also, interesting quirk. But sometimes after boot - I have no options to set a custom curve for my G

also, interesting quirk. But sometimes after boot - I have no options to set a custom curve for my GPU fan. I have to shutdown the GUI, restart the service with

sudo systemctl restart coolercontrold

sudo systemctl restart coolercontrold

and then the GUI shows the Custom curve option for the GPU

VarisOP•12/25/23, 4:27 PM

I imagine there's some race condition on boot preventing proper initialization

VVaris also, interesting quirk. But sometimes after boot - I have no options to set a c...

_cryptagion•12/25/23, 4:28 PM

on my system, at least, the GPU fan curve is controlled by the greenwithenvy app bazzite offers to install on first boot

_cryptagion•12/25/23, 4:28 PM

should that be uninstalled?

_cryptagion•12/25/23, 4:28 PM

if I use coolercontrol

__cryptagion on my system, at least, the GPU fan curve is controlled by the greenwithenvy app...

VarisOP•12/25/23, 4:29 PM

I don't think so, but they might interfere with each other. I guess they use the same interfaces to set the speeds

VarisOP•12/25/23, 4:30 PM

I have set greenwithenvy to AUTO and use coolercontrol, since the latter handles more stuff

RogerLovesYou ❤•12/25/23, 4:31 PM

Hello everyone, Merry Xmas.
Question, I got a new SD card, and for whatever reason (I’m assuming Bazzite) auto mounts its factory exfat file system. The last sd card I had failed after about 3 months of use, and while I understand Bazzite wasn’t at fault, I remember hearing stories of the Steam Deck bricking cards when using the format function. Should I keep and use the file system as is since its working? Or is the benefit too great to not use btrfs? I just don’t want a repeat losing a whole 1TB card.

Kyle Gospo•12/25/23, 4:56 PM

our default is btrfs, that's what we recommend

Kyle Gospo•12/25/23, 4:56 PM

any issues with that, fall back to the valve default of ext4

Zelaf•12/25/23, 4:57 PM

I kinda want to switch my SD card to btrfs but I also don't want to loose all my games

Zelaf•12/25/23, 4:57 PM

There's like 300GB of games on it that I can't temporarily put anywhere

VVaris also, interesting quirk. But sometimes after boot - I have no options to set a c...

_cryptagion•12/25/23, 5:13 PM

I don't think it works with my hardware, sadly. I can see temps, but there's no option to set curves for anything.

__cryptagion I don't think it works with my hardware, sadly. I can see temps, but there's no ...

VarisOP•12/25/23, 5:14 PM

have you tried the standalone appimage?

VarisOP•12/25/23, 5:14 PM

and you're talking about mobo/cpu fans, right?

_cryptagion•12/25/23, 5:15 PM

yeah

_cryptagion•12/25/23, 5:15 PM

mobo fans

_cryptagion•12/25/23, 5:15 PM

well, I can see mobo and gpu, but can't set any fan curves for either

VarisOP•12/25/23, 5:15 PM

on appimage?

VarisOP•12/25/23, 5:16 PM

or did you layer?

_cryptagion•12/25/23, 5:16 PM

I layered

_cryptagion•12/25/23, 5:16 PM

unless I'm just missing the button to edit somewhere

_cryptagion•12/25/23, 5:16 PM

I see temps and loads, but nothing else

VarisOP•12/25/23, 5:16 PM

try closing the GUI, restarting the service like I wrote and running the gui again

VarisOP•12/25/23, 5:17 PM

with

 sudo systemctl restart coolercontrold

 sudo systemctl restart coolercontrold

_cryptagion•12/25/23, 5:18 PM

nope, just the overview is there

VarisOP•12/25/23, 5:18 PM

_cryptagion•12/25/23, 5:18 PM

_cryptagion•12/25/23, 5:19 PM

that's all I got

VarisOP•12/25/23, 5:19 PM

strange

VarisOP•12/25/23, 5:19 PM

I didn't get the mobo fans, so I had to put in a separate kernel driver for those, but the GPU showed up always afaik

_cryptagion•12/25/23, 5:20 PM

the thing is, when I click the info button, it says it detects the GPU

_cryptagion•12/25/23, 5:20 PM

as well as the cpu and ssd

_cryptagion•12/25/23, 5:24 PM

hmm, I'm gonna have to figure out something that works. my fans aren't speeding up when my system is under load, which is making my gpu overheat and throttle down once it hits critical temps

VarisOP•12/25/23, 5:25 PM

greenwithenvy doesn't work either?

_cryptagion•12/25/23, 5:25 PM

no, the fans stay the same speed no matter what

_cryptagion•12/25/23, 5:26 PM

sound like they're running about 2k RPM, even when the system is idle and there's no load

_cryptagion•12/25/23, 5:26 PM

which they shut off when idle under windows since the temps are low

VarisOP•12/25/23, 5:28 PM

sounds like something's busted. I wonder if you could hook up the GPU fans to the mobo. Then you could use GPU temp data to control a mobo fan, which would actually still be on the GPU

VVaris sounds like something's busted. I wonder if you could hook up the GPU fans to th...

_cryptagion•12/25/23, 5:29 PM

that's not an option for me, I'm on a Lenovo Legion 5 gaming laptop

VarisOP•12/25/23, 5:29 PM

because it looks like you're still getting gpu temps

VarisOP•12/25/23, 5:29 PM

maybe those are iGPU temps, not dGPU?

_cryptagion•12/25/23, 5:30 PM

oh, it might be

_cryptagion•12/25/23, 5:30 PM

it says it detects my dGPU though

_cryptagion•12/25/23, 5:30 PM

VarisOP•12/25/23, 5:31 PM

specifically for your laptop model, this might be relevant - https://github.com/johnfanv2/LenovoLegionLinux

VVaris specifically for your laptop model, this might be relevant - https://github.com/...

_cryptagion•12/25/23, 5:31 PM

I tried that before, it didn't work either

_cryptagion•12/25/23, 5:31 PM

Most of the interface was greyed out and couldn't be edited

_cryptagion•12/25/23, 5:32 PM

which they say is because the hardware couldn't be monitored

VarisOP•12/25/23, 5:32 PM

looks like it uses a kernel driver. It might not be as straightforward to make it work on bazzite

VarisOP•12/25/23, 5:34 PM

worst case, you could try something like Nobara, which is also gaming-oriented, but without the atomic system stuff

also, interesting quirk. But sometimes after boot - I have no options to set a custom curve for my G

Similar Threads

Similar Threads

Similar Threads