestamp), and then another query that gets the new data for all the keys that have seen updates.

my postgres database started getting bandwidth throttled (blue line) because of the workers fetching so much data from it. so i started storing the data for each key + last updated in kv and fetch from kv first

moody 💭•12/24/23, 4:36 PM

it is perfect for kv or redis because it's write-once (key+last-updated-ts w/ ttl)->data.

MMatt Silverlock That is minimal vs the performance / latency issue you called out, which is why ...

moody 💭•12/24/23, 4:39 PM

i think a batch read request that only reads from the most local region cache and then asynchronously requests copying to that datacenter would be ok

moody 💭•12/24/23, 5:52 PM

the other part of the latency is doing a put of each of the keys that wasnt found in the store. batch read and write are pretty important i think

MMatt Silverlock That is minimal vs the performance / latency issue you called out, which is why ...

moody 💭•12/26/23, 1:04 PM

curious if you have any ideas of how i can improve my architecture

moody 💭•12/26/23, 1:05 PM

the batch endpoint will definitely speed things up and separately i think it's also not great that multiple requests will simultaneously update the cache

export async function POST(req: NextRequest) { const formData = await req.formData(); const file = formData.get("file") as File; console.log(file); console.log(file.type); console.log(file.name); // check if incoming data is a file and an image extension if (!file || !file.type.startsWith("image/")) { return new Response(JSON.stringify("error"), { headers: { "content-type": "application/json", }, }); } // if it is a file, upload the name of it to KV const { GALLERY } = process.env; const response = await GALLERY.put(file.name, file as unknown as ReadableStream<Uint8Array>); return new Response(JSON.stringify(response), { headers: { "content-type": "application/json", }, }); }

Where does one see how much storage is being used by KV? I can never get an accurate value. I got bi

Similar Threads

Similar Threads

Similar Threads